reolink E1 Outdoor PoE 4K PTZ Security Camera Outdoor Instruction Manual
- June 14, 2024
- reolink
Table of Contents
reolink E1 Outdoor PoE 4K PTZ Security Camera Outdoor
Specifications
- Camera : E1 Outdoor PoE
- Languages : EN/DE/FR/IT/ES
What’s in the Box
- Camera
- Camera Bracket
- Reset Needle
- Pack of Screws
- 1m Network Cable
- Mounting Template
- Quick Start Guide
- Surveillance Sign
Camera Introduction
- Reset Button * Press for more than five seconds to restore the device to default settings.
- Micro SD Card Slot * Rotate the lens to find the reset button and the SD card slot.
- Daylight Sensor
- Spotlight
- Infrared Lights
- Lens
- Status LED
- Built-in Mic
- Speaker
- Network Cable
- Power Cable
Connection Diagram
Before using the camera, please connect your camera as instructed below to finish initial setup.
- Connect the camera to a Reolink NVR (not included) with an Ethernet cable.
- Connect the NVR to your router, and then power on the NVR.
NOTE : The camera should be powered with a 12V DC adapter or a PoE powering device such as PoE injector, PoE switch, or Reolink NVR (not included in the package).
Set up the Camera
- Download and Launch the Reolink App or Client software, and follow the onscreen instructions to finish initial setup.
- Scan to download the Devices Cloud Reolink App.
Install the Camera
Mount the Camera to the Wall
- Pull the button of the security mount and unscrew the bracket to separate the two parts.
- Screw the bracket to the bottom of the camera.
- Drill holes in accordance with the mounting template and screw the security mount to the wall.
- Choose a proper direction of the camera and then align the bracket to the security mount and lock the camera in place by turning anti-clockwise.
NOTE : Use the drywall anchors included in the package if needed.
Mount the Camera to the Ceiling
- Pull the button of the security mount and unscrew the ceiling bracket from the mount.
- Install the bracket to the ceiling.
- Align the camera with the bracket and turn the camera unit clockwise to lock it in position.
Troubleshooting
Camera is Not Powering on
If your camera is not powering on, please try the following solutions
- Check if the power adapter is properly connected.
- Make sure the power source is working.
- Try using a different power adapter or PoE injector.
- If the problem is not solved, please contact Reolink Support.
FAQ
- Q: Can I connect the camera to a PoE switch or PoE injector?
- A: Yes, you can also connect the camera to a PoE switch or PoE injector.
- Q: How do I set up the camera if I am using a Reolink PoE NVR?
- A: If you are connecting the camera to a Reolink PoE NVR, please set up the camera via the NVR interface.
- Q: What is the power source for the camera?
- A: The camera should be powered with a 12V DC adapter or a PoE powering device such as PoE injector, PoE switch, or Reolink NVR (not included in the package).
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
What’s in the Box
Camera Introduction
- Reset Button
- Press for more than five seconds to restore the device to default settings.
- Micro SD Card Slot
- Rotate the lens to find the reset button and the SD card slot.
- Daylight Sensor
- Spotlight
- Infrared Lights
- Lens
- Status LED
- Built-in Mic
- Speaker
- Network Cable
- Power Cable
Connection Diagram
Before using the camera, please connect your camera as instructed below to
finish initial setup.
- Connect the camera to a Reolink NVR (not included) with an Ethernet cable.
- Connect the NVR to your router, and then power on the NVR.
NOTE: The camera should be powered with a 12V DC adapter or a PoE powering device such as PoE injector, PoE switch or Reolink NVR (not included in the package).
-
- You may also connect the camera to a PoE switch or PoE injector.
Set up the Camera
Download and Launch the Reolink App or Client software, and follow the
onscreen instructions to finish initial setup.
On Smartphone
Scan to downl Devices Cloudoad the Reolink App. 
NOTE: If you are connecting the camera to a Reolink PoE NVR, please set up the camera via the NVR interface.
Install the Camera
Mount the Camera to the Wall
For outdoor use, the camera must be installed upside down for better
waterproof performance.
-
Pull the button of the security mount and unscrew the bracket to separate the two parts.
-
Screw the bracket to the bottom of the camera.
-
Drill holes in accordance with the mounting template and screw the security mount to the wall.
-
Choose a proper direction of the camera and then align the bracket to the security mount and lock the camera in place by turning anti-clockwise.
NOTE: Use the drywall anchors included in the package if needed.
Mount the Camera to the Ceiling
Pull the button of the security mount and unscrew the ceiling bracket from
the mount.
Install the bracket to the ceiling. Align the camera with the bracket and turn the camera unit clockwise to lock it in position.
Troubleshooting
Camera is Not Powering on
If your camera is not powering on, please try the following solutions
- Make sure your camera is powered properly. The PoE camera should be powered by a PoE switch/injector, the Reolink NVR or a 12V power adapter.
- If the camera is connected to a PoE device as listed above, connect the camera to another PoE port and see if the camera will power on.
- Try again with another Ethernet cable.
If the problem is not solved, please contact Reolink Support.
Specifications
Software Features
- Audio : Two-way audio
- IR Cut Filter : Yes
General
- Operating Temperature: -10°C to 55°C (14°F to 131°F)
- Size: 84.7×117.8 mm
- Weight: 380g
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ISED Compliance Statements
This Class B digital apparatus complies with Canadian ICES-003.
Simplified EU Declaration of Conformity
Reolink declares that this device is in compliance with the essential
requirements and other relevant provisions of EMC Directive 2014/30/EU and LVD
2014/35/EU.
UKCA Declaration of Conformity
Reolink declares that this product is in compliance with Electromagnetic
Compatibility Regulations 2016 and Electrical Equipment Safety Regulations
2016.
Limited Warranty
This product comes with a 2-year limited warranty that is valid only if purchased from Reolink Official Store or a Reolink authorized reseller.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>