ARDESTO FNT-R36X1WY22 Tower Fan Instruction Manual

Tower Fan
Instruction Manual

220-240B~ 50-60Γ⊔, 5OB T/ 220-240V~ 50-60Hz 50W
It is important that you read these instructions before using your product and we strongly recommend that you keep them in a safe place for future reference.
This appliance can be used by children over the age of 8 and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they are under constant supervision or instructed in the safe use of the appliance and understand the possible dangers. Children should not play with the appliance. Cleaning and customer service should not be performed by children without supervision.
WARNINGS

1. Use as per the rating voltage.
2. Do not repair or remake the appliance by yourself, it should be repaired by the repairmen.
3. Do not operate the appliance with wet hands, in order to avoid damage.
4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
5. When the appliance is not in use, switch it off and unplug it.
6. Do not insert things into air outlets and inlets, in order to avoid damage.
7. Do not use the appliance near explosive and combustible gas.
8. Use the appliance only on a flat surface.
9. Do not use outdoors.
10. Do not turn over the appliance. Unplug the power supply If it is toppled over and there have some water in the body. Dry the body before use.
11. Clean the appearance with a lightly damp cloth. It can clean with neutral detergents. Do not rinse with water.
12. Do not make air outlets and inlets near the wall or curtain.
13. Do not knock or shake the body when used, otherwise, it may cause stop.
14. The appliance must not be located immediately below a socket outlet. The rating current of the socket should exceed 10A.
15. Do not use the appliance in the immediate surrounding of a bath, a show, or a swimming pool.
16. Children should be supervised to ensure that they do not play with the appliance.

EQUIPMENT
Fan – 1 pc
Fixing nut — 1 pc
Base – 1 pc
Remote control – 1 pc
User manual (warranty card is included) – 1 pc

ASSEMBLING

Step 1: Take the two parts of the base out of the packing box, align the two holes in the base, and connect. Well assembled into a base. (Figure 1)
Step 2: Remove the base nut from the fan. (Figure 2)
Step 3: Place the power cord in the assembled base slot, align the bottom of the fan with the center hole of the base and three screw head avoidance holes, and install the base in the correct direction on the body.
Finally, tighten the nut. (Figure 3)
Note: When installing the base, place the fan upside down on the packaging foam or other soft surfaces to avoid scratching.

FUNCTIONS & OPERATION

CONTROL PANEL

Plug in first
Put the plug into the socket, products in standby, power indicating light is on.
ON/OFF button: Push the “ON/OFF” button to the work state, and push it again to standby.
SPEED button: Push the “SPEED” button to set from HIGH-MIDDLE-LOW fan speed.
WIND button (airflow mode setting button): Push the “WIND” button to set from «Normal wind» – «Natural wind» – «Sleeping wind».
OSCILLATION button: Push the “OSC” button to oscillate the fan, and push it again to stop the function.
TIMER button: Push the “TIMER” button from 00-15 hours. After 60 seconds automatically turn off the screen.
REMOTE CONTROL

Same as control panel
The remote control uses one button cell, model No. CR2025 (3V). We recommend the use of a Lithium type battery for longer use.

Note: Please follow battery disposal instructions on battery packaging, or contact your local councils for safe disposal of batteries.

CLEANING AND MAINTENANCE

Clean with neutral detergent and a soft cloth.
Attention: unplug the power plug when cleaning the appliance, since there is high pressure in the body. Do not leave any water on the control panel.
DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT
To protect our environment and to recycle the raw materials used as completely as possible, the consumer is asked to return unserviceable equipment to the public collection system for electrical and electronic. The symbol of the cross indicates that this product must be returned to the collection point for electronic waste to feed it by recycling the best possible raw material recycling.
ADDITIONAL INFORMATION FOR MODELS: FNT-R36X1WY22, FNT-R44X1WY22

EN 60704-1:2010+A11:2012 & EN 60704-2-7:1998
EN 50564:2011

Contact details for obtaining more information

| FC «LOGIN», Marka Vovchka st., bldg. 18-A, Kyiv city, 04073, Ukraine.
Brand official website:  ardesto.com.ua

Warranty conditions:

The plant guarantees the normal operation of the product within 12 months from the date of the sale, provided that the consumer complies with the rules of operation and care provided by this Manual.
The service life of the product is 5 years. In order to avoid any misunderstanding, we kindly ask you to carefully study the Owner’s Manual, and the terms of the warranty, and check the correctness of filling the Warranty Card. The Warranty Card is valid only if the following information is correctly and clearly stated: model, serial number of the product, date of sale, clear seals of the company-seller, and signature of the buyer. The model and a serial number of the product must correspond to those specified in the Warranty Card. If these terms are violated, and if the information specified in the Warranty Card is changed, erased, or rewritten, the Warranty Card is considered invalid. Setup and installation (assembly, connection, etc.) of the appliance are described in the attached documentation; they can be carried out both by the user and by specialists having the necessary qualification sent by USC or selling companies (on a paid basis). In this case, the person (the institution) installing the appliance shall be responsible for the correctness and quality of installation (setup). Please pay attention to the importance of the correct installation of the appliance, both for its reliable operation and for obtaining a warranty and free service. Require the installation specialist to enter all the necessary information about the installation in the Warranty Card.
In case of failure of the appliance during the warranty period by the fault of the manufacturer, the owner is entitled to free warranty repair upon presentation of the correctly filled Warranty Card together with the appliance in the factory configuration packed in the original packaging to the warranty workshop or the place of its purchase. Satisfaction of the customer’s claim due to the fault of the manufacturer shall be made in accordance with the law 00n Protection of Consumers’ Rights». In the case of warranty repair, the warranty period shall be extended for the period of repair and shipment.
WARRANTY CARD
Dear Buyer! Congratulations on your purchase of the ARDESTO brand appliance, which was designed and manufactured in accordance with the highest quality standards, and we thank you for choosing this particular instrument.
We ask you to keep the coupon during the warranty period. When purchasing a product, require a full warranty card.

1. Warranty service is carried out only if there is a correctly and clearly filled original warranty card, which indicates: the product model, date of sale, serial number, warranty service period, and the seller’s seal. *

2. The service life of household appliances is 5 years.

3. The product is intended for consumer use. When using the product in commercial activities, the seller/manufacturer does not bear warranty obligations, after-sales service is performed on a paid basis.

4. Warranty repair is carried out within the period specified in the warranty card for the product in an authorized service center on the conditions and terms determined by applicable law.

5. The product is withdrawn from the warranty in case of violation by the consumer of the operating rules set forth in the instruction manual.

6. The product is removed from warranty service in the following cases:
   • misuse and non-consumer use;
   • mechanical damage;
   • damage caused by the ingress of foreign objects, substances, liquids, or insects;
   • damage caused by natural disasters (rain, wind, lightning, etc.), fire, domestic factors (excessive humidity, dust, aggressive environment, etc.)
   • damage caused by non-compliance of power and cable network parameters with state standards and other similar factors;
   • when operating equipment in the power supply network with a missing single ground loop;
   • in case of violation of seals installed on the product;
   • lack of a serial number of the device, or inability to identify it.

7. The warranty does not cover consumables and accessories, as well as filters, shelves, drawers, stands, and other containers for storing products.

8. The warranty period is 12 months from the date of sale.

• Tear-off maintenance tickets are provided by an authorized service center.

The completeness of the product is checked. I have read the terms of the warranty service, no complaints.
Customer Signature…………………………….
Elit service:
3 Petre Kavtaradze str Tbilisi
94 gorgiladze street Batumi
71 davit guramishvili street Gori
73 kostava str Akhaltsikhe

Warranty card
Product information…………..
Product,…………………………….
Model………………………………..
Serial number,…………………..
Seller Information……………
Trade organization name…
The address…………………….
Date of sale,…………………..
Seller stamp……………………
Coupon
Seller stamp
Date of the application………
Cause of damage……………….
Date of completion…………..
Coupon
Seller stamp
Date of the application………
Cause of damage………………
Date of completion………….
Coupon
Seller stamp,
Date of the application……..
Cause of damage………………
Date of completion………….

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>