ROCKVILLE Rock Ship 50 Watt Portable Bluetooth Speaker Owner’s Manual
- June 14, 2024
- RockVille
Table of Contents
ROCKVILLE Rock Ship 50 Watt Portable Bluetooth Speaker
Important Information
ATTENTION:
WATCH THIS VIDEO BEFORE FIRST USE!
Who reads manuals?
Scan the QR code or go to
rockvillesupport.com/rockship to
access how-to video(s), the owner’s manual, and other important information
you may need to get the most out of your item.
If you prefer written instructions, please read ahead!
With Rockville you get many options.
Rockville is proud to introduce the all new Rock Ship, a rechargeable Bluetooth speaker with huge power and a unique space saving design. Every Bluetooth speaker we manufacture has a purpose and application in mind. This one is made to be the perfect speaker for your bedroom, office desk, or kitchen. It is also perfect to take with you outside or to the beach since it is rechargeable. Please read this guide carefully for proper use of your Rockville Rock Ship rechargeable Bluetooth speaker. Should you need, assistance please call our technical help line at 1-646-758-0144, 24 hours a day!7 days a week.
FEATURES
- Rockville Rock Ship 50 Watt Bluetooth Speaker w/USB+SD+Aux ln+FM
- 50 watts peak power
- 17 watts continuous RMS
- True 2 channel stereo sound delivers top-notch sound quality
- Battery charges with included USB cable
- 2x 1800 mAH batteries! (fatal 3,600 mAH) Supports 10 hours of playback at 70% volume and 24 hours at 25% volume
- Quick Charge time: 2.5 Hours
- Extremely loud and powerful with industry-leading bass!
- True Wireless Stereo (TWS) allows you to pair two speakers for stereo sound
- Bluetooth version 5.0 with EDR (enhanced data rate)
- Bluetooth quick-connect technology pairs with your phone in 5 seconds
- A2DP audio streaming with 32 foot max Bluetooth range
- Automatically remembers and syncs with previously synced devices
- Playback Controls – Play, Pause, Skip Forward, Skip Back, Volume Up, Volume Down
- Control next song, pause, play on popular apps like Pandora, Spotify, Youtube, and others
- Cool LED light strip on bottom of speaker with controls for on/off, color, and mode
- Built-in mic allows you to make and receive phone calls hands-free
- Compatible with any Bluetooth capable devices
- Input power Input: DC5V/1.5A
- Plays back SD cards up to 32GB
- Plays USB thumb drives up to 32GB
- 3.5MM aux input (aux cable included)
- Built in FM radio with auto scan (must plug in aux cable to be used as an antenna to get good radio reception)
- Dual 2.25″ inch high quality speaker drivers “1th, rubber surrounds, and high excursion
- No distortion can be heard even at top volume
- Distortion: Less than 1 %
- Auto turn off after 15 minutes of no music to conserve battery life
- Frequency Response: 50HZ – 20KHZ
- Signal to noise ratio: 75dB
- Unit weight: 2.6 pounds
- Dimensions of Unit (L x W x H): 2.76″ x 2.68″ x 7.76″
INCLUDES
- Bluetooth speaker
- Micro USB charging cable
- 3.5mm to 3.5mm auxiliary cable
- Manual
- Warranty card
FUNCTIONS
- Function button
- Volume +/Next
- Power, Pause/Play, Answer/End call
- LED lighting control/VTWS
- Volume -/Previous
- Charging indicator LED
- Micro USB DC 5V charging port
- SD card slot
- 3.5mm AUX in/FM antenna/Reset
- USB port
OPERATION
Power ON : Long press the Power button. The unit will automatically go into Bluetooth pairing mode.
Bluetooth
Pairing: Power ON the unit or press the M button to switch to Bluetooth
mode. Look for and select Rock Ship on your Bluetooth device’s list of
available devices. You will hear a tone if pairing has been successful. If
there is no Bluetooth input, the unit will automatically power OFF after 10
minutes.
Volume Control : Press the + or – button to increase or decrease the
volume.
Skip Songs : Long press the+ or – button for the next or previous track.
Answering/Ending Calls : Double press the Play/Pause button to answer
incoming calls. Press the press Play/Pause button once to end the
conversation.
Disconnect Bluetooth : Long press the M button to unpair from
Bluetooth device.
TWS
Pairing : Power ON both units and ensure they are in Bluetooth mode. Long
press the LED button on one of the units to initiate TWS pairing. This
will be the primary unit and will control all functions. To exit TWS mode,
long press the primary unit’s LED button.
FM Radio
Radio mode : Press the M button to switch to Radio mode.
Antenna : Plug the included 3.5mm to 3.5mm cable into the AUX port. This
will act as an antenna.
Station Autos can : Press the Play/Pause button to start autos can.
Stations will be automatically saved.
Volume Control : Press the + button to increase the volume or press the –
button to decrease the volume.
Stations: Long press the + button for the next station. Long press the –
button for the previous station.
USB/SD
Insert USB flash drive or SD card (up to 32GB) into the corresponding port at
the rear of the unit. Unit will automatically begin playing music. Press
Play/Pause button to pause music.
Volume Control : Press the + or – button to increase or decrease the
volume.
Skip Songs : Long press the+ or – button for the next or previous track.
Please do not remove USB drive or SD card while in use. Doing so may damage
them.
Auxiliary
Press M button to switch to AUX mode. Use the included 3.5mm to 3.5mm
cable to connect your external audio device.
LED Lights
Press LED lighting button to turn on the LED lights. To switch between the
different lighting modes, press the LED lighting button again. There are 7
colors and 2 modes:
Steady LED light or LED flashes to the beat of the music.
Charging
When the battery charge is low, you will hear a tone indicating that the unit
must be charged as soon as possible. Connect the included micro USB cable to
the micro USB port at the rear of the unit. Connect the other to an AC adapter
(not included). Charging voltage is 5V/2A. The indicator LED will remain on
while charging and will turn off once the unit is fully charged.
Reset
The unit can be reset to its original factory via a button inside the 3.5mm
jack. Insert a pin and long press to reset.
TROUBLESHOOTING
No Power|
- Make sure the battery is fully charged.
- If not, plug the unit to a 5V/2A power source and charge for 2.5 hours for a full charge.
---|---
Bluetooth pairing fails|
- Make sure both devices are turned on and that your BT device is discoverable
- Make sure you’ve selected the proper source.
- Make sure the BT device is within 5ft of the unit.
- Move both devices away from other BT devices, microwaves, wireless routers, and other electronics.
- Make sure the unit is not paired to another device.
No SD or USB playback|
- Make sure you’re in the proper mode.
- Check that the SD card or USB flash drive is not damaged.
- Make sure that the SD card’s or USB flash drive’s capacity is no more that 32GB.
Poor FM radio reception|
- Make sure the 3.5mm cable is plugged into the AUX port as it will act as an antenna.
- Move the unit and the antenna for improved reception.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE
INFORMATION
Responsible party name: Rockville
Address: 600 Bayview Ave,
Entrance A,
Inwood, NY 11096
Hereby declares that the product Rockville Rock Ship Bluetooth speaker complies with FCC rules as mentioned in the following paragraph:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CUSTOMER SUPPORT
RockvilleAudio.com
© 2022 ROCKVILLE // Features and specifications are subject to change and/or
improvement without notice.
Missing items? If you ordered a bundle that includes more than one product and you are missing part of your bundle, then 11 Just means your order shipped from two different warehouses You will receive the remaining items very soon If you have any concerns or Inquires, feel free to call our customer support center at 1-646-758-0144, 24 hours a day/7 days a week.
