B Q 6FT Pre Lit Christmas Tree Installation Guide
- June 16, 2024
- B Q
Table of Contents
B Q 6FT Pre Lit Christmas Tree
Product Information
Specifications
- Product Type: Artificial Tree
- Usage: Decoration
- Assembly: No tools required
- Power Source: Electric
- Material: Metal stand, Flame retardant branches
Product Usage Instructions
Assembly and Installation
Before starting the assembly, please read and follow all the instructions
and warning tags included with the tree.
- Choose an appropriate location for your tree.
- Remove all packaging materials such as cardboard or plastic.
- Take out the metal tree stand and unfold it into an X shape.
- Insert the tapered end of the tree bottom into the tree stand.
- Tighten the three screws on the stand to secure the tree.
- If your tree has multiple sections, insert the middle tree section into the tree bottom and push it down into position. (Note: This step does not apply to trees with only 2 sections)
- Insert the tree top into the middle tree section and push it down into position.
- Connect the strings with power by finding the power supply cord on the bottom section. If there is no power supply cord, carefully connect the plug to end-connector by matching A to A and B to B.
- Gently lower all main branches on tree sections, taking care not to place unnecessary pressure on the brackets when assembling.
- Straighten and separate all branch tips, then bend them slightly upward for desired fullness.
- Plug the tree lights into a power outlet.
Storage Tips
- Disconnect power from the lights.
- Remove all decorations from the tree.
- Starting from the top, carefully remove branches and press the tips back up against the stem.
- Place the branch sections back into the carton, with the longest one on the bottom.
- Store the product in a cool, dry location protected from sunlight.
FAQ
-
Q: Can I use candles on the tree?
A: No, candles should not be used on the tree. Use only the included mini lights for safety. -
Q: Can children play with this product?
A: This product is for decoration use only and should not be used as a toy. Keep it out of reach of small children. -
Q: What should I do if I find cut or pinched insulation on the wires?
A: Discard any light sets with cut or pinched insulation to ensure safety. -
Q: Is this tree flame retardant?
A: Yes, the branches of this tree are flame retardant for added safety.
ASSEMBLY AND INSTALLATION INSTRUCTIONS
WARNING – Risk of Fire and Electric Shock:
- Read all instructions and warning tags included with this tree.
- Do not place near barbeques, candles, outdoor heaters, or other similar sources of heat.
- Do not install near pools, fountains, tubs, sinks, or other areas of standing water that the tree may fall or blow into.
- Disconnect tree’s light sets from power before starting.
- Keep wires clear of being pinched or cut during assembly or installation. Discard sets with cut or pinched insulation.
- Do not press or grasp bulbs during assembly or installation.
- Make sure final assembly stable enough to hold the tree upright.
- Do not use candles on tree. Use only with the included mini lights.
- Do not overload extension cords or power strips.
- Always fully insert electrical plugs into a receptacle.
- This product is for decoration use only. Not to be used by children as a toy. Keep out of reach of small children.
No tools required for assembly.
Before You Start
- Decide on an appropriate location for your product, please read assembly and Instruction Procedure carefully..
- Retain the instructions for future use and save the carton for storing your tree.
Assembly and Instruction Procedure
Every carton should contain a top section and a bottom section (larger trees
include middle sections). This will depend on what model you have purchased.
Also included is a metal base . Remove all Packaging (i.e. cardboard or
plastic) before beginning.
- Choose a location where the tree is to be displayed. Take out the tree stand. Metal stand unfold as “X” shaped as Figure1, place it on a flat surface.
- Insert the pole with tapered end of the tree bottom into the tree stand and tighten the 3 screws on the stand.
- Insert the middle tree section into the tree bottom and push down into position. (Note: This does not apply to trees with only 2 sections)
- Insert the tree top into the middle tree section and push down into position as Figure 2.
- CONNECTING THE STRINGS WITH POWER: Please find the power supply cord on the bottom Section. If there is no power supply cord, follow the method below: Carefully connecting the plug to end-connector by A to A, and B to B.
- Gently lower all main branches on tree sections (figure 3).Take care not to place unnecessary pressure on the brackets when assembling. The branches on your tree can be adjusted to give tree the desired amount of fullness. For best results, straighten and separate all branch tips, then bend them slightly upward (figure 4)
- Plug tree lights into a power outlet.
YOUR TREE IS NOW READY TO ENJOY!
Storage Tips:
- Warning – Disconnect power from the lights.
- Remove all decorations.
- Starting from the top, carefully remove branches. Press the tips back up against the stem.
- Place the branch sections back into the carton, putting the longest one on the bottom.
- Store The Product In a Cool, Dry Location Protected From Sunlight,
Where The Temperature Does Not Exceed 40˚.
Flame Retardant
SAVE THESE INSTRUCTIONS
Documents / Resources
| B Q
6FT Pre Lit Christmas
Tree
[pdf] Installation Guide
6FT Pre Lit Christmas Tree, Pre Lit Christmas Tree, Lit Christmas Tree,
Christmas Tree, Tree
---|---