BOIFUN Baby 5s Wifi Video Baby Monitor Camera User Manual

Baby 5s Wifi Video Baby Monitor Camera

FCC Statement
This equipment has been tested and found to comply with the imits for o Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, f not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that Interference will not occur in  particular installation. If ths equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the Interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Responsible for compliance could vold the user’s authority to operate this equipment (Example-use only shielded interface cables when connecting to computer or peripheral devices)
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This equipment complies with Part 15 of the FCC Rules. Operation is sublect to the following two conditions

• This device may not cause harmful interference, and;
• This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
The equipment comples with FCC Radiation exposure imits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
FCC ID: 2AG7C-BABYST (Camera)
FCC ID: 2AG7C-BABYIM (Monitor)

AFter-sale Support

Deor friends,
Thank you very much for supporting BOIFUN
If you have any issues, please emall your order number and the problem to admin@boifun.net. Recelving your message, we will provide o fast solution in 24 hours.
Please do not worry. Actually, many problems can be easily solved by setting, such as Battery Management, Networking Connection Fails, VOX mode, Alarm sound too loud, etc.If you have any questions or ambiguities during using, please feel free to contact
us. We will try to find a good solution with our professional engineers, and reply you in 24 hours.
Warm Regords
BOIFUN Service Team http://qr.hotlnk.cn/url/79829115556

What’s in the box

Please consult this checklist for all parts.

Description

Blinking red ight walt for network connection (slowly blinking) connecting the network (fost biinking)
Sold biue ight on: comera s working correctly
Pairing| Long press for 5 seconds to pair
Reset| Press RESET for 5 seconds 1o reset the camera (f you have.
modified settings, they wil return to factory defauits)

•Green light: Fully charged
Status light of using| •Yellow light: The display is on
•No light: The display is off
Microphone| Capture sound for your video
Antenna| Adjust the angle to get better signals
ON/OFF button| Long press 5 seconds to turn on and turn off the display
Zoom in/out| Zoom the image in 1X, 2X or 4X
Menu| •On the homepage, press to enter the menu interface;
•On the homepage, long press to enter the setting interface
Direction| Control the rotation directions; Select the menu items
OK| Confirm
Call| Make a call after pressing the button
SD card slot| Support local SD Card storage (Max.128G)
Reset| Press with a pin to reset the display
Back| •Press to back up:
•On homepage, long press to stop playing music

Installation

1. Install the camera on a flat surface.
2. Or use the included mounting bracket to fix the camera to a clean surface.

Connection

1. Connect the camera to the display
   Power on the comera and the disploy and then the camera wil connect o the display automatically.
   Note: f the connection to each other s not successful the first tme, press and hold the Reset button on the back of the comera ond reconnect the monitor ofte the second beep of the camera.The connection s distance Imited, so moke the distance betveen the comera.ond the display is no more than 1000ft
   Disconnect the camera to the disploy;
   1.Press Menu button on the display screen, and select > Camera Managemen t.
   2 Long press the OK button on the display screen to release the binding. Reconnect the camera to the dispoy
   1. Press the Menu button  display scree, and select > Comera Management
   2. Long press the camera pairing button until you hear the prompt tone.
   3. Press the. OK Bution on’he deplay streen start paitng.

NOTE:
If you have problems with connection,please feel free to contact admin@boifun.net for one-on-one customer service guidance:
2. Connect the camera to the App
“The camera con be connected both to the display ond the App, Generally it comnected fo the display by defaut
Follow the steps below to connect the camera to the App

1. Moke sure the Wi-Finetwork is @ 24 GHz network,as the comera doesrit support 5 GHz WiF
2. Download the BoifunCam App on our phone. Register a new account to log norlog in directly
3. Press the Reset button for five seconds until you hear the “BOOGU” beep, which means the comera hos been reser, afer 10-20 seconds, uou wil hear another beep and the red light of the camera biinks slowly.
4. Follow the step nstructions on your smartphone to odd the com, and scan the QR code: with your comera.

General setting

Set up volume:

1. Press Menu button on the display screen, and select and press OK to enter the interface.
2. Press UP and DOWN direction buttons to adjust volume.

Set up brightness:

1. Press the Menu button on the display screen, select and press OK to enter the interface.
2. Press UP and DOWN direction buttons to adjust brightness.

Set up time:

1. Press the Menu button on the display screen, and select > Time setting.
2. Press direction buttons to change date, time and time displaying mode.

Set up language:

1. Press the Menu button on the display screen, and select > Language.
2. Select the language you need.

Set up sleep mode:
You can set up sleep mode to increase standby time.

1. Press the Menu button on the display screen, and select > Sleep mode.
2. Select sleep mode as 1 minute, 5 minutes, 10 minutes, 30 minutes, 60 minutes or off.

Setting camera status indicator:

1. Press the Menu button on the display screen, select and press the OK button to enter the interface.
2. Press the left and right arrow keys to select on or off.

SD card:

1. Press the Menu button on the display screen, and select > SD card management.
   Then you can view the total capacity and remaining capacity of your SD card.

2. (Optional) You can format the SD card as you needed, but make sure that the important data is backed up.

NOTE: This product does not support hot-swapping. Please insert the SD card before power on or unplug it after power off Please format the sd card into FAT32 format before using it

Upgrade:
Make sure your camera is connected to a 24 GHz Wi-Fi.
You can upgrade your camera when the upgraded alarm appears. Or Press Menu button on the display screen, and select . @ > Device information to check whether there is an upgrade.
Low battery alarm:
When the camera is low on battery, the low battery alarm will appear on the display screen. Please charge the display as soon as possible.
Usage
1. Download
BoifunCam is available for both iOS and Android OS. Search the name “BoifunCam” in App Store or Google Play or scan the QR-Code to download the App.
http://qr.hotlnk.cn/79847667793
Note: A very small number of mobile phone models may not be compatible with BoifunCam.
We apologize for any inconvenience this may cause. If you encounter this situation, could you please send us your phone model by email? Our email address is admin@boifun.net. We will optimize the software in time, and we have prepared a backup software “CloudEdge” for you, which you can download and use from the Google Store or Apple Store. We would greatly appreciate your understanding and kindness!
2. Add device
Log in the BoifunCam, select “Add Device”.then select Baby Monitor and add the Baby Monitor to the App according to the screen tips (Make the Baby Monitor close to the router when configuring).
NOTE:

1. If you have problems with BoifunCam, please feel free to contact admin@boifun.net for one-on-one customer service guidance
2. If you need to re-select the WiFi network, please press and hold the “RESET” button for 5 seconds, the device will restart, and the indicator will be flashing red.

3. Rotate the camera
You can adjust the monitoring angle for better vision.
The direction buttons on the display screen are available when the camera is powered on.
Press direction buttons to rotate the camera horizontally and verticatly for a better vision.
4. Photo & video

• Take a photo:
  You can take a photo when you want to capture an interesting scene of your baby.
  Press the Menu button on the display screen, select   and press OK to take a photo.

• Record a video:
  You can record a video when you want to capture a meaningful time of your baby.
  Press the Menu button on the display screen, select and press OK to record a video.

• View the taken photos and recorded videos:
  1. Press the Menu button on the display screen, select and press OK to enter the interface.
  2. Select the camera and date, select the photo or video you want to view, and press OK to enter preview mode.

• For a video, press OK to play or pause in the preview mode.
  *the backup button to quit preview or return to main menu.
  

5. Play music
You can play music to soothe your baby when the baby is crying or sleeping. A variety of soft music is available.
Press Menu button on the display screen, select and press OK to enter the music interface. You can select different music, change the music cycle mode, or adjust the music volume.

6. Feeding reminder
Remind yourself to feed your baby, when you are too busy, or when you want to give your baby a regular diet.

1. Press the Menu button on the display screen, and select > Feeding reminder.
2. Press UP and DOWN direction buttons to select between 4 time options and press OK to start time setting.
3. When start to set up one feeding time, press LEFT and RIGHT direction buttons to change options between hour, minute, second and on/off: and press UP and DOWN direction buttons to change values and select on or off.
4. Press OK to save settings.
5. Select on or off to open or close feeding reminders.
   You can set up to 4 feeding times one day. And when the set time is up, a feeding alarm will appear on the dispiay screen.
   

7. Optional Access Channels
You can turn on or turn off the Wi-Fi network channel so that others cannot live view the videos by App if the function is off. And you can also view the visited records as all visits through the App will be recorded.
8. Smart care
You can turn on functions of motion detection, and noise detection, so that you can know  the baby status immediately, no matter you are sleeping, working, cooking and so on.

1. Press the Menu button on the display screen and select > Smart care.
2. Press UP and DOWN direction buttons to select options between motion detection, noise detection, and alarm volume, and press OK to start setting.
3. When starting to set up one detection mode, press LEFT and RIGHT direction buttons to change options, and press UP and DOWN direction buttons to adjust the sensitivity.

NOTE: If you have questions with any function, please feel free to contact admin@boifun.net for one-on-one customer service guidance

Functions

1. Pan/Tilt
   Rotate your camera by sliding on your smartphone, providing you with a good vision.

2. Video flip
   Flip your video stream up or down for maximum flexibility.

3. Motion detection
   The camera can detect movement, and then the camera will send you push notifications and app olerts.

4. Record
   Support 24H continuous recording with high capacity SD storage or Cloud storage.

5. Day & Night
   Never miss a moment, even in complete darkness, with powerful night-vision technology.

FAQ

Q. The display cannot be previewed properly?

A Check whether the display has connected to the camera. If not, pair the camera and the display firstly.

Q: Cannot find the pairing button?

A The pairing button is beside the power port. Long press the button for 3 seconds, and follow the step instructions of the display. (To enter the pairing interface of the display, press the Menu button on the display screen, and select _ gj > Camera Management.)

Q. What if the display screen is stuck and it doesn't work while pressing any buttons?

A: Press the reset button of your display with the pin, and then long press the power button of your dispiay to restart it.

Q: Why the camera or the display cannot identify the SD card?

A: Confirm whether the SD card is normally available and the format is FAT32.

Q: Why I can’t get the notifications with my cell phone App when I connect the camera to the display?

A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system has been opened.

Q: How can I add devices or configure my network?

A : The camera can be connected to both the monitor and the application. Generally, it connects to the monitor by default. Please follow the steps below to connect the camera to the application. 1.Make sure the Wi-Fi network is a 2.4GHz network, as the camera does not support 5GHz Wi-Fi. 2. Download the appropriate application an your phone. Register a new account to sign in oF sign in indirectly. 3. Reboot the camera with the pin until the red status light flashes stowly (you must connect the camera to the app within 2 minutes or you must reboot the camera again). 4. Follow the step-by-step instructions on your smartphone to odd the screen and scan the OR code with the camera.

Q: The device prompts offline?

A : 1. Check whether the equipment is in the power on state, and observe whether the working light of the equipment is on normally, 2 Check whether the Wi-Fi network is in good condition and restart the router. 3. if the device is located far away from the router, which results in the inability to obtain o qood Wi-Fi signal, it is recommended to move the router to a doser place or add a Wi-Fi omplifier to improve the WiFi performance of the home. 4. Delete the camera from your BolfunCam account and add It again after resetting the device. Check whether the device firmware and application program are the latestversion.

Q: Update router or Wi-Fi password?

A: Delete the camera from your BoifunCam account after resetting the device, use the new Wi-Fi and password to odd it again.

Q: Can't ploy historical video?

A: 1. Check the status of the SD card in Settings’ to ensure that the SD card has been successfully recognized. 2. Reinsert the SD cord. 3. In the application, format the SD card. 4. Try another new SD card.

Q: The phone cannot receive the alarm push?

A : 1. Tun on off the push pennissions of the “BolfunCam” application in the system settings of your mobile phone. 2. Make sure that the device s motion detection function is successfully turned on. 3. Restart the phone, and clear the cache on Android phones. 4 Check whether the network is good.

Q: The sound function does not work.

A: The sound detection interval is 1 minute, after the sound triggers the alarm, the interval is 1 minute again to avold frequent alarms.

If you encounter any other problems, please send your order and problem to admin@boifun.net 

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>