FoMaKo KC608 Pro PTZ Camera Controller User Manual

FoMaKo KC608 Pro PTZ Camera Controller User Manual

(KC608 Pro & KC608N)

E-mail: ivan@fomako.net
Website: www.fomako.net
Phone: 0086-18565635753
Address: 10F NiuLanQian Building,Minzhi,
longhua, shenzhen, China, 518000
Please feel free to contact us if you have any questions.

Please Note: Both controller and camera have NDI function, then, they can use NDI control protocol.

Add Controller/ Cameras to Your Network
Please do the connections as the following. You’d better have a router in your network, then router will assign IP addresses for the controller and cameras automatic. If you don’t have router in your network, controller & cameras can’t get IP address from your network.

About cameras and controller’s IP address
The first three parts of IP address must be the same for controller and cameras.

For example:
192.168.1.100 and 192.168.1.150 , the first three parts are the same. You can add the camera to controller.
192.168.1.100 and 192.168.12.110, the first three parts are not the same.You can’t add the camera to the controller.
You have to change camera or controller’s ip address , to make the first three parts become the same.

FoMaKo cameras and controller are optimized, normally, you don’t need change ip address for them.

Add Cameras to Controller
Method one: By controller’s search function
Please note: Some brands cameras don’t support search function.

Let’s use FoMaKo camera for example.
(1) Press “search” button on controller, it will show cameras’ ip address on screen;
(2) Press “Enter” -> “Add to Shortcut Keys” , you can assign the cameras to CAM1~CAM7 shortcut keys,

For example, you assigned the first camera to CAM 1, press “CAM 1” button, now ,you can control the first camera.
(3) Add cameras one by one, you can assign 7 cameras to 7 shortcut keys. Method Two: by camera’s IP address
(1) Press “Setting” -> Device Management ->Add a new Device: input the camera’s IP address, Protocol: VISCA Over IP, Save
(2) Go to Settings -> Hot Key -> CAM 1-> Select from List->choose the camera’s ip address you just added->Press “enter” button to confirm ->Back.
Now, you add CAM 1 to controller successfully

Set and Call Preset Position
Press “STORE” button, the button will light up, then you can save preset position by numbers;
Press “CALL” button, the button will light up, then you can call preset position by numbers.

Screen Preview Function
”PVW” button control the camera’s video preview on the screen. But you need do the settings before using it.
PVW function uses camera’s RTSP streaming function. So, you need know your camera’s RTSP streaming URL.
Let’s use FoMaKo camera for example:
FoMaKo camera’s RTSP streaming URL is :
Main streaming: rtsp://192.168.1.100:554/live/av0
Second Streaming: rtsp://192.168.1.100:554/live/av1
Please change ip address 192.168.1.100 to your camera’s ip address.
Normally, we use second streaming for PVW function.
Settings on Controller:
(1) Long press the camera’s shortcut key, such as “CAM 1” , go to CAM 1’s settings -> Stream URL
(2) Input camera’s RTSP streaming URL: rtsp://192.168.1.100:554/live/av1 ,
(3) Press “enter to save”
(4) Press “PVW” button, now, the camera’s preview video will shown on screen
(5) Press “PVW” button again, it will close the preview video.

Tips:
(1) When go the the controller’s settings, you can use the “Focus” button to choose the settings. The operation will be much more faster.

(2) Save more than 10 position presets: Settings-> Keys->Preset Operation Mode ->255
If you need more supports, please contact us at: ivan@fomako.net, normally, we can reply you within 12hours

Tips

Thank you for using our products.
In order to enable you to operate this machine proficiently as soon as possible, please carefully read the instruction manual we provide for you, from which you can obtain product safety precautions, product introduction and product usage methods and other related knowledge.
After you have read the instruction manual, please keep it properly for future reference.
If you find any problems during the use of the product, please contact our relevant service personnel, thank you for your cooperation.

Precautions

1. Before connecting to the device, make sure the power supply voltage is correct. Only use the original uncut (unsliced) power supply that came with your keyboard.
2. If the product does not work properly, please contact your dealer. Never attempt to disassemble the device your self.(We are not responsible for problems caused by unauthorized repair or maintenance.)
3. This product is an indoor device, please do not place this product in a place with water or humidity.
4. When transporting, the equipment should be packed in the original packaging.
5. Do not drop or subject the unit to physical impact.
6. Do not use strong detergent to clean the machine, when the dust is thick, wipe gently with a neutral detergent, and only for external cleaning.
7. Keep RJ-45 ports free of dust and moisture.
8. Avoid moving the machine between places that are too cold or too hot to avoid fogging inside the machine and affect its service life.

Affirm

1. We have done our best to complete and correct the content of this manual, but there will inevitably be errors and omissions, and we will not be responsible for any technical or printing errors in this manual.
2. The appearance of the product shown in this manual is for reference only, and may differ from the actual appearance of the device you purchased.
3. This instruction manual guides multiple product models, so it is not intended to be used alone for any specific product.
4. The display interfaces in this manual, illustrations, parameters, drawings and model value ranges may be different. Please refer to the actual product for details.
5. The content of this manual is subject to change without prior notice.
6. If there is a discrepancy with this manual due to software version upgrades, please refer to the software as the standard.

Feature

• 4D precise Joystick+3D knobs ergonomic zoom button:
  Camera parameters control such as white balance, exposure, focus and zoom etc.

• Built-in 3-inch LCD screen:
  Support real-time PVW of current camera viewing through up streaming (NDI HX2 and RTSP only).

• Support 7 cameras selection shortcuts:
  7 camera shortcuts can be set quickly according to requirements; Up to 1000 cameras information can be saved.

• Newly upgraded UI operation interface:
  Display main parameters of cameras directly, personalize stylish interface casually.

• Remote control of PTZ camera menu:
  Open camera’s menu quickly and combine PVW screen or image screen to control.

• This function is recommended to be used with our camera.

  • White and red backlight silicone buttons:
    High-quality silicone, excellent touch, support white and red backlight so it can be operated smoothly in a low-light environment; support letters and common characters input and other operations such as editing camera’s name and address.

  • Support buttons lock via one click:
    Lock buttons via one click to avoid misoperation.

  • Multiple control protocols, apply to abundant venues:
    Support VISCA、VISCA Over IP、VISCA TCP、PELCO P/D On vif and NDI, support automatic protocol recognition.
    *Additional licenses are required to upgrade the NDI function, please consult the manufacturer for details.

  • Abundant interfaces, multiple connection methods:
    External RS-232, RS422/485 serial port and RJ45 network interface. The network interface supports
    POE function, thereby reducing wiring trouble.

  • External tally interface:
    Support up to 8 tally channels.

  • Support customizable buttons:
    Support customizable buttons F1, F2, can set the best operation function according to requirement.

Product diagram

The Front board:

Button Function:

1. White balance adjustment
   “WB MODE” white balance mode selection
   “ONE PUSH” trigger, white balance is triggered when the controller is in “ONE PUSH” mode. “R/B
   GAIN”white balance adjustment

2. Exposure adjustment
   “EXPOSURE MODE” exposure mode selection
   “BACKLIGHT” turn on/off backlight
   “I/S/G”exposure adjustment

3. “LOCK”, lock keyboard

4. “SEARCH”for searching IP device; support VISCA OVER IP / ONVIF protocol search

5. “CAM LIST”, IP devicelist

6. “CAM1~CAM7”, shortcut buttons to select cameras

7. “CAM MENU” , camera menu, turn on/off

8. “SETTING”, control keyboard settings

9. “BACK”, back button

10. Optical zoom adjustment
    “PT/Z SPEED”, knob to adjust the zoom speed level (1~7)
    “ZOOM” TELE WIDE, control camera’s optical zoom

11. Focus adjustment
    “NEAR”, manual focus mode, near focus
    “FAR”, manual focus mode, far focus “AUTO”, auto focus mode

12. “F1~F2”, customizable buttons

13. “PVW”, preview current-controlled device, IP video streaming

14. Preset operation area: characters, number keyboard

15. HOME: confirmation button (VISCA)

16. PTZ joystick
    The left and right direction of the joystick is panning, and the up and down is tilting. When you release the joystick, the camera will stop moving.
    Turn the knob on the joystick clockwise, ZOOM TELE; Turn the knob on the joystick anticlockwise, ZOOM WIDE.

Screen:

1. Tally interface;

2. RS-422/485 interface;
   Connect with RS-422 cable, up to 7 cameras can be controlled through VISCA protocol; Connect with RS-485 cable, up to 7 cameras can be controlled through VISCA protocol and up to 255 cameras through PELCO protocol.

3. RS-232 interface;
   Connect with RS-232 cable, up to 7pcs cameras can be controlled through VISCA and and up to 255pcs cameras through PELCO protocol.

4. USB interface (reserved interface, no function);

5. LAN port, connect the controller with network (up to 1000 network cameras can be saved);

6. DC-12V power input interface;

7. Power on/off.

Interface pin definition

Power supply

Supply controller ’spower by the following methods1.DC power adapter power supply (standard 12V)
2.POE power supply (connect the Ethernet IP port to the POE switch) Use
CAT6 cable, the maximum distance is 100 meters (802.3af)

IP connection

Connect “LAN” port of the controller to port on the Ethernet switch

Serial connection

1. Connect DB9 to RS232 8 pin mini port control cable for RS-232 connection RS232 interface picture

2. Phoenix head for RS-422 connection

3. Phoenix head for RS-485 connection

Keyboard OSD menu settings

• Press the “SETTING” button to open / exit the keyboard menu Use the joystick to operate the keyboard menu
  a. Move the joystick cursor up and down
  b. Move the joystick to the right to enter the next menu / switch parameters
  c. Move the joystick to the left to return to the previous menu / switch parameters
  d. “HOME” button on the top of the joystick to enter the next menu / save and exit Use the “FOCUS” knob to operate the keyboard menu
  a. Rotate the cursor clockwise down
  b. Rotate the cursor counterclockwise up
  c. Click the “FOCUS” knob to enter the next menu / save and exit
  Click the “BACK” “AUTO” to return to the previous menu / exit without saving

Keyboard input

Each button with number and letter or symbol input, select the character you want to input by clicking the button continuously
Adjust the cursor position by rotating the joystick left or right or the “FOCUS” knob Case switching:

a. Click the button “1” twice continuously to switch to uppercase English
b. Click the button “1” three times continuously to switch to lowercase English
“DELETE” : delete a single character
“ENTER”, “HOME” : save and exit “BACK”,
“AUTO”: do not save and exit

Menu introduction

Main menu list

Hot Key: It is used to set the device information of CAM1~CAM7 shortcut keys;
Device Management :Used to manage the keyboard neglect device and added device information;
Protocol Settings：Authorization and information management for the corresponding protocol of the controller;
Network:Used to manage network setting;
Keys: Used to set up the custom functions of the buttons
F1 and F2,and the preset operation mode; Display: Used for setting up the display of controller;
Beep:Beep happens when operate the buttons; Joystick: Set up joystick related functions;
Tally: The controller is used to send and receive tally signals;

Language:Set the keyboard display language;
About Device:Display equipment information (the following information is given by the manufacturer and
cannot be modified without permission. If you have any questions, please contact the manufacturer);
Reset Device:Restore to factory default setting state

1. Hot Key

Device Name: Modify the device name which is displayed on the home page;
Protocol: Select a protocol based on your needs, “VISCA”, “PELCO D”, “PELCO P”, “VISCA Over IP”, “VISCA TCP” can be manually input, “ONVIF” and “NDI” cannot be manually selected, needs to be selected from the device list;
Address: match the camera address;
Baudrate: match the camera baud rate;
RS-485: When using the RS-485 connection mode to connect to the camera, turn on this option to obtain the device information status;
Compatible mode: When it has problem to use the standard mode to work with the camera, pls try to use other modes;
Video stream: A protocol that supports video streaming over a network;
Stream URL: Enter the camera stream address to pull the video signal of the camera; Reset
Camera address: When cascading multiple cameras and using the VISCA protocol, this function can assign corresponding addresses to the cameras according to the connection sequence ( only valid under the VISCA protocol );
Select from list: You can select a device from the “device list” for quick control.

2. Device Management

Device list: You can delete the device that has been added to the keyboard or modify the device information that has been added to the keyboard;
Add a new device: Manually add devices to the keyboard;
Ignored device list: block specified devices in the search list;
Add an ignored device: Manually add devices that need to be blocked in the search list.

Camera assignment

Add IP camera to keyboard

1. Search the local network and add the IP camera to the keyboard;
Press “SEARCH” button to search IP camera;
The keyboard screen displays “Searching for devices, please wait”;
Display the discovered ONVIF / VISCA_IP cameras, use the joystick or “FOCUS” knob to browse the discovered cameras;
(For discovered cameras, camera parameters can be modified, added to the camera list, and added to the ignore list);
Edit discovered cameras and add cameras to the camera list (device that has been added to the camera list will no longer be displayed in the search list);
Exit the search list;
Press the “CAME LIST” button to open the camera list, use the joystick or the “FOCUS” knob to select the corresponding camera.

2. Manually add VISCA_IP, VISCA_TCP cameras to the keyboard:
Click “SETTING” to open the keyboard menu, select the “Device List” column, select the “Add Device”column, modify the corresponding camera parameters and click “Save”(when the IP address needs to fill in an odd number, add 00 before the odd number, such as 005);
Exit keyboard menu;
Short press the “CAM LIST” button to open the camera list, use the joystick to select the added custom camera (IP control).

3. Edit camera list
Click “SETTING” to enter the menu, select “Device Management” column, select “Device List”
It can edit the devices added to the camera list from the “search list” and “add list”; (You can edit camera name, protocol (ONVIF and NDI device list does not allow manual selection), IP address, compatibility mode, video stream address, delete device, ONVIF device settings can also edit user name and password)

Edit shortcut

Interact with the camera

Click “CAM LIST” to open the device list, and then select the device through the joystick or “FOCUS” knob;
Press the shortcut key “CAM1~CAM7” to select camera to be controlled;
(When it’s VISCA protocol, there are multiple cameras, in protocol for VISCA shortcut editing, click “Reset Camera Address” to assign the address).

Camera menu control

1. Set camera OSD menu
Press the “CAM MENU” button to send a command to open the camera OSD menu; Use the joystick to navigate the menu;
a. Move the joystick up and down to browse the menu options;
b.Move left and right to adjust the value;
c.Press the top button of the joystick to send the “ENTER” command.

2. Manual movement
– Horizontal, vertical and zoom can be executed simultaneously;
– Joystick can be used to move horizontally and vertically in any direction;
– The joystick can quickly return the gimbal and lens to the initial position through the top button;
– PTZ Speed: “+, -” knob can adjust the rocker switch (“ZOOM” TELE WIDE) to control the zoom speed of the camera;
– Rotate the rocker to adjust Zoom In/Out.

4. Adjust imageparameters
Use the image adjustment panel to set or adjust image parameters (only applicable to VISCA and VISCA_IP protocols, PELCO /ONVIF/NDI protocol image adjustment function isincomplete); Backlight compensation
Turn on/off the camera’s backlight compensation via the “BACK LIGHT” button;

Exposure
The exposure mode can be switched through the “EXPOSURE MODE” button; Adjust the parameter value in each mode by rotating the “I/S/G +/-” knob; Parameter switching in the same mode, click the “I/S/G +/-” knob to switch (aperture, shutter, gain);

White balance
Switch the white balance mode by using the “WB MODE” button;
By clicking the “R/B GAIN +/-” knob, switch the red/blue gain value parameter adjustment;

Focus
Manually adjust the focus (near/far) through the FOCUS knob “NERA/FAR” knob; Automatic adjustment by using the AUTO button.

NDI protocol control

Connect the camera and keyboard in the same LAN;
Press “CAM LIST” to open the camera list, use the joystick or the “FOCUS” knob to select the corresponding NDI protocol camera (for cameras that support NDI protocol, the IP will be automatically added to the camera list when the network is connected, no need to search and add);
(Visca Over IP, Onvif protocols need to search for devices first and then manually add IP to the camera list.)

Specifications

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>