SMITH S3E-V Heavy Duty Backpack Sprayer Instructions

SMITH S3E-V Heavy Duty Backpack Sprayer

Product Information

Specifications

• Product Name: Smith Performance Sprayers Heavy-Duty Backpack Sprayer S3E-V
• Version: 2.0 (September 2023)
• Product Code: NPS01935-UNIT
• Description: SPS STANDARD CHARGER 0.6A AU (SPS-183530)

Product Usage Instructions

Charging the Battery
To charge the battery, follow these steps:

1. Connect the SPS STANDARD CHARGER 0.6A AU (SPS-183530) to a power source.
2. Attach the charger to the SPS LI-ION BATTERY 2.0Ah (SPS-183411) or the SPS LI-ION BATTERY 4.0Ah (SPS-183412) depending on your preference.
3. Wait for the battery to fully charge. The charging time may vary depending on the battery capacity.
4. Once fully charged, disconnect the charger from the power source and remove it from the battery.

Filling the Tank
To fill the tank with liquid, follow these steps:

1. Remove the SPS TANK CAP (INCLUDES CHECK SEAL) (SPS-185212) from the tank.
2. Pour the desired liquid into the tank.
3. Ensure the SPS FILTER BASKET (INCLUDES GASKET) (SPS-185214) is properly inserted in the tank.
4. Screw the SPS TANK CAP (INCLUDES CHECK SEAL) (SPS-185212) back onto the tank.

Using the Sprayer
To use the backpack sprayer, follow these steps:

1. Put on the SPS SHOULDER HARNESS (SPS-183420) and the SPS PADDED WAIST BELT (SPS-185029) for comfortable carrying.
2. Hold the SPS LANCE ASSEMBLY 21 SS (SPS-182112) in one hand and the SPS CONTROLS MODULE (SPS-184822) in the other.
3. Press the trigger on the SPS CONTROLS MODULE (SPS-184822) to start spraying.
4. Adjust the spray pattern and intensity using the SPS BRASS NOZZLE KIT (SPS-181870) or the SPS HIGH-PERFORMANCE FOAMING NOZZLE (SPS-185138) depending on your needs.

FAQs

Q: How long does it take to charge the battery?
A: The charging time may vary depending on the battery capacity. It is recommended to refer to the specific battery model for accurate charging times.

Q: Can I use a different nozzle with this sprayer?
A: Yes, you can use the SPS BRASS NOZZLE KIT (SPS-181870) or the SPS HIGH- PERFORMANCE FOAMING NOZZLE (SPS-185138) for different spray patterns and intensities.

SPARE PARTS

SMITH PERFORMANCE SPRAYERS HEAVY-DUTY BACKPACK SPRAYER S3E-V

Flextool

• 1956 Dandenong Road, Clayton VIC 3168, Australia
• Phone: 1300 353 986
• flextool.com.au
• ABN 80 069 961 968

This manual summarises our best knowledge of the product based on the information available at the time of publication. You should read this manual carefully and consider the information in the context of how the product will be used. Our responsibility for products sold is subject to our standard terms and conditions of sale.

DISCLAIMER:
Any advice, recommendation, information, assistance or service provided by us in this manual is given in good faith and is believed by us to be appropriate and reliable. However, any advice, recommendation, information, assistance or service provided by us is provided without liability or responsibility PROVIDED THAT the foregoing shall not exclude, limit, restrict or modify the right entitlements and remedies conferred upon any person or the liabilities imposed upon us by any condition or warranty implied by Commonwealth, State or Territory Act or ordinance void or prohibiting such exclusion limitation or modification. The product can be expected to perform as indicated in this manual so long as operation and operational procedures of the individual products are followed as recommended in this manual.

Design and technical specifications may be subject to changes.

© This publication is copyright. All rights are reserved. Flextool is a registered trade mark of Parchem Construction Supplies Pty Ltd. Smith Performance Sprayers is a trade mark.

FOR MORE INFORMATION
CONTACT US ON 1300 353 986 OR VISIT flextool.com.au.

References

• Concrete Equipment and Tools - From Site Preparation to Surface Preparation | Flextool

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>