JBL VIBE 200TWS True Wireless In Ear Headphone User Guide

: June 6, 2024
: JBL

Table of Contents

JBL VIBE 200TWS True Wireless In Ear Headphone
How to wear
FIRST TIME USE
power on & CONNECT
DUAL CONNECT
BUTTON COMMAND
power off
Manual Controls
Charging
LED behaviors
IC RF Exposure Information and Statement
Head operation
DOWNLOAD RESOURCES
FAQ’S
VIDEO
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JBL VIBE 200TWS True Wireless In Ear Headphone

JBL-VIBE-200TWS-True-Wireless-In-Ear-Headphone-PRODUCT

JBL VIBE 200TWS True Wireless In Ear Headphone

How to wear

FIRST TIME USE

power on & CONNECT

DUAL CONNECT

BUTTON COMMAND

power off

Manual Controls

Charging

LED behaviors

TECH SPEC

Model:	VIBE200TWS
Driver size:	8 mm/ 0.315” Dynamic Driver
Power supply:	5 V 1 A
Weight:	47.5 g/ 0.105 lbs
Headset battery type:	Lithium-ion Battery (48 mAh/ 3.7 V)
Charging case battery type:	Lithium-ion Battery(500 mAh/ 3.7 V)
Charging time:	2 hrs from empty
Music playtime with BT on:	up to 5 hrs
Frequency response:	20 Hz – 20 kHz
Impedance:	16 ohm
Sensitivity:	108 dB SPL@1 kHz
Maximum SPL:	93 dB
Microphone sensitivity:	-38 dB/Pa @1 kHz
Bluetooth version:	5.0
Bluetooth profile version:	A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth transmitter frequency range:	2.400 GHz – 2.4835 GHz
Bluetooth transmitter power:	12 dBm
Bluetooth transmitter modulation:	GFSK, π/4 QPSK, 8DPSK
Maximum operation temperature:	45°C

TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTING.

IC RF Exposure Information and Statement

The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLV200TWS) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.206 W/Kg.The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories
that maintain a separation distance of 0mm between the user›s head and the back of the headset. The use of belt clips, holsters, and similar accessories shall not contain metal parts in its assembly. The use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

Head operation

The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user›s ear and the product (including the antenna). Head exposure that does not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

IC: 6132A-JBLV200TWS
FCC ID: APIJBLV200200TWS

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by HARMAN International Industries, Incorporated is under license.

Other trademarks and trade names are those of their respective owners.

DOWNLOAD RESOURCES

JBL VIBE 200TWS True Wireless In Ear Headphone [pdf] User Guide VIBE 200TWS, True Wireless In Ear Headphone, VIBE 200TWS True Wireless In Ear Headphone, In Ear Headphone, Headphone
Read more: https://manuals.plus/jbl/vibe-200tws-true-wireless-in-ear-headphone-manual#ixzz7kdYk5iKR

FAQ’S

How do I get the best sound quality out of my JBL VIBE 200TWS?

Please make sure that your phone’s Bluetooth is on and that it is close by. Also, please make sure that you are not connected to any other wireless devices.

How do I connect my JBL VIBE 200TWS to my phone?

Please follow the instructions in the user guide for a step-by-step guide on how to connect your JBL VIBE 200TWS to your phone.

How do I use the buttons on my JBL VIBE 200TWS?

Please follow the instructions in the user guide for a step-by-step guide on how to use the buttons on your JBL VIBE 200TWS.

How do I connect my JBL VIBE 200TWS to another device?

Please follow the instructions in the user guide for a step-by-step guide on how to connect your JBL VIBE 200TWS to another device.

Does JBL Wave 200 TWS have noise cancellation?

The Wave 200TWS’ microphone was just as good as its audio. It was clear and crisp enough for voice calls which is another thing we appreciate. And since it didn’t feature any noise-cancelling options, it captured all the sounds in our surroundings.

Does JBL Wave 200 TWS have microphone?

JBL Wave 200 TWS, True Wireless in-Ear Earbuds with Mic, 20 Hours Playtime, JBL Deep Bass Sound, use Single Earbud or Both, Bluetooth 5.0, Type C & Voice Assistant Support for Mobile Phones (Blue)

How do I answer a phone call with my earbuds?

Once your earbuds are paired or plugged in, you should be ready to go. When a call comes in, there will be a button on the earbuds that you press to answer calls. That will connect the call and allow you to carry on a conversation without having to physically hold your phone.

Does JBL do lifetime warranty?

The JBL Warranty on professional loudspeaker products (except for enclosures) remains in effect for five years from the date of the first consumer purchase. JBL amplifiers are warranted for three years from the date of the original purchase.

What do the lights mean on JBL earbuds?

Low battery: The LED indicator on the right earbuds blinking white. Charging: The LED indicator on the right earbuds light white. Full charge: The LED indicator on the right earbuds turns off.

How do you know if JBL headphones is fully charged?

The light stops blinking once the headphones are fully charged.

Can you pair JBL earbuds to iPhone?

And on the very bottom that’s where we find the jbl tune 215 tws we’re going to select this. And the earbud is going to be immediately paired to our iphone.

How do I get my earbuds in pairing mode?

First, make sure that your earbuds are turned off. If they’re not, press and hold the power button until they turn off. Once they’re off, press and hold the power button for about 10 seconds. This will put your earbuds into “pairing mode.”