noopsyche K7 Pro III Standard Kit User Guide
- June 5, 2024
- noopsyche
Table of Contents
K7 Pro III Standard Kit
User Guide
Notice
It will auto-run the setting that was saved before the last time the light
was powered off I when it is powered on. Including the Timeline, the program
and the brightness. Requires the Noo—Psyche APP to be installed on your phone
for secure access.
https://noo-psyche.com/Userguidance
IOS users: Please go to App Store to download Noo—Psyche; Android Users:
https://noo—psyche.com/ (Download From User
Guide). Or scan the QR code:
Factory Reset
Switch Colors of LED Indicator: (Tap L Button)
| Indicator | Operation | Indicator turns |
|---|---|---|
| Red | Tap the L | Blue |
| Blue | Tap the L | Red |
| Red | Press&hold the L | Green |
| Green | Press&hold the L | Red |
When the LED indicator stays on red, press & hold the R Button until the
indicator turns off.
Note: Tap L, if the LED indicator Red it means on Manual Mode; If the LED
indicator is Blue, it is on Auto Mode.
Configuring Master/Slave Lighting
- Slaves: When the LED indicator stays on, press & hold the L button until the LED indicator turns green. Then tap the L button (the green indicator light flashes) and it will standby and waiting for linkage. (all of the slaves do the same)
- Master: When the LED indicator stays on blue, press & hold the L button. release the button when the indicator light flashes. (Send a command to the slaves as a Master. After the slaves receive the command, their green indicator will stop flashing)
• Note: After adding a new light as a slave, the brightness is different
with other slaves, how to sync? Operation: Tap the L button of Master to turn
the indicator into red, then press & hold the L button until the indicator
flashes red, then release it to send data to the slaves to sync data.
Connection Mode
There are two connection modes: LAN and AP mode. How to know if the light is
on LAN or AP mode?
| Operation | Indicator | Mode |
|---|---|---|
| Tap the R button | Flashing blue twice | LAN |
| Flashing Red twice | AP |
How to Switch LAN and AP modes of the light?
| Indicator States | Operation | Switch to |
|---|---|---|
| Stay on Blue | Press & hold the R button, the indicator flashes blue, release | |
| the R button when it stops flashing | AP |
Press & hold the R button, the indicator flashes red, release the R button when it stops flashing| LAN
LAN connection
Noo-Psyche devices only support a 2.4GHz routing band
• First you need to make sure the light is in LAN mode. In the blue indicator
state, press & hold the R button until the indicator flashes blue, then
release the button to enter the network waiting for configurating state.
-
Open WiFi on phone. Install and open Noo—Psyche APP, and click the Portrait.
-
Click Apply Permission, select Allow
-
Select LAN connection and enter the router password, save. Connecting… completed, click OK
AP Connection
First, you need to confirm that the light is in AP mode.
-
Open Wi-Fi on phone. Install & open the. APP dirk the. Portrait
-
Click Apply Permission, select Allow.
-
Click SWITCHING NETWORK
-
Find the K7_Pro+number (K7_Pro****) in the WLAN list, enter the password (12345678), and click connect
-
Select AP connection and save. Done
After
completing the connection between the APP and the K7 light, access the options
according to your reef tank type. There are SPS, LPS,SPS/LPS preset. and 2
operating modes: manual and auto mode. For example access LPS.
Manual mode operation steps:
- Select LPS. Green dot means connected
- Pull the bar to adjust the brightness successfully. Select Manual and save it when done.
Auto mode operation steps:
If you want to use the factory settings: select LPS, select Auto, click Save.
A green dot appears on the LPS icon to indicate that LPS mode is currently
being executed.
Steps to modify parameters:
- Select Auto
- Select TIME POINT SETTING
- Click EDIT to set the time point
- Set the brightness of each channel at the time point, and click CONFIRM. Click CLOSE when all is done
- Click SAVE first. Then click Demo Mode (4 Minutes)
Export/Input (Share your spectrum settings via QR code)
Click, then Click Export, it will generate a QR code image in the album. Then
you can share your K7 settings. The input is also entered here, find and scan
the QR code page, save.
Note:
Once the fixtures are restored to factory settings, the linked fixtures will
be canceled!
Warning:
- Suddenly increasing the brightness will harm corals, resulting in coral nervousness, bleaching, death, and other phenomena.
- If switching from weak lights to this light, it is recommended to set the initial total brightness to 50%
Warranty Notes:
All of Noo—Psyche(NP)LED lighting products have 12 months the warranty service from the date of purchase. If there is a quality problem within the warranty, Noo—Psyche will repair or replace the parts free of charge. The warranty is not covered if the product has been damaged due to modification, accident, mishandling, misuse, or if it has been repaired without authorization. Exclusions from the warranty include but are not limited to damage to the product due to misuse or abuse, such as using modified bulbs and modifying electrical circuits.
Specification
Size: 21212731
Weight: 0.78Kg
Power: 140W
Voltage: 100-240V 50/60Hz 3A
Warranty: one year
Tips:
For more details, please visit the
website: www.noo—psyche.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>