dahua MC-PF3-B3-4 Power Cable User Manual
- June 10, 2024
- Dahua
Table of Contents
dahua MC-PF3-B3-4 Power Cable
Product Information
The MC-PF3-B3-4 is a 4-meter long cable designed to power a mobile recorder directly from a vehicle battery. The cable has a metal end and a 3-way female connector strip with push-in connectors of size 6.3mm. It has a voltage rating of 12V and can handle a current of up to 0.35 kg. The cable is manufactured by DAHUA and comes with a 2-year guarantee.
Product Usage Instructions
Before using the MC-PF3-B3-4 cable, ensure that you have read and understood the safety measures mentioned in the user manual. The device must be secured against contact with caustic, staining, and viscous fluids.
To use the cable, follow the below instructions:
- Locate the vehicle battery and ensure that the engine is turned off.
- Connect the metal end of the cable to the positive terminal of the vehicle battery.
- Connect the 3-way female connector strip of the cable to the mobile recorder’s power input port.
- Turn on the engine and check if the mobile recorder powers up.
Note: The MC-PF3-B3-4 cable comes with a fuse that protects the device from voltage fluctuations. If the fuse blows, replace it with a new one of the same rating.
Warning!
Please read the user manual included in this work as it contains important
information related with safety of installation and use of the device.
Only persons who read the user manual may use the device.
The user manual must be kept because it may be required in the future. The
device is to be used exclusively for purposes specified in this user manual.
The device must be unpacked prior to starting-up. After removing the packaging
make sure the device is in working order.
If the product has defects, it should not be used until it is repaired.
The product is intended for use at home and commercial use and may not be used
for other than intended use.
The manufacturer is not liable for damages resulting from not adhering to the
rules contained in the user manual, therefore, we recommend to follow the
aforementioned safety rules for operation and maintenance of the device. In
this way you will ensure yourself safety and avoid causing damage to the
device.
The manufacturer and the supplier are not liable for losses or damages arising
out of the product, including financial or intangible losses, loss of profits,
income, data, pleasure from use of the product or other products related with
it – indirect, incidental or consequential loss or damage. The above
provisions apply whether the loss or damage concerns:
- Deterioration of quality or the lack of operation of the products or products related with it due to damage as well as the lack of access to the product when it is undergoing repair, which results in stoppage the loss of user’s time or a break in business activity;
- Improper results of operation of the product or products related with it;
- It applies to losses and damages according to any legal category, including negligence and other losses, termination of a contract, expressed or implied guarantee and strict liability (even if the manufacturer or the supplier was notified about the possibility of occurrence of such damages).
Safety measures
Particular attention at designing was directed to quality standards of the
device where ensuring safety of operation is the most important factor.
The device must be secured against contact with caustic, staining and viscous
fluids.
The device was designed in such a way that it restarts operation when power
supply is restored after a break.
Turn off the device before transporting it.
Prior to connecting the device to a power source check whether the supplied
voltage is consistent with rated voltage specified in the user manual.
Attention! We recommend using protections to further protect the device from
possible overvoltages in installations. Surge protectors are effective
protection against accidental pass to the device voltages higher than the
rated. Damages caused by pass the voltages higher than specified in manual,
are not under warranty.
Proper product disposal
A marking of a crossed out waste bin indicates that the product may not be
disposed together with other household waste in the entire EU. To avoid
possible damage to the natural environment of health due to uncontrolled waste
disposal, therefore, it should be handed over for recycling, propagating in
this way sustainable use of natural resources.
To return a worn-out product, use a collection and disposal system of this
type of equipment or contact a seller from whom it was purchased. He will then
be recycled in an environmentally-friendly way.
It is forbidden to use the device in case its power cord or plug is damaged,
the device works incorrectly, was damaged or dropped. A damaged power cord or
plug must be replaced with new ones by the manufacturer, personnel of service
centre or a person with relevant qualifications in order to avoid the risk of
electric shock. We do not recommend repairing the device on one’s own for
safety reasons.
The device is not intended for operation by persons (including children) with
limited physical, sensory or mental capabilities as well as persons
inexperienced in operation or not competent to operate of such device, unless
the operation is supervised by a person responsible for their safety or in
line with instructions for use provided by such person.
It is forbidden to touch the plug with wet hands! Pull the plug, never the
cable, to pull out the plug from a socket.
The device is to be used exclusively according to its use described in this
manual. Use of accessories not recommended by
the manufacturer of the device may cause fire, electric shock or injuries.
Marking of a lightning inside a equilateral triangle signifies presence of
dangerous voltage, contained under the cover of the device. It may be
dangerous for user’s life and health.
The cable to power the mobile recorder directly from the vehicle battery.
Cable:| Metal ends / 3-way female connector strip with push-in connectors
6.3mm
---|---
Length of the cable:| 4 m
Voltage:| 12 V
Current:| max. 20 A
Main features:|
- Very easy and quick assembly
- Solid workmanship
- 20A car fuse on the cable
Weight:| 0.35 kg
Manufacturer / Brand:| DAHUA
Guarantee:| 2 years
Connectors
Fuse
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>