POLARIS IN-SE-P-RZRXP4-001 Primal Soft Cab Enclosure Upper Doors Instruction Manual

 POLARIS IN-SE-P-RZRXP4-001 Primal Soft Cab Enclosure Upper Doors

Product Information

Specifications :

• Product Name: Soft Cab – Upper Door Kit
• Model Number: IN-SE-P-RZRXP4-001
• Date of Manufacture: 12/15/2021

Product Usage Instructions

Installation

1. Read the instructions and view the illustrations before beginning the installation.
2. Cut the Hook and Loop fastener and install it to the locations shown for the driver’s side and passenger’s side.
3. Repeat the process for the opposite side.
4. Place the Soft Cab onto the machine and align it properly. Loosely secure the straps.
5. Secure the flaps to the Hook and Loop fastener at the rear and front of the Soft Cab for the driver’s side.
6. If the Soft Cab is to be secured with snaps, refer to pages 11-12 for further instructions.
7. Cut and secure Hook and Loop fastener to the flaps on the lower portion of the doors for the driver’s side and passenger’s side.
8. Peel off the backing from the Hook and Loop fastener. Fold the flap down and firmly press along the areas where Hook and Loop is installed. Wait for 15-30 minutes for the adhesive to set up.
9. Carefully open the flap; use one hand to gently separate the Hook and Loop fastener from the flap and plastic while opening.
10. If necessary, apply more heat to the Hook and Loop fastener.
11. Cinch all straps tight.

Snaps Installation

1. Outline the snaps with a paint marker, lipstick, or marker.
2. To mark the locations, press the snaps onto the body or Velcro.
3. Install the provided snaps according to the marked locations.

FAQ (Frequently Asked Questions):

1. Q: How can I speed up the process of removing whiteness, clouding, wrinkles, or waves from the Soft Cab?
   A: You can use a heat gun or hair dryer to apply heat to the Soft Cab. However, make sure not to overheat or concentrate heat in one area for an extended period of time.

2. Q: Should the windows be rolled up when trailering the machine?
   A: Yes, it is recommended to roll up the windows when trailering the machine to ensure their protection.

3. Q: Where can I get help with my installation?
   A: You can contact Super ATV customer support through the following channels:

4. Email: sales@superatv.com

5. Website: www.superatv.com

6. Phone: 1-855-743-3427

7. Support Hours: 8:00am – 8:00pm EST (Mon-Thurs), 8:00am – 7:00pm EST (Friday), 9:00am – 2:00pm EST (Saturday)

Notes:

• Hook and Loop Fasteners should be applied at a temperature of 70°F or above.
• Use Denatured Alcohol and thoroughly clean any area where Hook and Loop Fasteners will be installed.
• Installing and adjusting Soft Cab is easier with two people.
• When cleaning Soft Cab, use soap and water only. Do not use detergent, window cleaner, solvents.
• Do not use a dry cloth or rag on windows.
• Do not fold Soft Cab before storing. Zip windows closed and roll Soft Cab to store.
• Do not discard packaging until product has been successfully installed.
• Doors may be secured with Snaps only, Hook and Loop Fastener only, or a combination of Snaps and Hook and Loop Fastener.
• Any whiteness, clouding, wrinkles, or waves that develop will gradually disappear when Soft Cab is exposed to sunlight and/or heat. Use a heat gun or hair dryer to speed up this process. Do not overheat or heat in one area for an extended period of time.
• Windows must be rolled up when trailering machine.
• Need help with your installation?
  • sales@superatv.com
  • 1-855-743-3427
  • www.superatv.com 8:00am – 8:00pm EST M-Th 8:00am – 7:00pm EST Friday 9:00am – 2:00pm EST Saturday
• Read instructions and view illustrations before beginning.
  • IN-SE-P-RZRXP4-001 12/15/2021

Liability Statement

• SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact SuperATV® to verify that they will work together.
• Although SuperATV® has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warrant or representation is made as to this product’s ability to protect user from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times.
• By purchasing and installing SuperATV® products, user agrees that should damages occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim.
• SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and products are not warrantied if item was not installed properly, misused, or modified.
• Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.
• The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.

INSTALLATION STEPS

• Place Soft Cab onto machine and align.
• Loosely secure Straps.
• Secure Flap to Hook and Loop.
• Secure Flap to Hook and Loop.
• Secure Flap to Hook and Loop.
• If Soft Cab is to be secured with Snaps, go to pages 11 – 12.
• Cut and secure Hook and Loop to flaps on lower portion of Doors.
• Peel backing from Hook and Loop.
• Fold flap down and firmly press along areas where Hook and Loop is installed.
• wait 15 – 30 minutes for adhesive to setup
• Carefully open flap; use one hand to gently separate Hook and Loop from flap and plastic while opening.
• Apply more heat to Hook and Loop Fastener.
• Snaps installation:
  • Outline Snaps with a paint marker, lipstick, or marker.
  • To mark locations, press Snaps onto Body or Velcro.
  • Install provided Snaps.

References

• SuperATV.com
• superatv.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>