UNITECK 1824 R-RB LED Ceiling Light User Guide
- June 14, 2024
- UNITECK
Table of Contents
UNITECK 1824 R-RB LED Ceiling Light
MOUNTING
RECOMMENDATIONS
Install UNILEDLIGHT ceiling lights on surface with sufficient load bearing capacity.
| Model | Dimensions LxWxH (mm) | Weight (g) |
|---|---|---|
| UNILEDLIGHT 18.24 R | Ø 130 x 12 | 140 |
| UNILEDLIGHT 18.24 RB | Ø 130 x 12 | 140 |
| UNILEDLIGHT 12.24 L | 300 x 54 x 12 | 400 |
| UNILEDLIGHT 12.24 LB | 300 x 54 x 12 | 400 |
| UNILEDLIGHT 26.24 L | 600 x 54 x 12 | 800 |
| UNILEDLIGHT 26.24 LB | 600 x 54 x 12 | 800 |
Mounting depending on model:
UNILEDLIGHT 18.24 R / RB| UNILEDLIGHT 12.24 L / LB|
UNILEDLIGHT 26.24 L / LB
---|---|---
3 screws on front side (included)| 2 screws on front side (included)| 2 screws
on front side + 2 additional support brackets (6 screws included)
Fix the ceiling light on a flat surface thanks to its 3 screws|
- Take off protection caps situated on both ends
- Fix the ceiling light thanks to the 2 screws
- Put back protection caps
|
- Take off protection caps situated on both ends
- Fix the ceiling light thanks to the 2 screws
- Put back protection caps Additional fixing: 2 plastic support brackets
| 
| 
WIRING
UNILEDBAR can operate:
- On a 12V battery
- On a 24V battery
- On a DC voltage between 9V and 30V
- Red cable to be connected on positive (+) terminal
- Black cable to be connected on negative (-) terminal
OPERATING
Models with integrated switch:
Switch on/off light: slightly press touch button
Light adjustment: keep touch button pressed until wanted beam.
Model without integrated switch:
Switch on/off: press on your remote switch
Light adjustment: possible if the switch has this function.
TROUBLESHOOTING, CAUSES, SOLUTIONS
| Error message | Causes | Solution |
|---|---|---|
| Light does not switch on | Battery load < 9V | Charge your battery. LED light |
operates only when the battery voltage is minimum 9V.
Wrong wiring| Check your electrical connections (polarity, crimp)
TECHNICAL CHARACTERISTICS
| UNILEDLIGHT 18.24 RB| UNILEDLIGHT 12.24 LB| UNILEDLIGHT 26.24
LB
---|---|---|---
SYSTÈM|
|
|
|
|
|
Technology|
|
| LED|
|
Operating voltage|
|
| 10-30V DC|
|
Max power| 18W| 12W| 26W
Real consumption| 9W| 10W| 15W
BATTERY|
|
|
|
|
|
Battery voltage|
|
| 12/24V|
|
LIGHT|
|
|
|
|
|
Number of leds| 91 x 0.2 W| 58 x 0.2 W| 134 x 0.2 W
Lumens| 650 lm| 400 lm| 600 lm
Adjustable brightness|
|
| Yes|
|
Beam|
|
| Large 120°|
|
Color| Cold white 5800-6250 K| Neutral white 3800-4250K| Neutral white
3800-4250K
Lifespan|
|
| >50 000 hours|
|
MECHANICAL CHARACTERISTICS
| Dimensions in mm (Lxwxh) | Ø 130 x h 12 | 300 x 54 x 12 | 600 x 54 x 12 |
|---|---|---|---|
| Weight in g | 140 | 275 | 550 |
| Material |
|
| Polycarbonate|
|
Switch integrated|
|
| No|
|
Cable|
|
|
|
|
|
Length|
|
| 22 cm|
|
Type|
|
| 2 single strand cables : black and red|
|
Section|
|
| 2 x 0,33mm²|
|
Operating temperature|
|
| -20°C / +80°C|
|
Protection rate|
|
| IP67|
|
Warranty|
|
| 2 years|
|
| UNILEDLIGHT 18.24 RB| UNILEDLIGHT 12.24 LB| UNILEDLIGHT 26.24
LB
---|---|---|---
SYSTÈM|
|
|
|
|
|
Technology|
|
| LED|
|
Operating voltage|
|
| 10-30V DC|
|
Max power| 18W| 12W| 26W
Real consumption| 9W| 10W| 15W
BATTERY|
|
|
|
|
|
Battery voltage|
|
| 12/24V|
|
LIGHT|
|
|
|
|
|
Number of leds| 91 x 0.2 W| 58 x 0.2 W| 134 x 0.2 W
Lumens| 650 lm| 400 lm| 600 lm
Adjustable brightness|
|
| Yes|
|
Beam|
|
| Large 120°|
|
Color| Cold white 5800-6250 K| Neutral white 3800-4250K| Neutral white
3800-4250K
Lifespan|
|
| >50 000 hours|
|
| Dimensions in mm (Lxwxh) | Ø 130 x h 12 | 300 x 54 x 12 | 600 x 54 x 12 |
|---|---|---|---|
| Weight in g | 140 | 275 | 550 |
| Material |
|
| Polycarbonate|
|
Integrated switch|
|
| Yes, touch button|
|
Cable|
|
|
|
|
|
Length|
|
| 22 cm|
|
Type|
|
| 2 single strand cables : black and red|
|
Section|
|
| 2 x 0,33mm²|
|
Operating temperature|
|
| -20°C / +80°C|
|
Protection rate|
|
| IP67|
|
Warranty|
|
| 2 years|
|
DECLARATION OF CONFORMITY
UNITECK testifies that the LED lights described in this manual are manufactured in compliance with the EMC (electromagnetic compatibility standard) European directive and the 10.05 regulation (E-mark R10 05).
They comply to the harmonized standards:
- EN 55015 : 2013
- EN 61547 : 2009
- EN 61000-3-3 : 2006 + A1: 2009 + A2 : 2009
- EN 61000-3-3 : 2013
CE date of tagging: may 2022.
UNITECK
1 Avenue de Rome
Immeuble cassis
ZAE via Europa
34500 Vendres
FRANCE
WARRANTY
Warranty covers any defect, manufacturing defects for 2 years from the date of its purchase (parts and labour).
Warranty does not cover:
- normal wear of parts (Ex.: cables, etc.).
- panel-module/battery voltage errors, incidents due to inappropriate use, fall, disassembly or any damages due to transport.
In case of failure, return the product to your distributor by attaching:
- the dated proof of purchase (receipt, bill…)
- explanatory note of the failure
Caution: Our after-sales service does not accept carriage forward/
collected returns.
After the warranty, our after-sales service ensures repairs after acceptance
of a quotation.
Customer Support
After-sales service contact:
UNITECK
1 Avenue de Rome
Zae Via Europa – Immeuble le Cassis
34350 Vendres -France
E-mail : sav@uniteck.fr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>