ID-COOLING AM5-AM4 Height Low Profile CPU Cooler Instruction Manual

Installation Manual
AlO

Component List

1)LGA1700/1200 Backplatex1
2)Intel Bracketx1
3) AMD Bracketx1
4) Tightening Nutx4
5)LGA1700 Standoffx4
6) LGA1200/115X Standoff x4| 7) AMD Standoffx4
8)Plastic Insulatorxd
9) LGA20xx Standoffx4
10) Thermal Greasex1

1. Radiator Mounting Screwx8
2. Fan Mounting Screwx8
   ---|---

Fan & Radiator Mounting

Using the fan mounting screws to secure the fan(s) onto the radiator. Using the radiator mounting screws to secure the radiator to the case panel.

Intel Bracket Illustration

Intel Backplate Illustration

The Intel backplate is designed for LGA1700 and LGA1200/115X sockets. Push the screws to the outside for LGA1700. Push the screws to the inside for LGA1200/115X.

INTEL MOUNTING

Align the arrows on the bracket and the pump base, tumn the bracket clockwise to secure it to the pump base:

• The Intel bracket is universal for LGA2066/2011/1700/1200/115X.

Intel LGA2066/2011

1. Thread the LGA2066/2011 standoff into the motherboard CPU cooler mounting holes.
2. Clean the CPU surface and apply a thin layer of thermal grease onto the CPU.
3. Put the pump onto the CPU. Secure the block using the tightening nuts

Intel LGA1700

1. Push the screws on the backplate to the outside and then put the backplate from the back of the motherboard and insert the long screws through the motherboad
2. Put the LGA1700 Standoff onto the long screws of the backplate.
3. Clean the CPU surface and apply a thin layer of thermal grease onto the CPU.
4. Put the pump onto the CPU.Secure the block using the tightening nuts.

Intel LGA1200/115x

1. Push the screws on the backplate to the inside and then put the backplate from the back of the motherboard and insert the long screws through the motherboad
2. Put the LGA1200/115X Standoff onto the long screws of the backplate.
3. Clean the CPU surface and apply a thin layer of thermal grease onto the CPU.
4. Put the pump onto the CPU. Secure the block using the tightening nuts.

AMD AM4/AMS5

Align the arrows on the bracket and the pump base,and then tur the bracket clockwise to secure it to the pump base.
AMD AM4/AMS5

1. Remove the original retention frame from the motherboard, but keep the backplate.
2. Thread the AM4 standoffs onto the backplate.(Put the plastic insulator between motherboard and the metal standoffs.)
3. Clean the CPU surface and apply a thin layer of thermal grease onto the CPU.
4. Putthe pump onto the CPU. Secure the block using the tightening nuts.

5V 3pin Addressable RGB Connection

Use Motherboard RGB Control
Download RGB Sync software tht s compatble with your motherboard from Matherboard manufacturer’s website and acjust RGB color / mode in software. Use Internal RGB Controller (Optional) Switch the lighting modes with ‘M’ button.
Switch the calor modes with ‘C’ button.
Change the speed of the color changing with ‘S’ button.

CAUTION
Wrong connection will damage the device and cause mal-function!
Use RGB Spliter to Connect Pump/Fans’ RGB Cables If You Have Questions,

1. Please ask for professional help if you don’t know how to install.
2. Make sure you’re working on a power-off PC.
3. If you have any doubt about components list or product itself, please contact your original reseller/retailer/etailer.
4. ID-COOLING is always ready to offer our support. You can find the contact information below.
5. Descriptions are for your reference. Different models may vary in terms of components list.

SHENZHEN BUYEASY CoO., LTD.
www.idcooling.com
support@idcooling.com
idcoaling global
youtube.com/c/idcooling

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>