POWER SMITH PWLR030FM Rechargeable LED Work Light Instruction Manual
- June 1, 2024
- POWER SMITH
Table of Contents
POWER SMITH PWLR030FM Rechargeable LED Work Light
Product Information
Specifications
- Model #: PWLR030FM
- Brightness: 3000/1500/600 Lumens
- Runtime: 2/4/8 Hours
- Colour Temperature: 5000K Bright White
- Battery: 3.7V, Lithium-Ion, 10.0 Ah
- USB Power Output: 5V, 2A
- Recharge Time: 3-6 Hours
- IP Rating: 44
- Net Weight: 3.2 lb.
Product Overview
The LED Work Light features a carrying grip, work light head, LEDs, frame,
adjustable joints, base, clear cover, on/off & mode switch, USB power output,
charging ports, battery power indicator, magnetic feet, and USB-C charging
cables.
Unpacking Contents
The package includes an LED Work Light, USB-C Charging Cable, and Manual.
Important Safety Instructions
Read and understand all warnings, cautions, and operating instructions
before using the equipment to avoid electric shock, fire, or personal injury.
Follow the specific applications for which the work light was designed.
Operation
Adjusting the Work Light
The work light can be unfolded to a standing position or folded flat for
storage. Avoid overforcing the turn angle between the frame and base; refer to
the marks on the adjustable joint for turning limits.
Charging the Light
- Ensure the light is turned off.
- Lift the clear cover to access the charging ports.
- Plug the USB-C end of a charging cable into one of the ports and connect the USB end to a standard 5V USB power output. For faster charging, use both ports simultaneously.
- The battery power indicator lights will display the battery level, with one light flashing during charging.
FAQ (Frequently Asked Questions)
-
Q: How do I know when the battery is fully charged?
A: The battery power indicator lights will stop flashing and remain steadily lit when the battery is fully charged. -
Q: Can I leave the work light plugged in after it’s fully charged?
A: It is recommended to unplug the work light after it’s fully charged to prevent overcharging and extend battery life.
PRODUCT OVERVIEW
- Carrying Grip
- Work Light Head
- LEDs
- Frame
- Adjustable Joints
- Base
- Clear Cover
- On/Off & Mode Switch
- USB Power Output
- Charging Ports
- Battery Power Indicator
- Magnetic Feet
- USB-C Charging Cables
SPECIFICATIONS
- Model # …………………… …….. PWLR030FM
- Brightness ………………………. 3000/1500/600 Lumens
- Runtime ………………………….. 2/4/8 Hours
- Color Temperature ……………. 5000K Bright White
- Battery …………………………… 3.7V, Lithium-Ion, 10.0 Ah
- USB Power Output ……………. 5V, 2A
- Recharge Time ………………… 3-6 Hours
- IP Rating …………………………. 44
- Net Weight ………………………. 3.2 lb.
UNPACKING CONTENTS
Important! Due to modern mass production techniques, it is unlikely the
product is faulty or that a part is missing. If you find anything wrong, do
not operate the product until the parts have been replaced or the fault has
been rectified. Failure to do so could result in serious personal injury.
CONTENTS IN PACKAGE
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
-
Always unplug the charger/adaptor from the light and power source when not in use.
-
Do not look directly at the lighted lamps to avoid eye injuries.
-
Always keep the work light away from any flammable surface or materials.
-
Always check damaged or worn-out parts before using the work light. Broken parts will affect the work light operation. Replace or repair damaged or worn parts immediately. If repairs are needed, consult a professional electrician.
-
Do not use a pressure washer to clean this product.
-
Do not modify the work light in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the work light was designed.
-
Store work light in a secure place out of the reach of children. Inspect it for good working condition prior to storage and before re-use.
WARNING: This LED light is powered by a Lithium-ion battery. Lithium-ion batteries are small, compact, and ideal for providing long-lasting power to this product. However, they must be used and charged properly. Improper use can result in serious injury, fire, or death.
CAUTION: This product comes with a battery installed internally. Do not attempt to remove the battery from the product. -
Do not place this lithium-ion battery-powered product in fire or apply heat to it.
-
Do not apply strong impact or shocks to this lithium-ion battery-powered product.
-
Do not allow the lithium-ion battery to get wet.
-
Do not leave this lithium-ion battery-powered product in direct sunlight, or use or store it inside cars in hot weather. Doing so may cause the battery to generate heat, rupture, or ignite. Using the battery in this manner may also result in a loss of performance and a shortened battery life.
-
NEVER THROW WATER ON A BURNING LITHIUM-ION BATTERY! If a lithium-ion battery does catch on fire, it will burn even more violently when in contact with water.
-
Store the product at temperatures between 41°F and 77°F (5°C and 25°C).
-
Properly dispose of all batteries at a recycling center or per local code. More information regarding battery disposal in U.S. and Canada is available at; http://www.rbrc.org/index.html, or by calling 1-800-822-8837 (1-800-8BATTER).
OPERATION
ADJUSTING THE WORK LIGHT
This work light comes fully assembled right out of the box. It can be unfolded
to a standing position or folded flat for storage.
NOTE: The maximum turn angle between the frame and base is limited. There are marks on the adjustable joint (5) showing the turning limits. Do not over- force it when unfolding the light.
CHARGING THE LIGHT
NOTE: The light features two USB-C ports (10) that can each function as a
charging port. Utilizing both ports simultaneously will expedite the charging
process.
- Make sure the light is turned Off.
- Lift the clear cover (7) to access the charging ports (10).
- Plug the USB-C (small) end of a charging cable into one of the charging ports, and connect the USB end to a standard 5V USB power output. To speed up the recharging process, also connect the second USB-C charging port to a separate USB power output.
- The battery power Indicator lights (11) will illuminate to display the battery power level. One of the indicator lights will be flashing if charging is in progress.
- When charging is complete, all three indicator lights will be solid.
Switch Button
Press the switch button (8) to turn the light On. Additional presses cycle
through the light settings in the following sequence.
- High – Medium – Low – Off
If the light remains on any setting for more than 10 seconds, the next press of the switch button will power the light Off.
BATTERY POWER INDICATOR
The light features a battery power indicator (11). It consists of three
lights. To indicate the battery power level, power the light On, more
illuminated lights indicate more battery power remaining.
USB POWER Output
The light has a USB power output (9) to charge other portable devices using
the appropriate USB cable.
MAGNETIC BASE
The base (6) features two magnetic feet (12) designed for attaching the light
to metal surfaces.
MAINTENANCE
WARNING: Always make sure the light is unplugged and completely cool before attempting to clean it.
Your light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner.
WARRANTY
This product is warranted free from defects in material and workmanship for 2 (TWO) years after date of purchase. This limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is covered by this warranty and it is not transferable. Prior to returning your product to store location of purchase, please call the Toll- Free Help Line for possible solutions.
HELPLINE
For questions about this or any other PowerSmith™ product,
Please call Toll-Free: 888-552-8665.
Or visit our website:
www.powersmithproducts.com
©Richpower Industries, Inc. All Rights Reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Printed in China, on recycled paper
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC USA
www.richpowerinc.com
Toll-Free Help Line: 888-552-8665
WWW.POWERSMITHPRODUCTS.COM
SAVE THIS MANUAL FOR FUTURE REFERENCE
The images are for illustration purpose only. Actual product may vary for
different models
References
- Call2Recycle | Leading the Charge For Battery Recycling
- Powersmith Products - Features, Performance, and Versatility
- Call2Recycle | Leading the Charge For Battery Recycling
- Richpower Industries, Inc. - Products for Jobsite, Home, and Industry
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>