BORMANN BWR5023 Tripod Support 3ton Instruction Manual
- June 4, 2024
- BORMANN
Table of Contents
BWR5023 Tripod Support 3ton
Instruction Manual
BWR5023 Tripod Support 3ton
Before using this appliance, read this operator’s manual and follow all its safety rules and operating instructions.
Safety instructions
- The study, understand and follow all instructions before operating this device.
- Do not exceed rated capacity.
- Use only on hard, leveled surfaces, with less than 3 degrees of slope.
- Center load on saddle.
- Use as a matched pair only.
- Stands are not to be used to simultaneously support both ends of a vehicle.
- No alterations shall be made to this product.
- Support only on areas of the vehicle as specified by the vehicle manufacturer.
- Only attachments and/or adapters supplied by the manufacturer shall be used.
- Use wheel chocks or another blocking device on opposing wheels before using jack stands.
- Do not use jack stands for any use other than the manufacturer’s specified usage.
- Do not use it if damaged in any way.
- Never use jack stands on a lawn mower or lawn tractor.
- Do not move or dolly the vehicle while on support stands
- Do not rock the vehicle while working on or around equipment.
- The following are not recommended for supporting this equipment foundation, homes, mobile homes, trailers, RVs, Campers, Fifth wheels, etc.
- Failure to heed these markings may result in personal injury and/or property damage.
Technical Data
Capacity (Ton): 3
***** The manufacturer reserves the right to make minor changes to product
design and technical specifications without prior notice unless these changes
significantly affect the performance and safety of the products. The parts
described/illustrated in the pages of the manual that you hold in your hands
may also concern other models of the manufacturer’s product line with similar
features and may not be included in the product you just acquired.
- Please note that our equipment has not been designed for use in commercial, trade, or industrial applications. Our warranty will be voided if the machine is used in commercial, trade, or industrial businesses or for equivalent purposes.
- To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair, or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer
Operating Instructions
- Put the jack stands on hard level ground.
- Adjust the height by pulling up on the ratchet.
- Place load on the center of the saddle for safety it is strongly recommended that lifting means not be removed while jack stands are supporting the vehicle.
- Secure the ratchet by turning the stopper to hold the load.
- Make sure the stopper has been securely inserted.
- Release the stopper and let the ratchet glide down to the lowest position when storing the jack stand.
- Inspect before each use. Do not use if bent broken or cracked components are noted. Prevent corrosion. Clean as needed and wipe with an Oily cloth and keep in a dry area when not in use.
- Visual inspection shall be performed before each use of the stand by checking the abnormal conditions, such as cracked welds, leaks, and damaged, loose, or, missing parts, if the stand is believed to have been subjected to an abnormal load or shock inspection, shall be made by the authorized repair facility.
- Equipment that appears damaged or worn or operates abnormally shall be removed from service until repair.
- Repair should be made by an authorized repair facility.
- An annual inspection of the stand is recommended and should be made by the manufacturer’s or supplier’s authorized repair facility to ensure that your stand is in optimum condition and that the stand has correct decals and safety labels specified by the manufacturer.
Assembly Diagram
****DISPOSE OF PACKAGING RESPONSIBLY
DO NOT DISPOSE OF ELECTRICAL GOODS IN HOUSEHOLD WASTE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>