ELECROW ESP32 HMI Display Touch Screen LCD User Manual
- June 14, 2024
- ELECROW
Table of Contents
ELECROW ESP32 HMI Display Touch Screen LCD
Thank you for purchasing our product. Please read this user manual carefully before use and keep it properly for future reference.
Screen Buttons and Interfaces
Screen appearance varies by model, and diagrams are for reference only. Interfaces and buttons are silk screen labeled, use the actual product as a reference.
Inch HMI Display
Package List
The following list diagram is for reference only. Please refer to the actual product inside the package for details.
IMPORTANT SAFETY WARNING!
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be done by children without supervision.
- WARNING : Use the detachable supply unit provided with this appliance only.
lnformationon the disposal for Waste Electrical & Electronic Equipment{WEEE). This symbol on the products and accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper disposal for treatment, recovery, and recycling, please take these products to designated collection points where they will be accepted on a free-of-charge basis. In some countries, you may be able to return your products to your local retailer upon the purchase of a new product. Disposing of this product correctly will help you save valuable resources and prevent any possible effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest collection point for WEEE.
Screen Buttons and Interfaces
**2.4 Inch HMI Display
**
**2.8 Inch HMI Display
**
**3.5 Inch HMI Display
**
**4.3 Inch HMI Display
**
5.0 Inch HMI Display
7.0 Inch HMI Display
Parameters
| Size | 2.4″ | 2.8″ | 3 . s · · |
|---|---|---|---|
| Resolution | 240*320 | 240*320 | 320*480 |
| Touch Type | Resistive Touch | Resistive Touch | Resistive Touch |
| Main Processor | ESP32-WROOM-32-N4 | ESP32-WROOM-32-N4 |
ESP32-WROOM-32-N4
Frequency|
240 MHz
|
240 MHz
|
240 MHz
Flash|
4MB
|
4MB
|
4MB
SRAM|
520KB
|
520KB
|
520KB
ROM| 448KB|
448KB
| 448KB
PSRAM| I| I| I
Display
Driver
| ILl9341V| ILl9341V| ILl9488
Screen Type| TFT| TFT| TFT
Interface| 1UARTO, 1UARTl,
1I2C, 1GPIO, 1*Battery
| 1UARTO, 1UARTl,
1I2C, lGPIO, l*Battery
| 1UARTO, 1UARTl,
1I2C, lGPIO, l*Battery
Speaker Jack| YES| YES| YES
TF Card Slot| YES| YES| YES
Active Area| 36.7248.96mm(WH)| 43.257.6mm(WH)|
48.9673.44mm(WH)
Size| | 5.0″| 7.0″
---|---|---|---
Resolution| 480272| 800480| 800*480
Touch Type| Resistive Touch| Capacitive Touch| Capacitive Touch
Main Processor| ESP32-S3-WROOM-1- N4R2| ESP32-S3-WROOM-1- N4R8|
ESP32-S3-WROOM-1- N4R8
Frequency|
240 MHz
|
240 MHz
|
240 MHz
Flash|
4MB
|
4MB
|
4MB
SRAM|
512KB
|
512KB
|
512KB
ROM|
384KB
|
384KB
|
384KB
PSRAM| 2MB| 8MB| 8MB
Display
Driver
| NV3047| ILl6122 + ILl5960| EK9716BD3 + EK73002ACGB
Screen Type|
TFT
|
TFT
|
TFT
Interface| 1UARTO, 1UARTl,
1GPIO, 1Battery
| 2UARTO, lGPIO,
l*Battery
| 2UARTO, 1GPIO,
l*Battery
Speaker Jack| YES| YES| YES
TF Card Slot| YES| YES| YES
Active Area| 95.0453.86mm(WH)| 10864.8mm(WH)|
153.8485.63mm(WH)
Expansion Resources
- Schematic Diagram
- Source Code
- ESP32- S3-WROOM-1 N4R8 Datasheet
- Arduino Libraries
- 16 learning Lessons for LVGL
- LVGL Reference
Safety Instructions
- To ensure safe use and avoid injury or property damage to yourself and others, please follow the safety instructions below.
- Avoid exposing the screen to sunlight or strong light sources to prevent affecting its viewing effect and lifespan.
- Avoid pressing or shaking the screen hard during use to prevent the loosening of internal connections and components.
- For screen malfunctions, such as flickering, color distortion, or unclear display, stop use and seek professional repair.
- Before repairing or replacing any equipment components, make sure to turn off the power and disconnect from the device.
Contact Technical Support
E-mail: techsupport@elecrow.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>