reolink Video Doorbell Camera Wired 2K WiFi with Chime Instruction Manual

reolink Video Doorbell Camera Wired 2K WiFi with Chime

Product Information

Specifications

• Model: Reolink Video Doorbell WiFi / PoE
• Power Source: PoE or Power Adapter
• Micro SD Card Slot: Yes
• Built-in Features: Mic, Lens, Daylight Sensor, Status LED
• Reset Button: Yes
• Wiring: Included

Hardware Features

• Field of View: 133.6° Horizontal, 97.3° Vertical, 180.4°
• Diagonal Dimension: 133 x 48 x 23mm
• Weight: 96g

Doorbell Introduction **

**

The Reolink Video Doorbell is available in two versions: WiFi and PoE. Both versions have built-in features such as a microphone, lens, daylight sensor, status LED, micro SD card slot, reset button, and wiring.

Video Doorbell WiFi

WiFi Version
The WiFi version of the doorbell also includes a LAN port for wired connection.

PoE Version
The PoE version of the doorbell requires a PoE Switch/Injector or Reolink PoE NVR for power.

Set up the Doorbell

Set up the Doorbell on Phone

1. Step 1: Scan to download the Reolink App from the App Store or Google Play Store. If you already have the app, make sure it is up to date.
   NOTE: If the Reolink App is already existed, please check if it is the newest; if no, please update it.
   

2. Step 2: Power on the video doorbell.

   • PoE Version: Connect the doorbell to a PoE Switch/Injector or Reolink PoE NVR.
   • WiFi Version: Connect the power cable to the screws on the back of the doorbell and power it on with the power adapter. NOTE: Make sure the Y-shape plugs are separate from each other.

3. Step 3: Launch the Reolink App and click the “+” button in the top right corner to add the doorbell. Scan the QR code on the doorbell to complete the setup.

4. Step 4: Follow the onscreen instructions to finish the initial setup.

Set up the Doorbell on PC (Optional)

1. Step 1: Download and install the Reolink Client from the official website.
2. Step 2: Power on the video doorbell.
3. Step 3: Launch the Reolink Client, click the “+” button, and input the UID number of the doorbell to add it.
4. Step 4: Follow the onscreen instructions to finish the initial setup.

Set up the Chime

1. Step 1: Plug in the Chime and press the button on your doorbell.
2. Step 2: Follow the onscreen instructions to finish the initial setup.

Note: By default, the chime is synchronized with the doorbell. If you want to use two or more chimes for one doorbell, you need to synchronize them manually.

1. Power off the chime.
2. Power on the chime with the setting button pressed to turn on the pairing mode. Keep pressing the button for 5 seconds until the chime  status LED is on.
3. Press the doorbell button once. The chime will be successfully paired if its status LED flashes twice and it beeps twice.

Install the Doorbell

To install the Reolink Video Doorbell PoE:

1. Step 1: Put the mounting hole template on the wall by the door and drill holes as shown.
2. Step 2: Install the mounting plate using the long screws provided through the two holes.
3. Step 3: Connect the doorbell to the mounting plate.  Run the Ethernet cable through the mounting plate and the hole on the wall to connect it to the doorbell, then attach the doorbell to the plate.
4. Step 4: The doorbell is powered by connecting the other end of the Ethernet cable to a PoE device.

Reolink Video Doorbell WiFi

• Step 1: Put the mounting hole template on the wall by the door and drill holes as shown.
• Step 2: Install the mounting plate using the long screws provided through the two holes.

• Step 3: Run the power adapter through the mounting plate and the hole on the wall to connect it to the doorbell, then attach the doorbell to the plate.
• Step 4: Plug the power adapter into a socket near the door. Use the long power extension cable if the socket is too far away from your doorbell.

NOTE: Reolink Video Doorbell PoE&WiFi can also be powered by the existing doorbell wiring system. In such case, you are required to first bypass the existing mechanical chime with the jumper cable to get sufficient power. Without sufficient power, the doorbell may restart and has an unstable connection, and the mechanical chime may vibrate and generate noise. Use the extension cable to extend the length of  the existing power cable for the doorbell, as shown below. After the  installation, the existing mechanical chime will not ring anymore.

If you need to adjust the angle of the doorbell, you can use the wedge provided. (The Reolink Video Doorbell PoE is taken as an example)

• Step 1: Put the mounting hole template on the wall and drill holes as shown.
• Step 2:  Install the wedge using the screws provided through the two holes. Ensure that the notched side of the wedge is facing outside.
• Step 3: Screw the mounting plate to the wedge.
• Step 4: Run the Ethernet cable through the wedge and mounting plate, and  attach the doorbell to the plate.

Synchronization with Chime

1. Power off the chime.
2. Power on the chime with the setting button pressed to turn on the pairing mode. Keep pressing the button for 5 seconds until the chime status LED is on.
3. Press the doorbell button once. The chime will be successfully paired if its status LED flashes twice and it beeps twice.

FAQ

Q: Does the Reolink Video Doorbell come with a power adapter and power extension cable?
A: The Reolink Video Doorbell PoE version does not come with a power adapter and power extension cable. The WiFi version includes a power adapter.

Q: Can I use multiple chimes with one doorbell?
A: Yes, you can use multiple chimes with one doorbell. However, you need to synchronize them manually.

What’s in the Box

NOTE: The Reolink Video Doorbell PoE doesn’t come with a power adapter and power extension cable.

Remove the Doorbell

If you want to remove the Doorbell from the mounting plate, you may use the reset needle to poke the bottom.

Notification of Compliance

FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:
this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC RF Exposure Warning Statements
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

Simplified EU Declaration of Conformity
Reolink declares that the WiFi camera is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, the PoE camera is in compliance with Directive 2014/30/EU.

Correct Disposal of This Product

• This marking indicates that this product should not be disposed with other household wastes. throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Limited Warranty
This product comes with a 2-year limited warranty that is valid only if purchased from Reolink Official Store or a Reolink authorized reseller.
NOTE: We hope that you enjoy the new purchase. But if you are not satisfied with the product and plan to return, we strongly suggest that you reset the camera to factory default settings before returning.

Terms and Privacy
Use of the product is subject to your agreement to the Terms of Service and Privacy Policy at reolink.com. Keep out of reach of children.

End User License Agreement
By using the Product Software that is embedded on the Reolink product, you agree to the terms of this End User License Agreement (“EULA”) between you and Reolink.

ISED Statements
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency Exposure Statement for IC
The device has been evaluated to meet general RF exposure requirements. The device can be used in mobile exposure conditions. The min separation distance is 20cm.

OPERATING FREQUENCY (For WiFi Version)
(the maximum transmitted power)

• 2412MHz — 2472MHz (19dBm)
• 5150MHz — 5350MHz (18dBm)
• 5470MHz — 5725MHz (18dBm)

Technical Support
If you need any technical help, please visit our official support site and contact our support team before returning the products.

References

• Reolink Official: Security Cameras and Systems for Home & Business

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>