The ONE TRD1 Roll Up Drum User Manual
- June 3, 2024
- The ONE
Table of Contents
The ONE TRD1 Roll Up Drum
Packing List
Introduction
Button Description
Functions
This section contains information on how to use the product and how to prepare for performance. Please read this section carefully before starting to use it.
Install the battery
This product is equipped with lithium battery, which must be installed in the
battery compartment before use.
- Open the back cover of the battery compartment;
- Install the battery according to the positive and negative poles;
- Close the back cover of the battery compartment.
Note: When the battery is fully charged, it can be used continuously for 2-3 hours depending on the state of use.
Power Supply
In addition to battery power supply, you can also use the power adapter to
supply power directly, or use the power adapter to charge the lithium battery.
- Connect the USB end of the power cable to the 5V DC plug;
- Connect the 5V DC plug to the 220V power socket;
- Connect the Type-C end of the power cable to the power socket of the Module.
External connection
Connecting pedals
This product supports an external hi-hat pedal and kick drum pedal, connecting
the pedals to enhance your drumming experience.
Note: When the pedal is not connected, the hi-hat pad defaults to a closed cymbal sound. After the pedal is connected, the hi-hat drum pad defaults to an open cymbal sound. Press the pedal and strike the hi-hat drum pad to produce a closed cymbal sound.
- Connecting headphones
When headphones are plugged into the jack, the speakers will be cut off automatically, and the drums can only be heard from the headphones.
Device Connection
Support wired or Bluetooth connection. Support Android 7.0+, iOS10.0 and above
mobile phones or tablets.
- Cable connection
Bluetooth Connection
The Bluetooth connection needs to be done in the app “Instagram”, and the
steps are as follows:
Note: I he first connection requires allowing instaDrum to use Bluetooth .
Specifications
Item|
---|---
Model| TRD1
Specs| 5 drums and 4 cymbals
Songs| 10
Drum kits| 6
Accompaniment| 10
External pedal| Supported
Connection method| Bluetooth, cable
Recording| Supported
Size|
Weight| 2.2 lbs
Troubleshooting
Notice
- device to input audio sources.
- Please do not place the electronic drum in overheated or dusty places to work.
- Please keep a distance from strong electromagnetic devices such as radios and TV sets to avoid interference.
- Do not place heavy objects on the electronic drum.
- Please do not place this electronic drum in a humid or overheated place.
- Please do not over fold and squeeze the electronic drum.
- Do not put sharp objects with this electronic drum.
Warranty Card
Warranty Type | Warranty Period |
---|---|
Drum machine: Electronic drum cover, module | One year |
Other accessories: Pedal, battery, data cable, audio cable, power adapter | Six |
months
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interfer-ence received, including
interference that may cause undesired operation.
FCC RF Radiation Exposure Statement
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordancewith the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipmentdoes cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CONTACT US:
- Tel.: 833-970-2670 (US)
- E-mail: Support@theonemusic.com
- Web: www.theonemusic.com
- Note: This product will be constantly updated and optimized. The manual may not be synchronized with the product update in time. Please understand.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>