BORMANN BWR5190 900kg Manual Worker User Manual

BORMANN BWR5190 900kg Manual Worker

• The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
• Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
• To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.

Safety instructions

1. Never overload the product!
2. This winch is designed for pulling applications and should never be used for lifting objects!
3. Never put your hand or any other part of your body near the gear, rim and wire rope. Always wear gloves when using the winch.
4. In case a problem occurs, never try to repair or disassemble the winch. Deliver the winch to a certified technician in case of malfunction.
5. When replacing the wire rope, make sure that the end of the wire rope comes through the 4 holes located on the side of the rim, and tie a knob to weld the end tip of the wire rope in order to prevent the cable from coming out.
6. Use grease to lubricate the axis and gears before storing the winch for a long period.

Main Instructions

1. Ratchet switch – The winch has 3 available position settings: The higher position is used for pulling objects (increasing tension/winding), the lower position is used for releasing the wire rope (decreasing tension/unwinding), the middle position is used for both pulling and releasing actions but can only be used when the winch is unloaded. When the winch is under load, always hold the crank handle tightly if you want to switch the position setting.

2. Before use, install the winch on a firm and flat surface. To install it, set the ratchet switch to the middle position and pull the wire rope out and make sure that there at least three rounds are winded around the shaft.
   Use at least 3 sets of 3/8″ bolts and locking nuts, following a triangle pattern, to fix the base on the surface. Use an extra metal piece or a block hardwood board if necessary.

3. Then install the crank handle to the axis bolt using a nut.

4. Set the ratchet switch on the higher position and turn the crank handle clockwise to wind the wire rope. Set the ratchet switch on the lower position and turn the crank handle counter-clockwise to unwind the wire rope.

Description of main parts

1. Crank Handle
2. Ratchet Switch
3. Axis Bolt
4. Base
5. Rim

DISPOSE OF PACKAGING RESPONSIBLY

DO NOT DISPOSE OF ELECTRICAL GOODS IN HOUSEHOLD WASTE

Documents / Resources

| BORMANN BWR5190 900kg Manual Worker [pdf] User Manual
028505, BWR5190, 900kg Manual Worker, BWR5190 900kg Manual Worker, Manual Worker, Worker
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>