Nilight 60005C-A 20Inch 126W Spot Flood Combo Led Light Bar Installation Guide
- June 14, 2024
- Nilight
Table of Contents
Nilight 60005C-A 20Inch 126W Spot Flood Combo Led Light Bar
Installation
- Connect light bar wires to wiring hamess terminals respectively, black to ,red to red.
- Connect wiring harness to the car battery. Red wire (+) with fuse to positive, black wire (-) to negative
- Turn on the power and press switch on/off to test the light.
Caution
- The operating voltage is 12V DC, 16AWG ; Max. Wattage 18W/14AWG: Max Wattage 300W/12AWG; Max , Wattage 450w
- Please make sure all the exposed wires securely wrapped by electrical insulating tape to prevent short circuit.
- Please strictly follow the instructions to avoid any hazards. if you do not feel comfortable with the installation we recommend having a professional to install or install under his guidance.
Need Help?
If you’re having an issue with the product or need technical support , Nilight
team is always here to help and make sure your 100% satisfaction.
▶ Scan QR code to contact us
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>