Taylor 9842 Waterproof Digital Thermometer Instruction Manual
- June 14, 2024
- TAYLOR
Table of Contents
Taylor 9842 Waterproof Digital Thermometer
Thank you for purchasing a Taylor® Waterproof Digital thermometer. This state- of-the-art measurement instrument is engineered and designed to meet the highest quality standards…to assure you uncompromising accuracy and consistently dependable, convenient performance. In order to optimize its function, please read this instruction manual carefully before use…and keep it handy for future reference.
General Operation
- Sterilize the metal probe by inserting it into an appropriate solution such as boiling water for several minutes.
- Turn the unit on with the “On/Off” button located on the dial face. Select Fahrenheit or Celsius using the button marked “ºF/ºC”. Note: To save battery life, this unit has an AUTO-OFF feature that turns the instrument off after 10 minutes if no change in temperature has occurred.
- When ready to test the temperature, insert the stem at least 1″ for the most accurate reading. The LCD will stabilize when the reading is complete (approximately 10 seconds).
- To avoid burns near heat, use the pocket sleeve as a handle by inserting the stem through the small hole at the top of the pocket sleeve.
- Be sure to sanitize the stem before inserting it into another product (See Antimicrobial Feature).
Description of Parts
Battery Replacement
The thermometer operates on a 1 LR44 (1.5v) battery (installed). Change the battery when the display becomes dim. To replace the battery:
- Open the battery door by sliding a screwdriver under the lip of the rubber battery door.
- Tap the unit against your hand with the battery opening down to make the battery slide out.
- Insert the battery with the positive side up (square end of the battery)
- Push the rubber door in firmly so that the battery is all the way in position.
- Note: If the battery door is not closed properly, water can get into the battery compartment causing the unit to malfunction.
- It is recommended to only remove the battery door when necessary to replace the battery as this will help maintain water-tight integrity.
Antimicrobial Feature
Taylor’s Safe-T-Guard™ sleeve and housing incorporates a non-toxic chemical compound that inhibits the growth of harmful pathogens, which minimizes cross- contamination. It is important to thoroughly clean and disinfect your thermometer after each use.
CAUTION: Not for use as an oven thermometer. Do not leave it in the oven. LCD case temperature exposure limits are 10° to 140°F. Do not expose the stem tip to temperatures 50°F above or below the measurement range (see Specifications).
Specifications
- Measurement Range: -40 to 450°F (-40 to 230°C)
- Accuracy:
-
- +/- 1°F (.06°C) from 0 to 230°F (-18 to 110°C)
- +/- 3.6°F (2°C) above 230°F (110°C) and below 0°F (-18°C)
- Repeatability: 1°F (.55°C) from 0 to 200°F (-18 to 93°C)
- Battery: One (1) LR44, 1.5-volt alkaline (included)
- Resolution: 0.1°F & °C full range
- Temperature Display: °C or °F selectable
- Auto Shut-off: After 10 minutes if no change in temperature has occurred.
- Stepdown Probe: 1.5mm diameter
- Response Time: 6 seconds, with 2-second updates.
Calibration
Digital thermometers that have a bead-type thermistor sensor such as the model 9842 seldom require recalibration or testing. The reason for this is the long- term stability of the thermistor sensor. Nevertheless, if it is desirable to calibrate to a specific temperature, turn the calibration screw on the dial to the left to decrease the temperature reading or to the right to increase the reading. The following procedure is recommended if recalibrating at 32°F (0°C).
- Fill a container with crushed or chipped ice.
- Add water slowly until it overflows.
- Add more ice until it is packed tightly to the bottom of the container, allowing excess to overflow.
- Insert the stem of the thermometer at least 2” into the container and allow it to stabilize for 5 minutes.
- Note: It is important that the tip of the thermometer not touch the bottom of the container.
- If the temperature reading is 32°F, the thermometer is accurately calibrated. If necessary to adjust the thermometer, do so in small amounts and allow it to stabilize before making any additional adjustments.
One-Year Limited Warranty
This product is warranted against defects in materials or workmanship for one (1) year for the original purchaser from the date of original purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair. Should this product require service (or replacement at our option) while under warranty, do not return it to a retailer. Please pack the item carefully and return it prepaid, along with the store receipt showing the date of purchase and a note explaining the reason for return to:
Taylor Precision Products
- 2220 Entrada Del Sol
- Las Cruces, New Mexico 88001 USA
- www.taylorusa.com
There are no express warranties except as listed above. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
Made to our exact specifications in China.
© 2007 Taylor Precision Products and its affiliated companies, all rights reserved. Taylor® and Leading the Way in Accuracy® are registered trademarks of Taylor Precision Products and its affiliated companies. All rights reserved.
Frequently Asked Questions
How do I turn on the Taylor 9842 Waterproof Digital Thermometer?
To turn on the thermometer, press the On/Off button located on the dial face.
How do I switch between Fahrenheit and Celsius temperature readings?
You can switch between Fahrenheit and Celsius by using the button marked ºF/ºC.
What should I do if the display becomes dim or the thermometer stops working?
If the display becomes dim or the thermometer stops working, it may be time to replace the battery. The thermometer operates on a 1 LR44 (1.5v) battery, and you can replace it as described in the manual.
Is the Taylor 9842 Waterproof Digital Thermometer suitable for use in an oven?
No, this thermometer is not intended for use as an oven thermometer. Do not leave it in the oven. The LCD case temperature exposure limits are 10° to 140°F. Do not expose the stem tip to temperatures 50°F above or below the measurement range.
How can I clean and disinfect the thermometer to prevent cross-contamination?
The thermometer features Taylor's Safe-T-Guard™ sleeve and housing with an antimicrobial feature that inhibits the growth of harmful pathogens. After each use, thoroughly clean and disinfect your thermometer.
Can I calibrate the Taylor 9842 Waterproof Digital Thermometer?
Yes, you can calibrate this thermometer if desired. The manual provides instructions on calibration, and it involves turning the calibration screw on the dial to adjust the temperature reading.
What is the warranty for the Taylor 9842 Waterproof Digital Thermometer?
The product comes with a one-year limited warranty for defects in materials or workmanship from the date of original purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair.
Where should I contact for warranty service or support?
If you require warranty service or support, do not return the product to a retailer. Pack the item carefully and return it prepaid, along with the store receipt showing the date of purchase and a note explaining the reason for return to Taylor Precision Products at the provided address.
Can I use this thermometer for measuring the temperature of liquids?
Yes, you can use this thermometer to measure the temperature of liquids. Just be sure not to immerse the entire thermometer in liquids, as it is designed to be waterproof but not fully submersible.
How deep should I insert the stem for accurate temperature readings?
To get the most accurate reading, insert the stem of the thermometer at least 1 inch into the substance you want to measure.
What is the temperature measurement range of this thermometer?
The measurement range of the Taylor 9842 Waterproof Digital Thermometer is -40 to 450°F (-40 to 230°C), providing a wide range for various cooking and temperature measurement needs.
How long does it take for the thermometer to stabilize and provide a reading?
The thermometer typically stabilizes and provides a reading within approximately 10 seconds after inserting the stem into the substance being measured.
Download This PDF Link:Taylor 9842 Waterproof Digital Thermometer Instruction Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>