PINERFTR B0C1TZ6YHW 68 Inch Phone Tripod and Camera Stand User Manual
- June 12, 2024
- PINERFTR
Table of Contents
68″
TRIPOD
PRODUCT
MANUAL
Overview
Package Contents
| (1) | Tripod Stand *1 |
|---|---|
| (2) | Phone Holder *1 |
| (3) | Bluetooth Remote 1 |
| (4) | User Manual +1 |
Product parameters
| Model: | TPNO1 |
|---|---|
| Folded length: | 47.5cm/18.7 in |
| Extended length: | 170 cm |
| Phone holder width: | 5.6–9.8cm/2.2-3.8in |
| Weight: | 220z |
| Remote Battery: | CR2032 |
| Bluetooth version: | Bluetooth 5.0 |
| Compatible phones: | 10S 5.0, Android 4.3 and above |
| Remote distance: | <10 m |
Product Size
Instructions
How to Use Bluetooth Remote
Please install the battery with the positive electrode facing up
Step1 Turn on the side switch and the blue indicator light will begin
flashing.
Step2 Turn on the phone Bluetooth and enter the Bluetooth etting interface.
Step3 Find ‘AB Shutter3″ and press “AB Shutter3”. The process may take up to
3 seconds.
Step4 Open the Camera APP on the phone and press button of the Bluetooth
remote to take photos.
How to use the Phone Tripod?
- Loosen the tripod locking knob at the bottom, press the tripod down to the desired angle (the larger the opening angle, the more stable it is), and then lock the tripod locking knob to make it is firmly supported on a flat surface.
- Turn the locking knob counterclockwise to loosen it, adjust the tripod to the appropriate height, then turn the locking knob clockwise to lock it.
- The PTZ bearing board is designed with adjustable angles, you can adjust the angle of the PTZ bearing board as required.
How to Use the Phone Holder?
- Align the screw holes of the phone holder with the 1/4 screw of the head, turn the head and tighten to fix the phone holder.
- Loosen the knob on the top of the phone holder to adjust the width of the clip.
- Loosen the knob on the back of the phone holder to adjust the phone clip to horizontal or vertical.
**** Battery Statement
| 1. The use of unapproved or incompatible batteries may cause fire,
explosion or other hazards.
---|---
| 2. Do not expose the battery to high temperature or around heating devices,
such as sunlight, heaters, microwave ovens, ovens or water heaters. Overheat-
ing of the battery may cause an explosion.
| 3. Do not throw the battery into the fire, otherwise it will cause the
battery to catch fire and explode.
****| 4. Please dispose of batteries according to local regulations, and do
not dispose of batteries as household waste.
| 5. Do not allow children or pets to swallow the battery to avoid injury.
**** Safety and Warranty
- Be careful not to pinch your hands when opening or closing the tripod.
- Do not place the tripod near heat sources or exposed fire sources, such as electric heaters, microwave ovens, ovens, water heaters, stoves, candles or other places that may generate high temperatures.
- This tripod and its accessories may contain some small parts, please keep the product and its accessories out of the reach of children. Children can inadvertently damage its accessories, orswallow small parts that could cause choking or other hazards.
- The tripod should not be used near water, such as a bathtub, swimming pool, faucet or basin, which may cause risks.
- Avoid placing the tripod in water, and do not use it close to chemicals or corrosive liquids and gases.
- The Bluetooth remote control may be interfered by external sources such as transformers, motors or other electronic devices. Keep these disturbed places as far away as possible during use.
- Use this machine only for its intended use as described in this manual.
- Close supervision is necessary when this appliance is used by or near children, invalids or disabled persons.
- We strive to build our products with the highest attention to detail and craftsmanship. However, sometimes there may be occurrences of defect. We are happy to offer a 24-monthhassle-free warranty to all our products as we continue to support our customers and make amazing products.Please contact us if you have any questions about our devices.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
Disclaimer
Please using the item under the guide of the caution/note.
Do not use the item in situations or with equipment that requires extremely
high reliability or safety, such as the following:
– Medical equipment that directly affects human life.
– Equipment that may result in personal injury (such as equipment directly
related to the operation and control of aircraft, ships, railroads,
elevators, etc., or equipment that maybe subject to constant vibration, such
as automotive and marine equipment).
The product is not for use in high-risk activities. The product is not
designed or intended for use in hazardous environments requiring fail-safe
performance, or for use in any circumstance in which the failure of the
product could lead directly to death,
personal injury, severe physical or property damage, or that would affect the
operation or safety of any medical or life support device (collectively,
“High-Risk Activities”).
We expressly disclaims any express or implied warranty of fitness for High-
Risk Activities. We does not authorize use of any product in any High-Risk
Activities. Any such use is improper and is a misuse of the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>