Shelly Shally Plus 1 App Instructions
- June 6, 2024
- Shelly
Table of Contents
SHELLY MOBILE APPLICATION
FOR
https://shelly.cloud/app_download/?i=shelly_generic
Introduction
Shelly devices can be controlled and managed directly on the local network or
by using the Shelly cloud service accessible via the Internet. Download the
Shelly Cloud Application by scanning the QR code above, or access the
devices through the Embedded web interface, explained further down in the user
guide. Shelly devices are compatible with Amazon Echo and Google Home-
supported functionalities. See details at
https://shelly.cloud/compatibility/.
Registration
The first time you load the Shelly Cloud mobile app, you have to create an
account which can manage all your Shelly devic es. You need to use an actual
e-mail because that e-mail will be used in case of a forgotten password!
Forgotten Password
In case you forget or lose your password, click the “Forgot Password?” link on
the login screen and type the e-mail you used in your registration. You will
receive an e-mail with a link to a page where you can reset your password. The
link is unique and can be used only once.
ATTENTION! If you are unable to reset your password, you have to reset
your device (as explained in the “Device Inclusion” section, Step 1)
First steps
After registering, create your first room (or rooms), where you are going to
add and use your Shelly devices. Shelly Cloud allows you to create scenes for
automatic control of devic es at predefined hours or based on other
parameters like temperature, humidity, light, etc. (with available sensors in
Shelly Cloud). Shelly Cloud allows easy control and monitor ing using a
mobile phone, tablet, or PC. Shelly Plus 1 can be grouped with other devices
in the application. It can also be set to trigger actions on other Shelly
devices by set parame ters. We also allow setting parameters for lights,
controlling blinds, etc, which are not a sim le ON/OFF.
Device inclusion
To add a new Shelly device, install it to the power grid fol lowing the
Installation Instructions included with the device.
Step 1
When the installation of Shelly is done and the power is turned on, Shelly
will create its own Wi-Fi Access Point (AP).
**WARNING! In case the device has not created its own AP Wi-Fi network
with SSID like ShellyPlus1-f008d1d8bd68 , please check if the device is
connected according to the Instal lation Instructions. If you still do not
see an active Wi-Fi net work with SSID like ShellyPlus1-f008d1d8bd68 , or
you want to add the device to another Wi-Fi network, reset the device. If the
device has been powered on, you have to restart it by pow bring it off and
then again on. After that, you have one minute to press 5 consecutive times
the button/switch connected to the SW terminal. You should hear the relay
trigger itself After the trigger sound, Shelly Plus 1 will return to AP mode.
If not, please repeat or contact our customer support at:
[support@shelly.cloud](mailto:support@shelly.cloud).
Step2**
Please keep in mind that Shelly devices inclusion is different on iOS and
Android devices.
-
iOS inclusion – Open the settings menu on your iOS device > WLAN and connect to the Wi-Fi network created by your Shelly device, i.e. ShellyPlus1-f008d1d8bd68 (fig. 1). Open your Shelly app again and type in your home Wi-Fi credentials (fig. 2)
-
Android inclusion – From the hamburger menu on the main screen of your Shelly App choose “Add device”. Then choose your home network and type in your password (fig. 3). After that, pick the Shelly device you want to include. The name of the device will be similar to Shelly Plus1-f008d1d8bd68 (fig. 4)
Step3
Approximately 30 sec. after discovering any new devices on the local Wi-Fi
network, a list will be displayed in the “Discov ered Devices” room by
default.
Step4
Select “Discovered devices” and choose the device you want to include in your
account.
Step 5
Enter a name for the device (in the Device Name field). Choose a “Room”, from
which the device will be positioned and controlled. You can choose an icon or
add a picture to make it easier to recognize. Press “Save device”.
Step 6
To control Shelly devices only through the local network, press “No”
Device Settings
After your Shelly device is added to the application, you can control it,
change its settings, and automate the way it works. To switch the device on
and off, use the ON/OFF button. For device management, simply click on the
device’s name. From there you may control the device, as well as edit its
appear ance and settings.
Edit device – allows you to change the device’s name, room, and picture.
General Device settings allows you to change settings.
Timer – allows you to manage the power supply to the device
automatically. You may use:
-
Auto OFF: After turning on, the relay output will automati cally shut down after a predefined time (in seconds).
-
Auto ON: After turning off, the relay output will be automat ically turned on after a predefined time (in seconds).
Schedules – this function requires working connection to the Internet. Shelly may turn on/off automatically at a predefined time and day throughout the week. You may add up to 20 weekly schedules.
Sunrise/Sunset – this function requires a working connection to the Internet. Shelly receives actual information through the Internet about the time of sunrise and sunset in your area. Shelly may turn on/off automatically at sunrise/sunset, or at a specified time before or after sunrise/sunset. Power on default mode – this setting determines the initial output state of the device after power on: -
ON : When the device is powered on, the output will be pow ered on by defau It.
-
OFF : Even if the device is powered on, the output will be powered off by default.
Restore last mode – when power is restored, the device will return to the last state it was in before the last power off/shutdown.
Firmware update – shows your current firmware version. If a newer version is available, you can update your Shelly device by clicking Update.
Factory reset – remove Shelly from your account and return it to its factory settings.
Device information – here you can see the unique ID of your device and the IP it got from the Wi-Fi network.
THE EMBEDDED WEB INTERFACE
Shelly can be set and controlled through a browser.
Abbreviations used
Shelly ID – the unique name of the device. It consists of 12 hexadecimal
characters, the base MAC address of the device.
It may include numbers and letters, for example, f008d1 d8bd68.
SSID – The name of the Wi-Fi network, created by the device, for example,
ShellyPlus1-f008d1 d8bd68.
Access Point (AP) – the mode in which the device creates its own Wi-Fi
connection point with the respective name {SSID).
Wi-Fi- the mode in which the device is connected to another Wi-Fi
network.
Initial inclusion
Step 1
Install Shelly following the connection diagrams described above and place it
into the junction box. After turning the power on, Shelly Plus 1 will create
its own Wi-Fi network (AP).
WARNING! If you don’t see the Wi-Fi -> AP, please follow Step 7 from the
Device Inclusion section of this guide.
Step2
Shelly Plus 1 has created its own Wi-Fi network {AP), with name {SSID) such as
ShellyPlus1-f008d1d8bd68. Connect to it with your phone, tablet, or PC.
Step 3
Type 192.168.33.1 into the address field of your browser to load the web
interface of Shelly.
General – Home Page
This is the home page of the embedded web interface. If it has been set up
correctly, you will see information about the state of the switch (ON/OFF), as
well as functionality menus. Channel settings – general settings about the
channel. Here you can configure
I/O settings, channel’s state, channel’s name, consumption type.
Timers – same as in the “Shelly Device Settings” section, Timers.
Schedules – same as in the “Shelly Device Settings” section, Schedules.
Webhooks – use events to trigger http endpoints. You can add up to 20
webhooks.
Device – get information about your device’s firmware version and
location. Perform reboot and factory reset.
Networks – configure Wi-Fi, AP, Cloud, Bluetooth, MQTT set tings.
MANAGING IN RELAY MODE
Relay screen
Here you can control, monitor, and change the settings for turning the power
on and off. You can also see the current status of the connected appliance to
Shelly > Buttons > Set tings> ON and OFF. To control Shelly, press relay:
- To turn on the load connected to the output press Turn ON
- To turn off the load connected to the output press Turn OFF
Press the icon to go to the previous menu.
Shelly management settings
The same is the Device Inclusion section of the guide.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>