Nilight TR-02 LED Tailgate Light Strip Instruction Manual
- June 4, 2024
- Nilight
Table of Contents
Nilight TR-02 LED Tailgate Light Strip
5 Full Functions
Installation Instruction
- Measure the recessed area between the bottom of the tailgate and the bumper shelf to ensure enough space to mount the tailgate light bar.
- Clean and dry the mounting surface.
- Mark the mounting position. Decide whether the wire bundle need to be towards the driver side or passenger side by testing when signals lights work properly. And then mark the correct direction of the wire bundle too.
- Peel off the adhesive tape at the back and stick the light bar according to the direction and mounting position you previously marked.
- You can also add on additional mounts and screws we provide to secure the light bar.
- Electrical Hook-up: plug and play the standard flat 4-pin connectors, connect the reverse wire to the reverse light wire on the vehicle
- Tie the wire bundle behind the bumper and make it out of view.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>