boifun VB805 Baby Monitor Instruction Manual

June 14, 2024
BOIFUN

VB805
Product Manual
Sales Email:[email protected]

AFTER-SALE SUPPORT

Dear friends,
Thank you very much for supporting Boifun!
Ifyou have any issues, please email your order number and the problem to [email protected]. Receiving your message, we will provide a fast solution in 24hours.
Please do not worry. Actually, many problems can be easily solved by setting. If you have any questions or ambiguities during using, please feel free to contact us. We will try tofind a good solution with our professional product engineers.
Warm Regards.
Boifun Service Team

http://qr.hotlnk.cn/url/79829027072

DESCRIPTION

boifun VB805 Baby Monitor - parts

1. Light Sensor 6. Infrared Lights
2.CameraLens 7. Speaker
3. Power LED Indicator 8.DC Jack IN
4. Microphone 9. Temperature Sensor
5.0N / OFF Switch 10. PAIR Button

boifun VB805 Baby Monitor - parts1

1. Antenna
2. Brightness Buttons
3.Volume Buttons
4. Power ON / OFF / Sleep Button
5. Lullaby Control Button
6. Zoom Button
7. Menu / OK Button| 8. Return Button
9. PTT Button
10. Signal LED Indicator
11. Charging LED Indicator
12. Navigation Buttons
13. Microphone
14,1CD Screen| 15. Volume Level LED
16. Speaker
17. Battery Compartment
18. Kickstand
19. DC Jack IN
---|---|---

boifun VB805 Baby Monitor - parts2

1. Signal Strength Indicator
2. Channel Selected
3. Temperature Of The Baby’s Room
4. Zoom Level
5. VOX Function Active
6. Alarm Timer Active
7. volume| 8. Lullaby Playback Active
9. Current Time
10. Battery Power
11. PTT Function Active
12. Pan & Tilt Function Active
13. Backlight Brightness Bar
14. Volume Level Bar
---|---

Specification

General:

RF Frequency:| 2400 MHz-2483 MHz
Spread Spectrum:| FHSS
Operating Temperature:| -10 to +45° C
Transmission Range:| Up to 1000 feet in open field
Monitor:
LCD Display:| 5′ LCD
Resolution:| 1280X720 pixel
Battery:| 3050mAh Li-ion 3.8V rechargeable
Time To Full Charge:| 5 Hours
Power Adapter| Input: 100-240VAC,50-60Hz; Output: 5V/1.2A ,Type C
Camera:
Sensor:| CMOS 1280X720 pixel
Vertical Turning Angle:| 90° up, 45° down
Horizontal Turning Angle:| 165° left, 165° right
Night Vison:| 8 IR LEDs
Power Adapter| Input: 100-240VAC,50-60Hz; Output: 5V/1.2A,Type C

CONNECT THE CAMERA TO THE MONITOR

NOTE: Use only the power adapters included in the package.If the display screen and the red power button are not on, you need to connect the monitor to the power cord for charging.
Step 1: Connect the camera to the power cord; Step 2: Turn on the camera, and the blue LED lights up; boifun VB805 Baby Monitor -
parts4Step 3: Long press the display switch for 3 seconds, the red power light is on;boifun VB805 Baby Monitor -
parts5 NOTE: If you have problems with connection,please feel free to contact [email protected] for one-on-one customer service guidance.

Pairing

NOTE: The Baby Unit is pre-registered and connected to your Parent Unit.If yor need to pair Baby Unit and Parent Unit again, do the following:
Step 1: Select MENU > Camera > Add Camera > OK;boifun VB805 Baby
Monitor - parts6 Step 2: Please short press PAIR button on Baby Unit. NOTE: If you have problems with connection,please feel free to contact [email protected]t for one-on-one customer service guidance.

FAQ

Q: The monitor cannot be previewed properly?

A: Check whether the monitor has connected to the camera. If not, pair the camera and the monitor firstly.

Q: Display and camera cannot be paired?

A: Please refer to “CONNECT THE CAMERA TO THE MONITOR” on page 5 and “Paring” on page 6 of the Product Manual for pairing. NOTE: 1. Please connect the camera and display to the power cord for charging to avoid failure caused by power exhaustion; 2. Please confirm that you have turned on the switch of the camera, and the blue power light is on; the red power light on the display is on.

Q: Why does the monitor or camera sometimes make a slight noise?

A: Please do not place the camera and the monitor too close (less than 30 cm), too short transmission distance will cause the signal to be transmitted in a loop, resulting in noise.

Q: Why does the monitor screen not light up when the camera detects sound?

A: 1. Please confirm that you have turned on the VOX function; 2.Please select the sensitivity of VOX mode according to your needs: low/medium/high.

Magical time with Boifun

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

BOIFUN User Manuals

Related Manuals