FoMaKo FMK20UH CoIor Video Conference Camera User Manual

FoMaKo FMK20UH CoIor Video Conference Camera

E-mail : [email protected]
Website : www.fomako.net
Phone : 0086-18565635753
Address : 10F NiuLanQian Building, Minzhi, longhua, shenzhen, China, 518000

Please feel free to contact us if you have any questions

Preface

• Thank you very much for using our color video conference camera. Please read this manual in detail and use it accordingly.
• This manual introduces the function of a video camera, opening and operation principles in detail.
• This color video camera is high-quality and flexible with a remote pan355 ° /til t 120 ° operation and image flip , and a DSP dealing integration module input. Support VISCA and PELCO P/D protocol.
• Allowing installation on the ceiling /desk and accurate remote control of RS232/ 485.

In order to avoid the camera and other connecting equipment being damaged and lead to potential danger,

Safety Requirement

Please follow the rules as below:

• Only professional technicians can install and maintain;
• Prohibit setting on the places which raining or damp, using unit under stated temperature, humidity and power;
• Using accessories from the original factory or allowed;
• Once an exchange product or repair happen please use a universal meter test before using;
• Please use soft and dry rag for cleaning, no strongly corrosive cleanser for avoiding mangled for outside of camera or lens;
• Take care using and no squeeze crust avoiding camera broken;
• The bracket must endure 3 times the weight of the camera at least.

FEATURE

1. 1080p full HD PTZ camera “Pan 355 ° , Tilt 120 °
2. Wi th the latest developed digital signal processor (DSP) improves the image quality of digital zoom
3. Mul ti function IR remote controller can control PTZ, Lens, and other functions conveniently.
4. Using a PC to control the camera with Sony VISCA or Pelco command
5. IR remote controller, RS422C, RS232C and other control method
6. 9 preset positions by remote controller, 200 preset positions by PC or remote control unit, memory auto saved when power off
7. The maximum speed of horizontal rotation:80 ° /s, Tilt:60 ° /s
8. Providing multifunctional accurate remote control

PACKING LIST

Please check all devices inside while opening the package.

• Video camera—————-1
• Power adapter—————1
• Rs232 cable—————–1
• Remote controller———–1
• HDMI wire——————-1
• Ceiling bracket————-1

Parts and Introduction

1. Lens
2. Sensor for the Remote Control
3. Power lamp
4. Standby lamp
5. HDMI Video output
6. USB Video output
7. IR select switch
8. RS485
9. RS-232/422
10. DC IN 12V input

Remote Controller

1. CAMERA SELECT: (match to IR SELECT back)
2. FOCUS: (auto or manual)
3. MENU
4. BACKLIGHT
5. POWER
6. STD, REV: (Press L/R DIRECTION SET, and then Press 1 or 2)
7. POSITION, (Number area: PRESET: press PRESET then press 1~ for set up preset position)
8. RESET: (Press RESET and then press-9 for eliminate the preset position)
9. ZOOM: (Telephoto or Wide Angle)
10. PAN-TILT RESET
11. PAN- TILT ; HOME for return middle position
12. L/R DIRECTION SET
13. IR transmit
14. CLOSE THE MENU
15. S-OUT: SWITCH TO 720P50
16. DATA-SCREEN: Switching color mode
17. Brightness adjustment: bright-/ bright+

Maintenance Description

Remote Commander Operation

Pan/Ti 1 t control

1. Power on, Pan/Tilt will be in the initial position.
2. Press the arrow to adjust the direction, when you can watch the video on the screen, you can move the direction by pressing the arrow step by step or continuously for the wild turning direction. If you want to fix the direction, please press the arrow (up or down) and the arrow (left or right) at the same time.
3. Press HOME for the front direction.
4. Press PAN-TILT RESET or turn off the power and then turn on if the direction is not what you want, the direction will be changed to the initial position
5. Press L/R DIRECTION SET and STD or REV at the same time, meanwhile, move the right arrow, and you can turn the direction to left or right.

ATTENTION:
When you use more than one commander, please repeat operation accordingly

Adjust Camera FOCUS

• Press AUTO for focus auto
• Press MANUAL and then adjust far or near by switch FAR OR NEAR

ATTENTION:
In the condition of far focus, it is natural for the image Twitter slowly when operating pan/tilt.

ZOOM
Adjust T and W for zoom far or near

One Remote controller for operating a few cameras

1. Maximum 3 cameras can be controlled by a remote controller through back switches 1, 2,3.
2. Press CAMERA SELECT I or 2 or 3, and you can control each of the matching 1, 2, 3 cameras, 1 or 2 or 3 buttons will be lighted

Use back light compensation

If there is lighting on the back of focusing object, the object will be looks black. So you can press BACK LIGHT for avoiding this happening, and turn off butt on for close.

Preset Position Operation

• Store camera set tings-presets
• Up to 200 presets can be set (location, zoom, focus, and the background light)
• By remote controller only can set and calling 9 preset posit ions.
• Through a user-defined protocol Over 200 presets that can be set

1. Recognizes that the STANDBY led is not blinking. If the STANDBY indicator is flashing, press PAN-TILT RESET to restored
2. Adjust the camera position, zoom, focus, and the background light.
3. Press and hold the PRESET button, then press one of the POSITIONl-9.

Use preset position
Press any switch of 1-9 position

Cancel preset position
Press RESET, then press 1-9 simultaneously

Attention
If a POSITION is storing or deleting a new se1 can not be called in the channel, set or unsell

MENU

• Communication
  This option can set protocol, address, baud rate, speed scale, speed limit when the camera is communicating through serial port.

• PTZ settings
  This option can set PTZ related functions, including digital zoom, focus mode, remote speed, pan direction, tilt direction, filp and mirror.

• Exposure settings
  This option can set exposure mode including full auto exposure, manual exposure, shutter priority, iris priority, bright priority, etc.

• White balance settings
  This option can set white balance mode including auto, manual, indoor, outdoor, one push, ATW, etc

• Picture Settings
  This option allows you to set image effects, including 2D/3D noise reduction, contrast, chroma, acutance, gamma, wide dynamic range, defog, anti flicker, etc.

• System setting
  This option can set camera resolution, reload preset 1, RS485 search function, language, check current version and back to factory setting

Communication

Communication Sub menu

• Protocol: can set auto/visca/pelco-p/pelco-d
• Address: can set camera serial communication address
• Baud rate : can set serial communication baud rate, 2400/4800/9600/19200/38400/115200
• Speed scale : can set speed range of PTZ (only take effect when using serial communication), standard/expand
• Speed limit : can set on/off of pan tilt speed and lens magnification linkage

PTZ settings

• PTZ settings Sub menu
• DZoom: on/off
• Focus mode: auto/manual
• Remote speed: PTZ speed 1-16 (only take effect when using IR remote controller)
• Pan direction : can set pan direction normal/reverse
• Tilt direction : can set pan direction normal/reverse
• Flip: can set image flip
• Mirror: can set image mirroring

Exposure settings

Exposure settings Sub menu

• Full auto : exposure compensation can be adjustable in auto mode, 0-15
• Backlight can be adjustable in auto mode, open/off
• Irispri: iris value can be adjustable in iris priority mode,
• Close-1/1. 8 exposure compensation can be adjustable in auto mode, 0-15
• Backlight can be adjustable in auto mode, open/off
• Shutter pri : shutter value can be adjustable in shutter priority mode, 1/1-1/l0K exposure compensation can be adjustable in auto mode, 0-15
• Backlight can be adjustable in auto mode, open/off
• Bright pri : bright value can be adjustable in bright priority mode, 0-27
• Manual: exposure compensation can be adjustable in manual mode, 0-15 iris value can be adjustable in manual mode, Close-1/1. 8 shutter value can be adjustable i n manual mode, 1/1-1/l0K

White balance settings

• White balance settings Sub menu
• White balance mode : auto, manual, indoor, outdoor, one push,ATW
• Manual mode : red gain is adjust able, 0- 255 blue gain is adjustable , 0-255

Picture Settings

Picture Settings Sub menu

• 2DNR : 2D noise reduction, open/off
• 3DNR : 3D noise reduction, off/1-5
• Contrast : can set image contrast, 0-15
• Chroma : can set image color saturation, 0-15
• Acutance : can set image sharpness value, 0-15
• Gamma : can set image gamma, 0-4
• WDR : can set wide dynamic range, off/1-6
• Defog : can set defog level, off/1-15
• Flicker : anti-flicker frequency, off/50hz/60hz

System setting

• System setting Sub menu Resolution: can set 1080p50/60/59.94, 1080i60/59. 94/50, 1080p30/29. 97/25, 720p60/50

• Reload preset 1 : on/off, if preset position 1 is set for the camera, can set to call the preset position 1 function automatically after powering on,

• Language: can set menu language, simplified Chinese/traditional Chinese/English
  Version : current version of the camera, can be used by a manufacturer to confirm the version information, without special functions

• Factory reset : Reset system, restore only parameter values except for image and network parameters to factory default values Reset picture, restore image parameter value to the factory default value Reset all, restore all parameter values to factory defaults

Technical parameter

FAQ Handling

• Display shows no image
  • Check if the power supply is connected, if the voltage is normal, if the power indicator light on Repower on the camera to see if it can do self- check normally.
  • Check if the cables between camera and terminal equipment are correct.
• Sometimes there is no image
  • Check if the cables between camera and terminal equipment are correct.
  • The camera can not be controlled by the remote controller
• Replace a new battery
  • Check if the camera is under normal working mode
  • Check if the IR select of the remote controller match the camera
• The serial port can not be controlled
  • Check if the camera protocol, address, and baud rate are the same
  • Check if the control cable is connected normally
  • Check if the control driver is installed successfully when controlling by USB

References

• FoMaKo PTZ Camera - Supplier and manufacturers of 4K NDI HDMI PTZ Camera for professional Live Streaming and live production industrial use. Accept OEM/ODM orders. Distributor, Agent Wanted. Contact us Today!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>