SHENZHEN 4K HDMI USB 3.0 Video Acquisition Card Instruction Manual
- June 14, 2024
- Shenzhen
Table of Contents
SHENZHEN 4K HDMI USB 3.0 Video Acquisition Card Instruction Manual
Setting
Step 1: Open OBS software, click” in the” Source “category, and create a
new video source.
Step 2: Click on the VIDEO capture device,
Step 3: Create a new name Click OK.
Step 4: Select USB3.0 HD VIDEO capture on the device bar
Step 5: Set capture resolution, audio output,
Step 6: After setting up, click start recording,
DATA ACQUISITION CARD SPECIFICATION
HDMI input 4K@60Hz, USB acquisition 1080P@60Hz/720P optional (recommended
input 720P) which supports 4K60Hz4:4:4RGB, 4K60HZ4:4:4YUV, 4K60HZ4:2:2YUV,
does not support 4K60Hz4:2:0 input.
HDMI input 4K@30Hz USB acquisition 1080P@30Hz
HDMI input 1080P 60Hz, USB acquisition 1080P 60/720P optional (recommended
input)
HDMI input 1080i, USB acquisition 960 * 540P
HDMI input 1280 720P, USB acquisition 128C 720P
HDMI input 480P 60Hz, USB acquisition 480P 60P
HDMI INPUT 576P 50Hz, USB acquisition 576P 50Hz
HDMI INPUT support standard CEA mode, USB acquisition port support USB2.0
high-speed mode 480M, can connect computer USB2.0, USB3.0 interface general
HDMI Signal Input Support HDMI 2.04k 60Hz4:4:4, the highest
HDMI 2.04K 60Hz4:4:4, support OBS, VLC, wait.
OBS software download address: http://obsproject.com/