FoMaKo FMK30SDI Black Cameras By Remote Control Instruction Manual
- June 14, 2024
- FoMaKo
Table of Contents
**FoMaKo FMK30SDI Black Cameras By Remote Control Instruction Manual
**
How to Control More Than One Cameras By Remote Control
The remote control can control max 4 cameras.
Let’s control 4 cameras for example.
-
Please check user manual page 18:
【】+【＃】+【F1】:Camera Address No.1
【】+【＃】+【F2】: Camera Address No. 2
【】+【＃】+【F3】: Camera Address No. 3
【】+【＃】+【F4】: Camera Address No. 4
Camera Remote Control Address Setting
-
Please check user manual page 17:
you need press the camera’s address ID, before to control the camera.
**Camera Selection
** Select the camera address to control.
-
Prepare 4 cameras. all cameras’ default address ID is “1”, so, we have to change the camera’s address ID to 2, 3, 4.
-
Camera 1, don’t change anything, this camera’s address ID is “1”;
-
Power on Camera 2, and set camera address ID to “2”.
Press button【*】+【＃】+【F2】one by one, now, this camera’s address ID set to
“2”,before to control Camera 2, you need to call camera 2’s address ID by press “CAMERA SELECT” number “2”.
Now you can control camera 2 , when you control camera 2, Number “2”in “CAMERA SELECT” will red-flash -
Power off camera 2 and power on camera 3, set camera 3’s address ID to “3”
Press button【*】+【＃】+【F3】one by one, now, this camera’s address ID set to “3”,before to control Camera 3, you need to call camera 3’s address ID by press “CAMERA SELECT” number “3”. Now you can control camera 3 , when you control camera 3, Number “3”in “CAMERA SELECT” will red-flash
-
Power off camera 3 and power on camera 4, set camera 4’s address ID to “4”
Press button【*】+【＃】+【F4】one by one, now, this camera’s address ID set to “4”,before to control Camera 4, you need to call camera 4’s address ID by press “CAMERA SELECT” number “4”. Now you can control camera 4 , when you control camera 4, Number “4”in “CAMERA SELECT” will red-flash -
Power on Camera 1, Camera 2 , Camera 3 and Camera 4
Now, you can control 4 cameras by one remote control .
If you want to control camera 1, press number “1” in “CAMERA SELECT”;
If you want to control camera 2, press number “2” in “CAMERA SELECT”;
If you want to control camera 3, press number “3” in “CAMERA SELECT”;
If you want to control camera 3, press number “4” in “CAMERA SELECT”.