dals SMWLCT Smart Wall Control Installation Guide
- June 6, 2024
- dals
Table of Contents
SMWLCT Smart Wall Control
Installation Guide
MODEL | VOLTAGE |
---|---|
SM-WLCT | 120V |
“Works with Dais Connect products only. However, Dais Connect PRO devices are only compatible if linked to the hub.
ITEMS INCLUDED IN THE BOX
- Device
- Mounting hardware
FEATURES
All 4 buttons are fully customizable in-app.
For example, you can switch your smart lights On/Off, create scenes, select
colors, control groups, and more!
WARRANTY
DALS offers a 5-year warranty from the date of purchase which covers repairs
or replacements of defective parts of the housing, optics, and electronics.
To contact DALS customer service call 1 877 430 1818 or send an e-mail to
info@dals.com.
Installation guide
BEFORE YOU START
BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER OFF USING THE
CIRCUIT BREAKER.
Instructions pertaining to a risk of fire, electric shock, or injury to
persons. Installation must be done according to local electrical codes.
Installation should be done by a certified electrician.
This class B digital apparatus complies with Canadian ICES-003. This digital
apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus as set out in the Radio Interference Regulations of the
Canadian Department of Communications.
CONNECTION DETAILS
FCC COMPLIANCE
SM-WLCT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
-
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, human proximity to the antenna shall not
be less than 20cm (8 inches) during normal operation.
IC COMPLIANCE
This device complies with Industry Canada’s license-exempt RSS. Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
ISED RF Exposure statement
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
ISED radio frequency exposure limits, human proximity to the antenna shall not
be less than 20cm (7.9 inches)during normal operation.
1 877 430 1818
www.dals.com
Download the free Dais Connect app
INS_SM-WLCT_REV3