SOLTEC SUNDIAL 3W Solar Bollard Light Installation Guide
- June 6, 2024
- SOLTEC
Table of Contents
SUNDIAL 3W Solar Bollard Light
SUNDIAL Solar Bollard Light 3W Installation Manual SOLTECH Provides Advanced
LED
Technology Powered With Eco-friendly, Clean, Solar Energy.
SUNDIAL 3W
01 Introduction
Thank you for purchasing SUNDIAL Urban Lighting Products.
Important
Please read these instructions before installation to ensure optimum results
and longevity of your lights. The solar panel should be charged in full
sunlight for 8 to 9 hours before initial first use to provide optimum results.
Features
- Solar panel has a full 360 design to track full sunlight source.
- Polycarbonate PC protective light cover.
Notice & Warning
- The SUNDIAL will provide optimum performance where there is enough sunshine.
- Please note the lighting time depends on sunshine exposure and weather.
- The lamp will automatically turn on at dusk.
- Non-professionals please do not disassemble the lamp.
- The battery contains hazardous chemicals. Please dispose of used batteries properly.
Please Note Continuous rain or cloudy days will not fully charge the battery, so the light’s output length will decrease.
Notice & Warning
- The SUNDIAL will provide optimum performance where there is enough sunshine.
- Please note the lighting time depends on sunshine exposure and weather.
02 Specification
Ordering Information Chart
03 Installation
GROUND MOUNT
1 Drill three holes in the base material, then use the screw kit to secure the ground mount base.
When installing the ground
mount base, please put
Part A and Part B into the
ground holes first then
install the ground mount
base on top.
2 Use the screw kit to fix the pole onto the ground mount base.
3 Press the red button on the bottom of the fixture to turn it on.
4 Use the screw kit to fix the light onto the pole.
WALL MOUNT
01 Drill three holes on the base of the existing surface then use the screw kit to secure the surface mount base.
When installing the surface mount
base, please put Part A and Part B
into the surface holes first then install
the surface mount base on top.
02 Use the screw kit to fox the pole onto the surface mount base.
03 Press the red button on the bottom of the fixture to turn it on.
04 Use the screw kit to fix the light onto the pole.
04 Luminous Distribution
SUNDIAL 3W
05 Warranty
SUNDIAL is covered by a 3 year limited warranty. SOLTECH urban light warrants
to the original purchaser that this product is free from defects in materials
and workmanship for the period of 3 years from date of purchase. To obtain
warranty service please contact your local distributor or sales rep for
further instruction.
SOLTECH Provides Advanced LED Technology Powered With Eco-friendly, Clean,
Solar Energy.
1460 Park Avenue. Emeryville, CA 94608 USA
www.soltechlighting.com
SOLTECH LLC reserves the right to update all product data sheets at any time.
Consult SOLTECH marketing specialists for publication updates at
[email protected]
08
Copyright©20212022 SOLTECH LLC, All Rights Reserved.