Brick Attic BA-7001 Living Room Chair Instruction Manual
- June 21, 2024
- Brick Attic
Table of Contents
Brick Attic BA-7001 Living Room Chair Instruction Manual
Thank you for purchasing our products. Please read this manual before assembly. And please assemble in order. After the assembly, keep the instruction properly. Ensure that all the components are included (a total of 9 different kinds).
Parts list
(A) Backrest 1PC| | (B) Cushion 1PC| | C) Back Pillow 1PC| | (D) Cross Bar
1PC| | (D) R 1PC|
---|---|---|---|---|---|---|---|---|---
(D) L 1PC| | (K) Felt 4PCS(| | (H) Wrench 1PC| | ) Screw 12PCS| 
| |
Notice How to differentiate between the inside and outside of the armrest frame
Big hole faces outward
Small hole faces inward
Notice If any question, contact BA-[Service-01@outlook.com]
- When tightening the screw, first tighten all the screw fixing holes and then tighten them with a wrench.
- This is a single chair, so please do not seat 2 or more persons, just seat only one person.
- Do not stand on the chair. Do not sit reverse or sit outside of the seat cushion.
- Check the screws once every 6 months, to make sure the screws are tight. Do not use the chair when the screws are loose.
- Please assemble according to the instructions.
Installation Steps
Step 1
Use 2 J screws to connect one armrest (R) to the seat cushion
Step 2
Connect one armrest (R) to the backrest with 2 J screws,
Step 3
Use 2 J screws to connect one side armrest (R) to the crossbar
Step 4
Use 2J screws to connect another armrest (L) to the seat cushion.
Step 5
Connect another armrest (L) to the backrest with 2 J screws
Step 6
Connect another armrest (L) to the crossbar with 2 J screws
Step 7
Put pillow (C).
Step 8
Attach felts (K) of the four feet. to the bottom
Step 9
The installation is now complete.
Activate Your Warranty Now!
Brick Attic serves you wholeheartedly. Before using the product, we recommend scan- ning the QR code to activate your warranty. This will enable us to provide you with better after-sales support and more attentive service.
Scan the QR code to watch the installation video.
