GATOR GALT01 Driver Assist User Guide
- June 14, 2024
- GATOR
Table of Contents
GATOR GALT01 Driver Assist
Product Specifications
- Model: GALT01
- Brand: Gator
- Website: gatordriverassist.com
Product Usage Instructions
Installation
Please follow the steps below to install the GALT01
- Ensure that the vehicle’s engine is turned off.
- Locate a suitable spot on the windshield where you have a clear view of the road ahead.
- Clean the chosen area thoroughly with a glass cleaner to ensure proper adhesion.
- Remove the protective film from the suction cup mount.
- Press the suction cup firmly against the windshield and engage the locking mechanism to secure it in place.
- Attach the GALT01 device to the suction cup mount by aligning the mounting bracket with the slots on the mount and sliding it into place.
- Ensure that the device is securely attached and adjust its position for optimal viewing angle.
Powering On/Off
- To power on the GALT01, simply connect it to a power source using the provided power cable. The device will automatically turn on when power is supplied.
- To power off the GALT01, disconnect it from the power source or turn off the vehicle’s engine.
Basic Operation
The GALT01 is designed to assist drivers with various features. Here are
some basic operations
- To start recording, press the “Record” button on the device or use the corresponding option in the menu.
- To stop recording, press the “Stop” button or use the menu option.
- Use the navigation buttons to navigate through the menu and select different options.
- Adjust settings such as video resolution, date and time, and audio recording preferences in the device’s menu.
- Use the playback feature to review recorded videos directly on the device’s screen.
Maintenance
To ensure optimal performance and longevity of the GALT01, follow these
maintenance guidelines
- Regularly clean the device’s lens with a microfiber cloth to remove dust and smudges.
- Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
- Keep the device away from water or any other liquids.
- Periodically check for software updates on the manufacturer’s website and install them as necessary.
Troubleshooting
If you encounter any issues with the GALT01, refer to the troubleshooting
section of the user manual or contact our customer support for assistance.
Frequently Asked Questions (FAQ)
- Q: Can I use the GALT01 in any vehicle?
- A: Yes, the GALT01 can be used in any vehicle with a windshield. It is important to ensure proper installation and positioning for optimal performance.
- Q: How long can the GALT01 record videos?
- A: The recording time of the GALT01 depends on the storage capacity of the inserted memory card. It can support up to 128GB microSD cards for longer recording durations.
- Q: Can I transfer the recorded videos to my computer?
- A: Yes, you can transfer the recorded videos from the GALT01 to your computer using the provided USB cable or by removing the memory card and using a card reader.
- Q: Does the GALT01 have a built-in GPS?
- A: No, the GALT01 does not have a built-in GPS module. However, it can record the date and time information on the videos based on the system time settings.
For more information on the Gator range go to our website
Please ensure that you have read the product quick start guide and instructions prior to installation and use. Failure to do so may result in the product incorrectly operating or an installation that renders the device unusable.
Product specifications
- Pitch angle : -40° – +40°
- Roll angle : -40° +40°
- Temperature accuracy : ±1°C
- Voltage measurement range : DC 5-30V
- Voltage measurement accuracy : 0.5 V
- Speed precision: <0.36 Km/h
- GPS start time (Cold): 32s (Average)
- GPS start time (Hot): 1s (Average)
- Data refresh rate of GPS : 1s
- Operating temperature : -40°C+80°C
- Power supply : DC 10V-30V
Display
- Elevation Altitude
- Pitch Angle
- Roll Anglel
- Digital Compass
- Speed Meter
- Temperature
- Digital Clock
- Voltage Indicator
- Light Sensor
- Volume Adjustment
- GPS Data Collection
- Speaker
- Measurement Button
- Power Button
- Slot not used
Functions
- (1) (6) Elevation Altitude / Temperature
- Display cycles between elevation altitude and internal temperature every 10 seconds
- (2) (3) Pitch Angle / Roll Angle
- Displays current pitch angle. To reset/zero, press and hold the Power Button whilst the device is on for 3-5 seconds. This is recommended whenever the device is repositioned in the vehicle
- (7) (8) Time / Voltage
- Display cycles between current time (hours/minutes) and voltage every 10 seconds. Correct time is automatically calibrated by GPS
- (5) Speed
- Displays the current speed of the vehicle
- (9) Light Sensor
- Automatically adjusts the brightness of the display relative to outside brightness to reduce glare
- (4) Digital Compass
- Displays vehicle orientation (Automatically calibrated by GPS)
- (11) GPS Data
- Icon will be displayed when a successful GPS connection has been established
- (10) Volume
- Adjust device volume. Each press will cycle up through the values (0-9/ 0 is Mute)
- (13) Measurement
- Adjust device temperature and speed information to C° and Kmh, or F° and Mph. (Refer to page 5)
Installation
- Connect the ACC wire to the ACC power supply of the car, then connect the GND wire to a suitable ground point.
- Position the GPS module in a suitable location on the dashboard in the vehicle to receive optimal signal.
- It is recommended that the display is installed on the centre of the dashboard, close to the windscreen to enable wires to be hidden and ensure a good view for the driver. Install the display using 3M tape after first cleaning the surface.
- After turning on the device for the first time, or after having moved the device, press and hold the power button whilst the device is powered on for 3-5 seconds to reset/zero the pitch and roll angle to ensure that the values are accurate.
Settings
Time Zone
To change the default time zone of the device, press and hold the power button
whilst the device is off. Turn the device on and the current time zone setting
will be displayed on the Speed display (5).
Note : the default time zone is set to GMT.
Press the power button to cycle to the desired value and then turn off the
device. When the device is next powered on, the time zone will be set to the
chosen value.
Measurement
To measurement readings (speed, altitude, temperature) of the device can be
adjusted from metric to imperial.
Note: The device is set to Metric by default.
To change the measurement type, press and hold the measurement button down by inserting a needle point tool in the measurement button hole (13) whilst the device and vehicle ignition are switched off. Then switch on the vehicle ignition. A ‘C’ (Metric) or ‘F’ (Imperial) will be displayed on screen. To cycle between the options, turn off the ignition and press and hold the measurement button down to display the next option. Once the desired option has been set, turn on the device.
Attention
- Due to the affect of the GPS signal, the speed may be delayed, and at the same time, the speed, electronic compass and elevation altitude can’t be displayed normally.
- The GPS signal has a great influence on the elevation altitude, so the lack of GPS signal is a little bigger when it’s obstructed by surroundings (ie buildings, forest).
- The temperature sensor is inside the concentrator, so the indoor temperature is dependent on its position inside the vehicle.
Technical assistance
If you need assistance setting up or using your Gator product now or in the
future, call Gator Support Australia.
- TEL : 03 – 8587 8898
- FAX : 03 – 8587 8866
- Mon-Fri 9am – 5pm AEST
Please retain this user guide for future reference
This manual is considered correct at time of printing but is subject to
change. For latest manuals and updates refer to the website.
Copyright © 2022 by TDJ Australia
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>