NATHAN CR2032 Laser Light 3L Hydration Pack Instruction Manual
- June 14, 2024
- NATHAN
Table of Contents
NATHAN CR2032 Laser Light 3L Hydration Pack
PRODUCT INFORMATION
Specifications
Battery : 2 CR2032 coin batteries
Product Usage Instructions
Replacing the Battery
- Locate the small screw on top of Nathan’s LED button.
- Use a small screwdriver to unscrew the screw.
- Gently open the top portion of the button.
- Remove the old batteries.
- Insert the new batteries with the + positive mark facing down.
- Ensure that the top portion of the button is at an angle and does not fully open.
- Close the top portion of the button.
- Securely tighten the screw back in place.
Frequently Asked Questions:
How do I know when the batteries need to be replaced?
When the LED light becomes dim or stops functioning, it is an indication that
the batteries need to be replaced.
Can I use any other type of battery instead of CR2032?
No, it is recommended to use only CR2032 coin batteries for optimal
performance and safety.
TO REPLACE BATTERY:
The 2 CR2032 coin batteries can be replaced by the following easy steps
below:
INSTRUCTIONS
-
Step 1:
Locate the small screw on top of Nathan’s LED button & use a small screwdriver to unscrew it.
-
Step 2:
Open gently the top portion of the button & remove & replace both batteries with + positive mark facing down. -
Step 3:
Use caution when opening, the top does not open fully. The top needs to stay at an angle.
-
Step 4:
Once new batteries are in place, close the top portion and secure the screw back in place.