aqprox APPKVHDMI2P 2 Ports HDMI KVM Switch User Guide
- June 8, 2024
- aqprox
Table of Contents
aqprox APPKVHDMI2P 2 Ports HDMI KVM Switch
Product description
The APPKVHDMI2P is a device that allows you to use two PCs with one monitor, keyboard and mouse. The maximum supported resolution is 4K/30Hz (3840×2160) and the transmission image quality is very clear and lag-free. Three USB 2.0 ports are included for connectivity.
Safety and maintenance instructions
- Read the user guide before using the product.
- Do not use abrasive solvents to clean the product.
- Do not expose the product to extremely high or low temperatures, as this will shorten the life of the electronic devices.
- Do not expose the product to contact with sharp objects, as this will cause scratches and damage.
- Avoid dropping the product. The internal electronic board may be damaged.
- Do not attempt to disassemble the product as this may damage it.
- Do not insert objects into its holes, danger of short-circuit.
System requirements
- 2 PCs with HDMI output
- Monitor with HDMI input
- HDMI cable
- USB Keyboard / Mouse
Installation
Connect one of the supplied HDMI/USB cables between the PC1 input of the APPKVHDMI2P and the HDMI output of your first PC and connect the end with the USB connector to a USB 2.0 port on the PC. Connect one of the supplied HDMI/USB cables between the PC2 input of the APPKVHDMI2P and the HDMI output of your second PC and connect the end with the USB connector to a USB 2.0 port on the PC. Connect an HDMI cable (not supplied) between the HDMI output of the APPKVHDMI2P and the HDMI input of your monitor. Connect the supplied External Controller to the Control input of the APPKVHDMI2P. Connect your keyboard, mouse and USB device to the various USB inputs of the APPKVHDMI2P.
Connection Diagram
Technical Support
For more information about the installation and configuration of this product, please visit our website www.approx.es or send an e-mail to soporte@approx.es.
Getting started
Once everything is connected as shown in the connection diagram, switch on both PCs and once the loading of the operating system is finished, you can select PC1 or PC2.
- A) Press the manual button on the APPKVHDMI2P to select one PC or the other.
- B) Press the button on the external controller to select one PC or the other.
Note: Until the corresponding PC indicator lights up, you will not be able to use it.
This product supports gain adjustment: user can adjust the gain to show the best effect when it shows snowflake or does not display correctly, press the manual button of APPKVHDMI2P for 3 seconds, the product is dropping, adjust the gain once.
Recycling
AEE REI-RAEE 5548 In this manual, the container (WEEE) symbol indicates that the product is subject to the European directive 2002/96/EC, electrical and electronic products, batteries, and batteries and other accessories must necessarily be subject to a selective collection. At the end of the life of the device, make use of the recycling bins. This gesture will help reduce the health risks and preserve the environment. Municipalities and distributors, will provide essential details on recycling your old device. If this device carries an internal battery, it must be removed and deposited separately for proper management.
Importado por / Imported by: APPROX IBERIA S. L. CIF: B-91202499 Soporte técnico / Technical support: soporte@approx.es El contenido de esta guía de usuario puede tener errores tipográficos The content of this user’s guide is under tipographycal errors Le contenu de ce guide utilisateur peut avoir des erreurs typographiques
References
- Approx Iberia - Approx
- about.es - This website is for sale! - About Resources and Information.
- Approx Iberia - Approx
- Inicio - PRIM'X - PRIM'X