dahua NVR5000-1 Series NVR5216-16P-1 16-Channel 4K UHD ePoE NVR User Guide
- June 4, 2024
- Dahua
Table of Contents
dahua NVR5000-1 Series NVR5216-16P-1 16-Channel 4K UHD ePoE NVR
How to set up IVS rules
Step 1: Go to AI PARAMETERS” > ”IVS”, choose what you want to set up to
receive email alerts, keep Enabled, and click the Trigger icon.
Figure 1: Start from the setup page of the NVR
Step 2: For Tripwire Go to AI PARAMETERS” > ”IVS”, check so at least one
“Tripwire” rule is enabled, and click Draw.
Step 3: Draw the target line for detection using a mouse. Then, click OK
after you have finished.
Step 2: For Tripwire Go to AI > ”PARAMETERS” > ”IVS”, check at least one
“Intrusion” rule is enabled, and click Draw.
Step 3: Draw the target line for detection using a mouse. Then, click OK
after you have finished.
Step 4: Click Trigger to decide the detailed settings of the rule. Then,
click Apply within the trigger screen to save the trigger, and click Apply at
the bottom right of the screen to save the IVS function.
- Design and specifications are subject to change without notice.
- DAHUA UK & IRELAND
- Quantum, 60 Norden Road, Maidenhead, Berkshire SL6 4AY
- Tel: +44 (0) 1628 613 500
- sales.UK@dahuatech.com
- support.UK@dahuatech.com
- If you still encounter problems
- operating your Dahua device,
- please call +44 (0)1628 613 500
Documents / Resources
|
dahua NVR5000-1 Series NVR5216-16P-1 16-Channel 4K UHD ePoE
NVR
[pdf] User Guide
NVR5000-1 Series, NVR5216-16P-1, 16-Channel 4K UHD ePoE NVR, NVR5000-1 Series
NVR5216-16P-1 16-Channel 4K UHD ePoE NVR
---|---