A O Smith Intelli-UV-Pro Water Purifier User Manual

A O Smith Intelli-UV-Pro Water Purifier

Product Information

The A. O. Smith Intelli-UV-Pro Water Purifier is a product designed to provide healthy and safe drinking water through its 6 stages of purification. It is powered by India’s 1st Dual Pass UV Chamber (patent applied) which ensures purified safe and healthy drinking water. The product is also equipped with 3 technologies (Dual Pass UV + SCMT (Silver Charged Membrane Technology) + UF Ultra Fine technology) to ensure there is no compromise on your family’s health. The product comes with a digital display that provides simple and intelligent display of information and indicates in advance when UV lamp and other filters need to be changed. The product is ISO 9001:2015 certified.

Product Usage Instructions

• Before proceeding with the installation instructions, inspect the Water Purifier and its component parts for possible damage. Do not install or attempt to repair any damaged component parts. If you detect any damage in the Water Purifier, please contact the dealer where the Water Purifier was purchased or call A. O. Smith Customer Care Centre. Verify that the voltage being supplied corresponds to that which is marked on the Water Purifier manual.
• For your safety and to avoid damage caused by improper installation, it is recommended that Water Purifier must be installed by A. O. Smith Company Authorised Service Technician only.
• To use the product, turn on the ball valve to allow water to flow into the Water Purifier. The water level indicator will show the level of water in the purifier. You can collect purified water from the normal water faucet.
• Please always read and follow all safety messages as provided in this user manual. All safety messages will follow the safety alert symbol and either the word DANGER or WARNING. The safety alert symbol alerts you to potential hazards that can hurt you and others.

Pre-instruction Literature

• On Receipt
  It is our policy to promote safe delivery of all orders. This product shipment has been thoroughly checked, packed and quality certified before leaving our factory.

• Visible Loss or Damage
  If any of the goods called for on the bill of lading or express receipt are damaged or the quantity is short, do not accept them until the freight or express delivery agent makes an appropriate notation on your freight bill or receipt.

• Concealed Loss or Damage
  When a shipment has been delivered to you in apparent good condition, but upon opening the packaging if any loss or damage has taken place while in transit, inform the carrier’s agent / A. O. Smith representative immediately.

• About this manual

  • This manual is a guide to good practice for operating and periodic maintenance of the A.O. Smith Intelli-UV-Pro Water Purifier.
  • This does not contain the full servicing procedures necessary for continued successful operation of this product. The services of A. O. Smith Company Authorised Service Technician must be employed periodically on the same.
  • Do not operate before reading manual supplied with this product.
  • Please follow instructions in this manual to ensure personal safety and proper operation of this product. A. O. Smith assumes no liability for installation or servicing performed by any unauthorised personnel.
  • Always install, operate, inspect and maintain this product in accordance with all applicable standards. Please store this user manual carefully for any future reference.

• Disposal of this Product
  (Waste Electrical and Electronic Equipment)

  • This marking on the product, accessories or User Manual indicates that the product and its electronic accessories (e.g. Remote, batteries and other replaceable electronic accessories) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable re-use of material resources.
  • Household users should contact their local government office, for details of where and how they can take these items for environmentally safe recycling. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

General Instructions

Safety
Your safety and the safety of your loved ones is paramount to us. There are several safety related messages in this manual, which have been provided during various steps such as the installation, operation and maintenance of your A. O. Smith Intelli-UV-Pro Water Purifier. These messages point out potential hazards and also educate on how to reduce any potential risks. Please always read and follow all safety messages as provided in this user manual.

IMPORTANT
These instructions have been written as a guide for the proper installation and operation of your Water Purifier. A. O. Smith will not accept any liability where these instructions have not been followed. However, for your safety and to avoid damage caused by improper installation, it is recommended that Water Purifier must be
installed by A. O. Smith Company Authorised Service Technician only.
Before proceeding with the installation instructions:

1. Inspect the Water Purifier and its component parts for possible damage. Do Not install or attempt to repair any damaged component parts. If you detect any damage in the Water Purifier, please contact the dealer where the Water Purifier was purchased or call A. O. Smith Customer Care Centre.
2. Verify that the voltage being supplied corresponds to that which is marked on the Water Purifier manual.

A. O. Smith Advantages

• Purity through 6 Stage UV purification
  A. O. Smith Intelli-UV-Pro provides healthy and safe drinking water with 6 stages of purification.

• Double protection with India’s 1st Dual pass UV chamber
  Intelli-UV-Pro is powered by India’s 1st Dual Pass UV Chamber (patent applied) in which water passes through the advanced high power 11 W UV lamp two times and ensures purified safe and healthy drinking water

• No compromise- 3 technologies in one
  The Intelli-UV-Pro is powered by 3 technologies (Dual Pass UV + SCMT (Silver Charged Membrane Technology) + UF Ultra Fine technology) in one power packed product, to ensure there is no compromise on your family’s health.

• Hot Water at Press of a Button
  Instant UV purified water with 3 temperature settings – Room temperature water, warm (45°C) and hot (80°C).

• Elevate your kitchen décor
  Modern and contemporary design and night assist make your kitchen look good. And a large 10L storage capacity provides clean and healthy water all day long.

• Stay Worry free with UV life alert
  Indicates in advance when UV lamp and other filters need to be changed. Digital Display provides simple and intelligent display of information.

Introduction

UV is a proven disinfection technology used in water purification which delivers micro-biologically safe water. The germicidal lamp inside the UV emits ultraviolet energy that has the capacity to alter the nucleic acid (DNA) of viruses, bacteria and cysts so they cannot reproduce and are thereby considered inactivated. The A. O. Smith Intelli UV-Pro Water Purifier incorporating UV purification technology produces germ-free potable water for drinking. Purified water is collected for drinking in a storage tank.

How does the A. O. Smith Intelli-UV-Pro Water Purifier work?
A. O. Smith Intelli-UV-Pro Water Purifier has 6 stages of purification system, wherein the water is passed through the various stages and progressively filtered to get purified water which is stored in the inbuilt storage tank.

• Stage 1 – Pre-filter
  The Pre-filter is used to remove physical contaminants such as dirt, dust, soil particles, turbidity present in the water. This improves the life of the Fine Sediment filter.

• Stage 2 – Fine Sediment filter
  The Fine Sediment filter is used to remove finer physical contaminants present in the water. This improves life of the SCB filter®.

• Stage 3 – SCB filter®
  The SCB filter® uses carbon block which reduces harmful chemicals including pesticides, volatile organic compounds, residual chlorine etc. It also adsorbs bad taste and odour causing organic compounds from water.

• Stage 4 – UV lamp (Dual pass)
  In this stage water is passed through UV housing wherein UV rays disinfects the water by eliminating water-borne disease causing micro-organisms like bacteria and virus making it healthy for drinking.

• Stage 5 – UF (Ultra fine) filter
  In this stage water is passed through Ultra fine filter where it removes deactivated microbial cells and cysts.

• Stage 6 – ZX filter
  In the final stage water is passed through SCMT (Silver Charged Membrane Technology) filter which ensures double purification of water making it Safe and Healthy for drinking.

Product Overview

Note: The Pre-filter and the Ball valve comes along with the product as standard accessories.

Function of indicators

• Power button
  This button is used to switch ON/OFF the Water Purifier.

• Tank full indicator
  This indicates that the Water Purifier tank is full.

• UV ON indicator
  This indicates that the UV lamp is ON and water purification process is in progress.

• UV change indicator
  This indicates that the UV lamp needs to be replaced.

  • UV change indicator glows when 10% life is remaining, indicating that it is time to replace UV lamp.
  • When UV lamp life reaches its end, this indicator will start to blink continuously and the unit will not function until UV lamp is replaced.
  • UV change indicator keeps blinking continuously with the buzzer beeping for 10 times every time the system is switched ON. The unit will not function until UV lamp is replaced.

• SCPA change indicator
  This indicates that except UV lamp all filters (Pre-filter, Fine Sediment filter, SCB filter®, UF (Ultra Fine) filter and ZX filter) needs to be replaced.

  • SCPA change indicator glows when 10% life is remaining, indicating that it is time to replace all filters.
  •  When filters life reaches its end, this indicator will start to blink continuously and the unit will not function until all filters are replaced.
  • SCPA change indicator keeps blinking continuously with the buzzer beeping for 10 times every time the system is switched ON. The unit will not function until all filters are replaced.

• Temperature indicator
  This indicates the temperature of water inside the hot water tank and displays the Error codes in case of fault in the Water Purifier.
  Note: Call A. O. Smith Customer Care Centre if you notice any Error codes (Refer page 12).

• Water Heating Button
  This purifier is capable of dispensing warm water (45°C) and hot water (80°C) as per  customer desire. This button is used to heat the water inside the hot water tank of the purifier.

• Child Lock Button
  As a safety feature, to prevent hot water from being dispensed accidentally and possibly harming a child, this button is used to unlock the hot water faucet.

Water flow

Electrical Diagram

Safety Precautions

Electrical Safety
Even though this product is designed keeping highest safety standards in mind, there are certain Do’s and Dont’s which need to be followed while using this product.

• Power plug must be used with a 230 V outlet. It is recommended to connect the product to the power supply only with the plug that is provided with the purifier. Do not pull out or touch power plug with wet hands to avoid electrical shock.

• Make sure that the feed water is tested before installation. Do not install the product if the TDS and Hardness are more than that prescribed in the recommended feed water conditions (Refer page 14).

• Product should be installed only by A. O. Smith Company Authorised Service Technician. Do not open the purifier for cleaning the filters/UV lamp* or for any part replacements. This must be done only by A. O. Smith Company Authorised Service Technician.

• Install the product away from direct sunlight.

WARNING
*Do not open UV housing as UV rays will be harmful to the human beings. This must be done only by A. O. Smith Company Authorised Service Technician.

Troubleshooting

Your A.O. Smith Intelli-UV-Pro Water Purifier may not function at its desired capability if used incorrectly. This may not necessarily mean that the product is faulty. For instances like these, please follow the steps given below to troubleshoot the problem without the help from a certified technician. If the problem still persists, please call Customer Care Centre immediately.

Error Messages and Actions

Note: Call Customer Care No. 1800-103-2468/1860-500-2468.

Technical Specifications

® + UV lamp (Dual pass)ç + UF (Ultra Fine) filter + ZX filterç.
Material of construction for plastic parts| Food safe, non-toxic, engineering grade plastics
Input Voltage| 150 – 300 VAC, 50 Hz
Power rating (Max)| 36 Watts
Pressure Rating*| 5 psi to 30 psi
Heating element wattage| 500 Watts @ 230 VAC
UV lamp Power Rating| 11 Watts
Warm water temperature| 45°C ± 5°C
Hot water temperature| 80°C± 5°C
Emergency cut out temperature| 90°C ± 3°C
Input water temperature| 5°C to 45°C

Patent Applied.
If input pressure exceeds 30 psi, a pressure reducing valve needs to be installed at the feed line. If the pressure is lower than 5 psi, a booster pump needs to be installed. Ensure you buy them from A. O. Smith Company Authorised Service Technician.

Recommended Feed Water Quality

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>