Brick Attic A1H7Uv8KeJL Armless Office Chair Instruction Manual
- June 14, 2024
- Brick Attic
Table of Contents
Brick Attic A1H7Uv8KeJL Armless Office Chair
Instructions for Use
Thanks for purchasing our products. Please read this manual before assembly. And please assemble in order. After the assembly, keep the instructions properly. Make sure all the parts are concluded (9 kinds in total).
Accessories List
Notice
If any questions, contact BA-Service-01@outlook.com]
- This is a single chair, so please do not seat 2 or more persons, just seat only one person.
- Do not stand on the chair.
- Do not sit in reverse or sit outside of the seat cushion.
- Check the screws once every 6 months, to make sure the screws are tight. Do not use the chair when the screws are loose.
- Please assemble according to the instructions.
Assembly Instruction
Please assemble in a wide and flat place.
-
Step 1
Fix the Base Plate (3) to the bottom of the Seat Cushion (2). Tighten the Screws M6x20mm (7) with Hexagon Wrench (9) firmly. -
Step 2
Fix the bottom of the Backrest (1) to the back of the Seat Cushion (2). Tighten the Screws M6X35mm (8) with Hexagon Wrench (15) firmly. -
Step 3
Pick up the Air Rod (5) and Base Tube (4). Insert the Air Rod (5) and Decorative Circle (6) into Base Plate (3). There’s a hole in the middle of the Base Tube (4). Press the Seat Cushion (2) from top to bottom, use your whole body’s strength to insert it firmly. -
Finish
Activate Your Warranty Now! Brick Attic serves you wholeheartedly. Before using the product, we recommend that you scan the QR code next to it and activate the warranty first so that we can bring you a better after-sales guarantee and more considerate service.