iDO ID115U Smart Bracelet Fitness Tracker User Guide
- June 6, 2024
- iDO
Table of Contents
Smart Bracelet
User Guide
Smart Searching Endless Exploring
Working condition for mobile
Quick Start Guide
-
Download the VeryfitPro app
The smart band needs to pair with the smartphone through the app. Before downloading, please refer to the working conditions for mobile. Way to download 1: Searching the QR code, scan and download the app.
Please use the QR code Scan tool to scan the following QR code and open the link and download the app. In case there is any problem to open the link, please try to copy the link and open it by the browser.
Way to download 2: Search in the phone market and download. Please search and download the ” VeryfitPro ” from App Store or Google play store.
-
Device Activate & Charge
Make sure power is working normally before initial use. In case the device is under low battery, connect the device to the charger. The device will automatically boot up (please connect the USB to a normal DC port (5V-500mA) for charging as below. The host should be separated from the strap when charging).
-
Pair the device
Please make sure the Bluetooth is ON and then open app “VeryfitPro” and go to bind. When searching and pairing the device, please press on the key of the device and activate the device (screen on ). The app will search the device automatically, choose the device name and connect the device to the app.
How to Use
Key Definitions:
Tap: function switch
Long Press: activate, mode switch
Once the device is connected to the app successfully, it will record and
analyze your activities and sleep automatically, Touch the click toggle, the
display order is as follows
-
Normal Mode
Note: alarm mode and find phone will only be displayed on the
screen after switching ON in the APP. -
Remote Camera Shoot Mode
Put the camera shoot ON in the APP, then the device enters in remote shoot screen, control remote photograph shooting with following actions: (lift wrist sense/tap screen) to shoot a picture. -
Sport Mode
-
Notification Mode
Notification Mode instruction:
- Under incoming call, a message notifies mode, the screen will still display the last time text and slide when there is a new notification coming in.
- If there is a call or message come. the device will force into call/message alert mode no matter under whatever other mode, after quitting, it returns to the previous model.
Functions Instruction
Activities Record:
Record daily activities, you could check daily activities including steps,
distance, and calorie consumption in the app;
Sleep Monitoring:
The device could automatically recognize your state and monitor the whole
sleep progress by analyzing the deep sleep and light sleep hours;
Notification Alerts:
Alarm alert, call alert. sedentary alert, etc. by silent vibration;
Anti-Lost:
When the smartphone is beyond the Bluetooth range (5m), the device vibrates to
remind.
Remote Camera Control:
Operation on the screen could control remote photograph shooting.
Device Data Storage:
The activity data will be cleared every O: OOam as a cycle, but the device
itself could restore 7 days’ data, after 7 days, the data will be cleared. We
suggest users sync data with the app at least one time within 7 days during
use.
Wearing and Maintenance
Our products are designed for you to wear throughout the day. So please follow a few brief instructions when you are wearing and maintaining your smart devices. To keep your wristband clean and your skin comfortable, we put forward the following tips:
- Regularly clean your wrist and the smart wristband, especially after sweating in the exercise or being exposed to substances such as soap or detergent which may attach to the internal side of the wristband.
- Do not wash the wristband with a household cleanser. Please use soapless detergent, rinse thoroughly and wipe with a piece of soft towel or napkin.
- For spots or stains that are not easy to remove, scrub with alcohol and then follow the above steps.
FAQ
-
Can’t find the device when pairing the device?
Please make sure the smartphone Bluetooth is ON and smartphone OS Android 4.4 & above and iOS 7.0 & above.
Please make sure the device is near the smartphone when pairing (normal 0.5m) and within the normal Bluetooth communication distance range (within 10m).
Please make sure the device is not under a low battery. If there is still a problem after full charge, please contact us. -
Can’t connect the device with the app?
Some smartphone Bluetooth services will be abnormal when reboot Please reboot the Bluetooth or reboot the smartphone for pairing devices. -
How to Restore Factory Defaults
Make sure the device is connected with app, go in the app, enter “Mine- SystemSetting” and choose “Reboot Device•.
Caution:
- If you experience skin irritation when wearing your watch, please refrain from wearing it, and wait two to three days to see if your symptoms If symptoms persist or worsen, please consult a physician.
- If you have eczema, allergies, or asthma, you may be more likely to experience skin irritation or allergy from a wearable
- How to update the device
Make sure the device is connected with the app, go in the app –Device”-
Device update”, please wait some minutes before the update is done.
Basic Specifications
Model: IDI l5U
CPU: Nordic
Sensor kionix
Host Weight: I 7g
Battery Type: Polymer Rechargeable Li Battery
Battery Capacity: 45mAh
Data Sync: Bluetooth 4.2
Working Temperature: -20C°-45C°
Standby: more than 7 days
Frequency bands: 2402-2480MHz
Maximum output power -3.66dBm(for EU compliance)
This product is applied with a professional Bluetooth RF signal and self- developed algorithm, the accuracy of the step pedometer could be up to 95%.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- – Reorient or relocate the receiving antenna.
- – Increase the separation between the equipment and receiver.
- – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- – Consult the dealer or an experienced radio/TV technician for help.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
|
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycling valuable raw materials and the treatment of toxic substances.
---|---
| ID115U| 105g
---|---|---
60×95mm|
20180725V.1.0| 4.SM.ID115UXGX0