Smith s SKYLINE E 4KW Caspian Ceiling Mounted Electric Heater Owner’s Manual

June 1, 2024
Smith s

Smith s SKYLINE E 4KW Caspian Ceiling Mounted Electric Heater

Smith-s-SKYLINE-E-4KW-Caspian-Ceiling-Mounted-Electric-Heater-
PRO

Product Information

Technical Data

  • Motor: AC only
  • Finish: Outer casing 0.9mm zinc-coated steel, Polyester powder-coated RAL 9010
  • Heat Output: 4.0 kW
  • Mains Cable: 1.5m
  • Fused Spur: 20A
  • Total Power Consumption: 4.1 kW
  • Sound Levels: Fan-only 40dBA
  • Casting Colour: White
  • Installation: Maximum installation height 3.2m to underside, Minimum 150mm void space required for recessed installation, Not suitable for high humidity areas, 600mm side clearance required, Unit must be earthed, Supplied with remote wireless controller.
  • Control: Overheat protection with thermal cut-out, Wireless temperature control with programmable timer and frost protection (battery operated)
  • Attachment: Egg-crate grille accessory, Surface mounting kit (135mm), Ceiling tile spacer (85mm)

Ordering Guide

Model Packed Wt (kg)
SKYLINE E 4KW 9

Accessories

  • SKYLINE E 4KW EGG CRATE GRILLE ACCESSORY
  • SKYLINE SURFACE MOUNTING KIT (135MM)
  • SKYLINE CEILING TILE SPACER (85MM)

Dimensions
600 x 508 x 406 mm

Power Supply Cable
600 x 508 x 490 mm

Product Codes
HPSK40003

Product Usage Instructions

Installation
To install the Skyline unit, follow these steps:

  1. Ensure maximum installation height is 3.2m to the underside.
  2. Allow a minimum of 150mm void space for recessed installation.
  3. Avoid installing in bathrooms or high-humidity areas.
  4. Maintain a 600mm side clearance during installation.
  5. The unit must be properly earthed.
  6. Use the supplied remote wireless controller for operation.

Control
To control the unit:

  1. The unit features overheat protection with a thermal cut-out.
  2. The wireless temperature control includes a programmable timer and frost protection.
  3. If manual reset is needed, switch off the power at the mains, wait for 5 minutes, then switch the power back on.

FAQ

  • Can the Skyline unit be used in bathrooms?
    No, the Skyline unit is not suitable for installation in bathrooms or high- humidity areas.

  • What is the sound level of the unit when operating in fan-only mode?
    The sound level of the unit in fan-only mode is 40dBA.

  • Is the Skyline unit programmable?
    Yes, the unit comes complete with a programmable controller for easy customization.

INSTRUCTION

The electric Skyline fits neatly into existing ceiling space – replacing a 600mm x 600mm ceiling tile and because it is ceiling mounted, it saves valuable wall space – particularly important in retail units

  • It is unobtrusive and effective.
  • This high output fan convector effectively heats large areas.
  • Choice of punched steel or egg-crate grille options.
  • Supplied as standard in white but can be supplied in any colour.
  • Complete with programmable controller.

INSTALLATION

  • Motor: AC only.
  • Finish
    • Outer casing 0.9mm zinc-coated steel.
    • Polyester powder-coated.
    • Polyester powder-coated RAL 9010.
  1. Maximum installation height 3.2m to underside.
  2. A minimum 150mm void space is required for recessed installation.
  3. Not suitable for bathrooms and other high-humidity areas.
  4. Maximum installation flexibility: only 600mm – side clearance required.
  5. Facility for connection to 6mm threaded rod or chains (rods and chains – not supplied). 20 amp switched supply.
  6. The unit must be earthed.
  7. Supplied with remote wireless controller.

Control
Overheat protection: thermal cut-out. Manual reset procedure: switch power off at mains, wait 5 minutes, switch power on. Wireless temperature control with on/off function featuring a programmable timer and frost protection (battery operated) supplied.

Attachment

  • Egg-crate grille accessory (remove standard grille).
  • Surface mounting kit – 135mm. Provides a complete four-sided trim when fitted to a solid ceiling.
  • Ceiling tile spacer (85mm).

Specification
To specify state: Ceiling mounted heat emitter at 4Kw in white 600x600mm.
As Smith’s Caspian Skyline E.

Technical Data

Heat output

Model| Heat Output (kW)| Mains cable| Fused spur| Total Power Consumption (kW)| Sound Levels (dBA)| Casting colour| Fan-only
---|---|---|---|---|---|---|---
SKYLINE E 4KW| 4.0| 1.5m| 20A| 4.1| 40| white| n/a

Ordering Guide

Model Packed Wt (kg) Product Codes
SKYLINE E 4KW 9 HPSK40003

Accessories ****

SKYLINE E 4KW EGG CRATE GRILLE ACCESSORY HASK40104
SKYLINE SURFACE MOUNTING KIT (135MM) HASK40102
SKYLINE CEILING TILE SPACER (85MM) HASK40103

Dimensions

Smith-s-SKYLINE-E-4KW-Caspian-Ceiling-Mounted-Electric-
Heater-1 Smith-s-SKYLINE-E-4KW-
Caspian-Ceiling-Mounted-Electric-Heater-2

As part our commitment to continuous improvement Smith’s Environmental Products may change the specifications of its products without prior notification or public announcement. All descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form part of any contract. All dimensions are in mm unless otherwise stated. Please visit our website for the most up-to-date information.
Issue 007
March 2024 +44 (0) 1245 324 900
sales@smithsep.co.uk
SmithsEP.co.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals