FATMUG Photo Frames User Manual
- June 13, 2024
- FATMUG
Table of Contents
Photo Frames
User Manual
Precautions
- Handle the frames gently when unpaking/hanging/cleaning
- While handling, Be careful not to drop the frames
- Avoid placing them near the edge of tables/beds to save them from falling off
- Make sure to keep the frames with glass (Acrylic) side facing up, whenever laying them on a surface
- Avoid stacking the frames on top of each other after unpacking
- Avoid drilling or nailing anywhere around electrical outlets
- Use a soft, dry or very lightly moist, microfiber cloth to gently dust and clean the frames and front acrylic glass occasionally. Avoid using rough fabrics or even paper towels for cleaning.
- Avoid placing them on damp walls, near fireplaces or appliances like coolers
- Avoid hanging frames on problematic wall surfaces, e.g. cracks in walls, loose plaster, mold on walls or stained walls
Visualizing your Arrangement
- The most essential step in hanging wall art is deciding on the arrangement and a suitable place for hanging the pieces.
- Using a rough estimate of the Wall Area to hang the pieces, lay the frames out on the floor. Move the pieces around until you have an arrangement that you like. It is recommended that the center of your arrangement lies at approximately 51” from the floor.
Reviewing the Surface of the Wall
- Review the surface of the chosen wall to finalize the hanging process.
Rough Surfaces
If the wall surface is rough, hanging the poster using a hammer and a nail is recommended| Smooth Surfaces
If the wall surface is smooth, hanging the poster using the foam tape is recommended.
---|---
|
Cleaning the surface
- Avoid hanging frames on problematic wall surfaces, e.g. cracks in walls, loose plaster, mold on walls or stained walls.
- Use a soft cloth to clean the wall surface and the frame before hanging them.
- Pick a reference corner point for one of the poster (preferably the one at the bottom right) and mark it on the wall
Sticking the Artwork with Foam Tape
- The Double Sided Foam Tape is highly adhesive. If the wall surface that you have chosen is smooth we recommend using this method
- Cut 4 Peices of Foam tape of length 2 inches each, for each frame/decal
- After hanging the first poster, repeat the process to complete the decided layout.
Hanging the Frames with Nail
- Start only after deciding the arrangement. Mark a point on the wall roughly estimating the midpoint of the width of the poster.
- After finalizing the first point, carefully hammer a nail into the wall.
- Hang the first frame on the nail and use the hanging jig to align it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>