amzchef SK-20CB16T Single Induction Cooker User Manual
- June 9, 2024
- amzchef
Table of Contents
SK-20CB16T Single Induction Cooker
User Manual Model:SK-20CB167
SK-20CB16T Single Induction Cooker
Thank you for purchasing this product, please read the manual carefully before using and keep it for future reference.
Parts Name
Model | Power Rate | Voltage | Temperature | Max Currency |
---|---|---|---|---|
SK-20C1316T | 2000W | 220-240V 50-60HZ | 80*C-240t | 15A |
Power (Watt) | 300 | 500 | 600 | 800 |
--- | --- | --- | --- | --- |
Temperature | 60 | 80 | 100 | 120 |
Salient Features
- High and controlled heating from start to finish with an efficiency of 93% without any wastage of electricity. The entire equipment is 100% free from shock with microcomputer inspection and superior body structure.
- Induction cooker will not produce any flame, heat or smoke, keeping the kitchen clean.
- Cooking can be performed even from outside kitchen due to the merits of the cooker.
- Induction cookers have an elegant look which will be a decoration for the kitchen.
- It can be carried to anywhere since the weight of the cooker is very light.
General Instructions
- Do not plug into a socket where several other appliances are plugged in.
- Don not use if the plug cord is damaged or when the power plug does not fit the socket.
- Do not modify the parts, or repair this unit, the supply cord must be replaced by qualified technicians.
- Do not use this unit near an open flame or wet places.
- Keep out of children’s reach.
- Place on a stable, even surface.
- Do not heat or overheat the pot empty
- Do not place metallic objects such as knives, forks. spoons, lids, cans and aluminum foils on the top surface or under the bottom of the stove.
- Allow sufficient space around the cooking area (keep a minimum distance of 5 to 10 cm from the unit to walls or other items).
- Never use the unit on low-heat-resistant materials(carpet. vinyl).
- Do not place paper between the pot or the pan and the unit. The paper may get burnt
- Do not block air intake or exhaust vent.
- Caution The surface will remain hot for a period of time after use from the radiant head.
- Unit can affect the items having or attracting magnetic fields. such as Radios, televisions, automatic, banking cards and cassette tapes.
- Do not use the unit on the metallic surface.
- Do not disconnect the power cord immediately after cooking, at least 15 seconds is necessary to cool down the unit.
- WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric stock.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play the appliance. Cleaning and user maintenance shall note be made by children unless they are order than 8 and supervised. Keep the appliance and its cord out of reach of children less than 8 years
Operation Step
When power on, the cooker will beep once. the indicators of “W” and ” and
display screen glisten once and disappear. The induction cooker enters into
standby mode. You will hear a beep each time a touch is registered.
1 On/off button
1 ) Put the suitable vessel in the center
2) Gently press the button.The display screen shows “-on–
3) Press button to select cooking mode accordingly.
Powe mode: the indicator of “Or will be on.The display screen will show
default power “1000-. .Temperature mode: the indicator of `X:- will be on. the
default temperature is 2001: ).
4) Press’ ” or ” to adjust the power/temperature.
5) Under any condition, press button, it will be back to standby mode.
6) Press again to switch of the unit. then plug out.
2. Timer
1 ) Time range from 1 minutes to 3 hours.
2) Under cooking mode. Press’ ” to set when the unit will be Timer (shut
down).
3) Press ” or ” to adjust the time.
Press ” or ” the timer will be increased 10mins.
• .Short press ” ” once. the timer will be decreased 1min, and long press for
decreasing 10mins.
4) The timer will be set done when there is no operation for 5 seconds. 5) the
display screen will shows power/temperature and remaining time alternately
every 5 seconds.
6)During cooking, press the again to cancel the function.
3. Lock
1 Lock: under cooking mode. Press ” once. all buttons will be blocked except
the “button.The display screen will show -Loc”
2) Un-lock: Press for 3 seconds, all buttons will be released.
Working Principle
The Induction Cooker is mainly based in the electromagnetic induction technology. The sophisticated electronic circuitry of the induction hob produce high frequency electromagnetic field resulting high heat energy which heats up the bottom of the vessel and pass on the food directly effecting very fast cooking with thermal efficiency up to 93%
Choosing the right Cookware for induction
• Only use cookware with a base suitable for induction cooking Look for the induction symbol on the packaging or on the bottom of the pan.
Induction
• You can check whether your cookware is suitable by carrying out a magnet
test. Move a magnet towards the base of the pan. If it is attracted. the pan
is suitable for induction.
• If you do not have a magnet.
1. Put some water in the pan you want to check
2. Turn on and wait for 3 minutes to check if water gets hot.
• Cookware made from the following materials is not suitable: pure stainless
steel, aluminum or copper without a magnetic base. glass. wood, porcelain,
ceramic, and earthenware.
Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth, sits flat against the
glass, and is the same size as the cooking zone. Always center your pan on the
cooking zone.The diameter may not be less than 12 cm to ensure that the energy
field has an effect. Do not use pans with a diameter in excess of 26 cm.
Always lift pans off the induction cooker – do not slide, or they
may scratch the glass.
Troubleshooting
Problem | Possible causes | What to do |
---|---|---|
The hob cannot be turned on. | No power. | Make sure the hob is connected to the |
power supply and that it is switched on.
Check whether there is a power outage in your home or area. If you’ve checked
everything and the problem persists, call a qualified technician.
The touch controls are unresponsive.| The controls are locked.| Unlock the
controls. See section ‘Using
your induction cooktop’ for instructions.
The touch controls are difficult to operate.| There may be a slight film of
water over the controls or you may be using the tip of your finger when
touching the controls.| Make sure the touch control area is dry and use the
ball of your finger when touching the controls.
The glass is being scratched.| Rough-edged cookware.
Unsuitable, abrasive scourer or cleaning products being used.| Use cookware
with flat and smooth bases. See ‘Choosing the right cookware’.
See ‘Care and cleaning’.
Some pans make crackling or clicking noises.| This may be caused by the
construction of your cookware (layers of different metals vibrating
differently).| This is normal for cookware and does not indicate a fault.
The induction hob makes a low humming noise when used on
a high heat setting.| This is caused by the technology of induction cooking.|
This is normal, but the noise should quieten down or disappear completely when
you decrease the heat setting.
---|---|---
Fan noise coming from the induction hob.| A cooling fan built into your
induction hob has come on to prevent the electronics from overheating. It may
continue to run even after you’ve turned the induction hob off.| This is
normal and needs no action. Do not switch the power to the induction hob off
at the wall while the fan is running.
Pans do not become hot and appears in the display.| The induction hob cannot
detect the pan because it is not suitable for induction cooking.
The induction hob cannot detect the pan because it is too small for the
cooking zone or not properly
centred on it.| Use cookware suitable for induction cooking. See section
‘Choosing the right cookware’.
Centre the pan and make sure that its base matches the size of the cooking
zone.
The induction hob or a cooking zone has turned itself off unexpectedly, a tone
sounds and an error code is displayed (typically alternating with one or two
digits in the cooking timer display).| Technical fault.| Please note down the
error letters and numbers, switch the power to the induction hob off at the
wall, and contact a qualified technician.
Warning Codes & Safety Protection
When the cooker experiences unsuitable operations from you or by other means.
the cooker stops functioning exhibiting relevant codes on the display screen.
This is meant only for the protection of the cooker and guidance to you.
Error code | Cause | Solution |
---|---|---|
EO | Unplaced cookware, cookware | |
material discrepancies or diameter less than 12cn | Place pans and choose the |
right cookware
El| Voltage lower than 85V| Abnormal voltage until the voltage returns to
normal
E2| Voltage higher than 27W| Abnormal voltage until the voltage returns to
normal
E3| Surface sensor open or short circuit| Please call customer service or
consult a professional repair outlets
E4| IGBT sensor open or short circuit| Please call customer service or consult
a professional repair outlets
E6| IGBT temperature over than 110 degree, over heat protection| Check the
cooker inlet and outlet whether the blockage, or if the cooker cooling fan
running or not
E7| Surface Sensor Failure| Please call customer service or consult a
professional repair outlets
EC| Light Board and Main Board
Communication Failure| Please call customer service or consult a professional
repair outlets to check the connector of Light Board and Main Board
Maintenance
- Clean after each used. Disconnect plug and wait the unit has cooled down.
- If the surface plate gets dirty, clean it with wet cloth, wash directly.
- Maintain the unit clean, avoid the insects go inside the unit, the performance.
- For the ventilation part clean with tooth brush or cotton.
- If something wrong with the unit, repaired by professionals only.
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.
The device meets the requirements of Regulation 2014/35/EU as well as the
applicable standards EN 60335-1:2012/A13:2017;EN 60335-2- 9:2003/A13:2010;EN
62233:2008
Manufacturer: Zhongshan SUKIO Electric Appliance Co., Ltd.
Add.: No.1 Jian’an Road, Nantou Town 528427
Zhongshan City, Guangdong, China
Name: APEX CE SPECIAUSTS UMITE0
Add.:UNIT 30 NORTH POINT HOUSENORTH POINT BUSINESS PARK.
NEW MALLOW ROAOCORK.T23 AT2RIRELAND
WEEE-Reg.-Nr.DE 31195458
LUCID-Reg.-Nr.DE5324933069191
2-YEAR WARRANTY
Thank you for choosing AMZCHEF product. We sincerely hope that you are
satisfied with it.
This product is warranted against any electronic or mechanical defects for a
period of 2 year from the date of original purchase by the consumer.
Replacement unit/parts will be warranted for the remaining portion of the
original warranty period.
Questions? Problems? Concerns?
If you need any help, please feel free to contact us, via our website:
www.iamzchef.com
email: info@iamzchef.com.
Problem + Order number+ a photo or a video attached in the email would help us
solve the problem better and faster.
We will get back to you within 24 hours once we received the email.
Agent/Distributor is welcome to contact us. Email:info@iamzchef.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>