logitech 54660 Crayon Digital Pencil for iPad User Guide

: June 14, 2024
: Logitech

logitech 54660 Crayon Digital Pencil for iPad

logitech-54660-Crayon-Digital-Pencil-for-iPad-FIG-1

PRODUCT INFORMATION

Specifications

Compatible Devices: iPad Pro 12.9-inch (3rd gen), iPad Pro 11-inch, iPad Air (3rd gen), iPad mini (5th gen), iPad (6th gen)
Charging Time: Approximately 30 minutes
Battery Life: Varies depending on usage
LED Indicators: Fade in green, fade out green, solid green, breathing green, blinking red, red when user presses button, green when user presses button, yellow

Product Setup
To start using Logitech Crayon, simply turn it on and start drawing. No software downloads or pairing is required. Follow these steps to get started:

Make sure you are using one of the compatible devices mentioned above.
Flip open the cap of Logitech Crayon.
Insert the lightning cable into the Lightning port of Logitech Crayon.
Connect the other end of the cable to a power adapter or computer to charge.

Software Updates

Updating the iOS on your iPad may affect your experience with Crayon. If you notice changes in functionality, follow these steps:

Download the Logitech Crayon software update from https://support.logitech.com/product/crayon-ipad/downloads.
Connect Logitech Crayon to a laptop via the lightning cable.
Follow the prompts to update the software.
To receive notifications about software updates, product tips, and more, visit https://support.logitech.com/product/crayon-ipad/register.

Product Usage

Logitech Crayon can be used with hundreds of Apple Pencil compatible apps, which are downloadable from the App Store. Unlike Apple Pencil, Logitech Crayon is not pressure sensitive, so there is no need to press down hard on the iPad. Simply tilt Logitech Crayon for thicker or thinner lines.

How to Charge

Flip open the cap of Logitech Crayon.
Insert the lightning cable into the Lightning port of Logitech Crayon.
Connect the other end of the cable to a power adapter or computer to charge.
It takes about 30 minutes to charge Logitech Crayon from 0 to 100%. Note that Logitech Crayon will not work while charging.

Know Your Product

Logitech Crayon has several components:

Tip cover
Pencil tube
Power button
Cap
Tip
LED
Lightning port
The LED on Logitech Crayon indicates various statuses such as power on, power off, fully charged, charging, battery level, and firmware update.

Replaceable Parts

The tip of Logitech Crayon can be damaged if dropped or worn down with use. If either of these occur, the tip will need to be replaced to avoid damaging the screen. Replacement tip covers and caps can be purchased from https://support.logitech.com/product/crayon-ipad/spare-parts. Replacement tips can be purchased from https://www.logitech.com/product/crayon- replacement-tip.

Care and Storage Tips

Proper care and storage of Logitech Crayon can help extend its lifespan:

Avoid dropping Logitech Crayon to prevent damage to the tip and other components.
When not in use, always put the cap on to protect the tip.
Store Logitech Crayon in a cool and dry place.

FAQ

What devices are compatible with Logitech Crayon?
Logitech Crayon is compatible with iPad Pro 12.9-inch (3rd gen), iPad Pro 11-inch, iPad Air (3rd gen), iPad mini (5th gen), and iPad (6th gen).

Is Logitech Crayon pressure sensitive?
No, Logitech Crayon is not pressure sensitive. Simply tilt it for thicker or thinner lines.

How long does it take to charge Logitech Crayon?
It takes about 30 minutes to charge Logitech Crayon from 0 to 100%.

PRODUCT SETUP

To start using Logitech Crayon, simply turn on and draw. No software downloads or pairing required. Here are some tips to get started:

Make sure you are using iPad Pro 12.9-inch (3rd gen), iPad Pro 11-inch, iPad Air (3rd gen), iPad mini (5th gen), orÂ iPadÂ (6th gen). These are the only devices that are compatible with Logitech Crayon.
Make sure iPad is updated to iOS 12.2 or above. To check your iOS version, go to iPad Settings â†’ General â†’ Software.
Disconnect any previously connected digital pencils, such as Apple PencilÂ®, prior to using Crayon by going to iPad Settings → Bluetooth → Select the device you want to disconnect. If you do not want to forget other digital pencils, simply turn your Bluetooth® off before using Crayon.
Press the power button for 1 second. If the LED turns green, you’re ready to go. If LED turns red, charge Crayon before use.

SOFTWARE UPDATES

Updating the iOS on your iPad may affect your experience with Crayon. If you notice changes in functionality, simply follow these steps:

Download Logitech Crayon software update at https://support.logitech.com/product/crayon-ipad/downloads
Connect Logitech Crayon to laptop via lightning cable.
Follow the prompts to update software.
To get notifications about software updates, product tips, and more, visit https://support.logitech.com/product/crayon-ipad/register

USE

Use with hundreds of Apple Pencil compatible apps, which are downloadable in the App Store. Logitech Crayon is not pressure sensitive, so there is no need to press down hard on the iPad. Just tilt for thicker or thinner lines.

HOW TO CHARGE

Flip open the cap.
I nsert lightning cable.
Connect cable to a power adapter or computer to charge. It takes about 30 minutes to charge Crayon from 0 to 100%. Note: Crayon will not work while charging.

LED INDICATOR

Fade in green Power on
Fade out green Power off
Solid green Fully charged
Breathing green Charging
Blinking red Battery level is critical (less than 5%)
Red when user presses button Battery level is low (less than 10%)
Green when user presses button Battery level is good
Yellow Firmware update

KNOW YOUR PRODUCT

logitech-54660-Crayon-Digital-Pencil-for-iPad-FIG-3

REPLACEABLE PARTS

The tip can be damaged if Logitech Crayon is dropped and will also wear down with use. If either of these occur, the tip will need to be replaced to avoid damaging the screen.
Replacement tip covers and caps can be purchased at https://support.logitech.com/product/crayon-ipad/spare-parts
Replacement tips can be purchased at https://www.logitech.com/product/crayon-replacement-tip

CARE AND STORAGE TIPS

To preserve battery, power Crayon off when you are done using it. If you forget, Crayon will automatically shut off after 30 minutes of being idle.
Though Crayon is designed with 4-foot drop protection, avoid drops as this might damage the tip of your Crayon or theÂ electronics inside.
Do not leave the cap open as dirt, dust, and other foreign objects can get inside the charging port.
I f you need to clean Crayon, spray a cloth with water or a gentle cleaner (less than 15% alcohol) until itâ€™s damp (notÂ soaked), and wipe the surface of the Crayon. Avoid getting moisture in the charging port, and make sure Crayon isÂ completely dry before storing.