KING SMITH WPA1F Pro Walking Pad User Manual

KING SMITH WPA1F Pro Walking Pad

Please read this manual carefully before using and then keep it properly.

WARNING

Electric shock hazard, where the appliance is used without the earth connection. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

To reduce the risk of personal injury, read and understand all the instructions before using this product.

Welcome to use

Thank you for choosing the KingSmith WalkingPad Walking device, hereinafter referred to as a WalkingPad, which possess various advantages including exquisite, foldable, innovative integral design. From now on, enjoy the quality life of walking at home.

Expansion dimensions

| 1432 x 547 x 129 mm

56.5″ X 21.5″ X 5″

Folding dimensions

| 822 x 547 x 129 mm

32.5″ X 21.5″ X 5″

Walking Area

| 1200x415mm 47″X 16.5″
Gross weight| 30 kg/ 66 lbs
Net weight| 27 kg/ 59 lbs
Maximum load| 105 kg/ 230 lbs
Applicable age| 14 – 60 years old
Applicable height| Unlimited
Minimum speed| 0.5 km/hr 0.5 mi/hr
Maximum speed| 6 km/hr 3.75 mi/hr
Power Input| 932W
Frequency| 50/60 Hz
Rated voltage| 110-120 v-

Sport mode

| Standby mode/ Manual mode/ Automatic mode

Product and Accessories

Please carefully check whether the contents of the package are complete and intact. If there is any missing or damaged, please contact the seller.

Function schematic diagram

Product main body

Introduction of the function of the indicator panel

WalkingPad remote control

Guide for initial operation

1. Choose flat ground to place the WalkingPad. It is forbidden to place it on a thick and soft cushion.
   • Please note: Don’t connect the power before the WalkingPad is fully unfolded.
2. Unfold the walking pad slowly and press it down to completely flat.
3. Check and adjust the walking belt to make sure it’s centered.
4. Connect the power cord and press the button to switch on.
5. Unlock all Functions by following two ways, otherwise the speed limit remains at 3km/hr (1.75mi/hr)
6. Walk 1 km (0.6mi) on device first, reboot to unlock all functions.
7. Complete Novice Guide by “KS Fit” APP to unlock all functions.
8. Search “KS Fit” App from Apple Store or Google Play and complete the installation.
9. Open the App, follow the prompts to set up the device.
10. Enter novice guide to unlock all functions.
11. Start to use the Walking Pad.
12. If the belt deviates from the orbit in use, please adjust it properly. SEE 06 Maintenance and service.
13. Short press: return to the previous mode.
    • Long press: switch to Standby mode.

Learn to use WalkingPad

Mode instruction

Standby Mode

• Light of the Standby mode is on; Motor and sensor stop responding.

Manual Mode

• Light of the manual mode is on; Control the speed through the remote control or APP.

Automatic Mode

• Light of the automatic mode is on; Speed is automatically controlled by an intelligent algorithm. It follows the speed of walking.

Instructions of the standby mode control

The motor and sensor stop responding in this mode to prevent nonusers from accidentally triggering the WalkingPad.

Mode Switch

• Short press: return to the previous mode.

Instructions of manual mode control (primary mode)

In this mode, the speed of the WalkingPad can be controlled by the remote control. It is recommended that beginners use the manual mode first and then use the automatic mode after being skilled in using the WalkingPad. The manual mode is controlled by the remote control by default, that is, the START/STOP button of the remote control is used to start or stop the WalkingPad, which can be modified in the client “Personalized”.

Description of automatic mode control (advance mode)

This is a challenging and higher-class mode, User can walk on the WalkingPad completely out of remote controller. We only recommend those who have good sports skills or WalkingPad experience to take the challenge.

Remote Controller Notice

If the remote controller has no response or you change a new one, the remote controller and WalkingPad need to re-establish communication.

Remote control pairing method: Restart the WalkingPad, press and hold down the mode switch button on the remote control immediately, and hearing the sound of “Beep” indicates the success of pairing.

_ Note: _During the operation, the remote control should be close to the LED display panel ofWalkingPad.

Error Warning Light

The “Error Warning Light” on the display panel is off when WalkingPad works well. When error occurs, the “Error Warning Light” turns on and shows its error code.

• E01: Communication Fault
• E02: Voltage Protection
• E03: 1PM Overheating
• E05: Overcurrent Protection
• E06: Motor Protection
• E0B: Sensor Fault

Safety Notice

• Please keep a rear distance of 1000 mm or more.
• Please choose sport shoes.
• Please do not stand up on the walking machine when it is under auto calibration situation.
• Please keep a distance of 500 mm or more for both sides.
• Using on uneven ground is prohibited.
• It is strictly forbidden to walk up and down the walking pad while walking. When an emergency occurs, please press the remote control START/STOP and step away from the walking pad from one side.
• Anti-pinch.
• Tum the power off before fold up the WalkingPad.
• Prohibition of vertical placement.
• Anti-involved, please do not trample.
• Please pull out the plug when you are not using it.
• Prohibition of lateral placement.
• Please keep your sight horizontal to avoid dizziness.
• More than one person on the Walkingpad is prohibited.
• Using machine with a pet is prohibited.
• Trampling the machine head is prohibited.
• Children should be supervised to ensure that they do not play with the Walkingpad.
• Walking sideways on the machine is prohibited.
• Walking backward on the machine is prohibited.
• Please use this product reasonably according to your physical condition (the elderly and pregnant women should use it cautiously). If you feel unwell, stop exercising immediately. If necessary, please seek medical attention.

Maintenance and Service

Clean the walking machine

• Tum off the machine and unplug the power cord.
• Add several drops of detergent on cotton rag or towel. Don’t pour the detergent on the belt directly, and don’t use acid or corrosive cleaners.
• Wipe off dust and stains on the frame, front panel and belt. Do not wipe backside of the belt.
• After using for a period, dust and stains may appear on the back part, that is normal situation, and just clean them up.

Adjust the belt

• Press and hold both Mode Switch Button and Acceleration Button on the remote control over 3 seconds.
• Front panel shows “CALI” and the speed is 4 km/hr ( 2.5 mi/hr ).
• If belt deviates to the left: Turn the left adjusting screw for a half-circle clockwise.
• If belt deviates to the right: Tum the right adjusting screw for a half-circle clockwise.
• If belt is slipping: Turn both left and right adjusting screw for a half-circle clockwise at same time.
• Keep the machine running for 1-2 minutes and check whether it needs to readjust.

Lubricate the Belt

• Tum off the machine and unplug the power cord.
• Lift up the belt and apply silicone oil on the backside of the belt.
• Tum on the machine again
• Keep the machine running under 4 km/hr ( 2.5 mi/hr ) for 10-20 20 seconds.
• Only apply 5 ml – 10 ml lubricant oil each time, too much lubricant oil makes the belt become slipping.
• Apply for silicone oil once every 3 months.
• Silicone oil is not included, please purchase separately.

Trademark and Legal Declaration

Beijing Kingsmith Technology Co., Ltd holds the patents of KingSmith Walkingpad Walking Device series products. Kingsmith edits and owns the copyright of this manual book. Without Kingsmith’s written permission, any form of unauthorized distribution, reproduction, publication, release or quotation by any institution or individual is prohibited. This manual contains as many as possible of all functions and instructions for use. However, due to product imperfections, design changes, etc., the description may still have discrepancies with what you have purchased. In view of product updates, the description in this manual book may differ from what you have purchased in color, appearance, etc. Actual supplies prevail. This appliance is not intended for persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Children aged 8 years and above and persons can use this appliance with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understood the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Product performance standard: Q/FTSMS0001-2017

Replacement and Disposal

• The battery contained in this appliance must be removed for or disposal.
• When replacing the battery, use only original battery, available from our online parts shop.
• The battery compartment is located on the underside of the appliance. Open the compartment by removing the screw in the cover using a suitable screwdriver, and then press the lower end of the locking catch on the connectors. In that way, both sides of the connection can be separated by pulling them apart.
• When inserting a new battery, push together the two connectors and ensure that the catch locks over the stop.
• Never dispose of old batteries in domestic garbage, but only through the proper public collection points. This also applies to the battery of defective appliances.

Devices marked with this symbol must be disposed of separately from your household waste, as they contain valuable materials which can be recycled. Proper disposal protects the environment and human health. Your local authority or retailer can provide information on the matter.

• IC ID: 25276-WPPRO
• FCC ID: 2ARDB-WPPRO

Manufacturer

• Beijing Kingsmith Technology Co., Ltd.
• Address: Floor 4, Building 25, Area 18, ABP Park, Fengtai, Beijing, China.
• MADE IN CHINA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>