VIVO DESK-V201B Height Adjustable Childrens Desk and Chair Instruction Manual
- June 14, 2024
- Vivo
Table of Contents
VIVO DESK-V201B Height Adjustable Childrens Desk and Chair
Assembly Video & Product Info
CAUTION!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo- us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
DO NOT EXCEED WEIGHT CAPACITY
FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT
TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART
- USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: PINCH POINT DO NOT PLACE HANDS ON OR NEAR SUPPORT BARS. MOVING PARTS CAN CRUSH AND CUT. PINCH POINTS ARE CREATED DURING LIFTING AND LOWERING THE WORK SURFACE. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS PERSONAL INJURY.
We’re Here for You
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer
immediate assistance with rapid response times. If any parts are received
damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
- Give us a Call:309-278-5303
- AVG. RESOLUTION TIME (within office hrs): 5M 4S
- Chat Us:www.vivo-us.com
- AVG. RESOLUTION TIME (within office hrs): < 15 M
- Email Us:help@vivo-us.com
- AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Package Contents
Included Hardware & Tools
Tools Needed
Weight Capacity
CHAIR ASSEMBLY STEPS
STEP 1 Place Chair Leg (A) into Feet (B).
- Secure Feet to Chair Leg using M6x20mm Screws (S-B), Metal Lock Washers (S-A), and 4mm Allen Wrench (T-A).
STEP 2
Secure the Right Support (C) laptop on the right side of Chair Leg (A) using
M6x20mm Screws (S-B), Plastic Washers (S-C), and a 4mm Allen Wrench (T-A).
Slide Straight Support (E) into Left and Right Support (C,D). Then secure Left Support Tube to Chair Leg (A) using M6x20mm Screws (S-B), Plastic Washers (S-C), and 4mm Allen Wrench (T-A).
STEP 3
Place Seat Bottom (F) over Right and Left Supports (C,D). Secure using
ST4.8x25mm Screws (S-D) and a Phillips screwdriver.
- Slide the Seat Back (G) onto the Right and Left Supports (C,D).
STEP 4
Secure the Seat Back (G) to the Right and Left Supports (C,D) using M6x20mm
Screws (S-B) and 4mm Allen Wrench (T-A). If needed, the chair can be levelled
using pads on the Feet (B).
DESK ASSEMBLY STEPS
STEP 1
Press Desk Legs (J) into Feet (B), making sure legs are fully seated in
openings. Secure Feet (B) using M6x20mm Screws (S-B) and Metal Lock Washers
(S-A). Tighten with 4mm Allen Wrench (T-A).
STEP 2
Press Desk Legs (J) into Feet (B), making sure legs are fully seated in
openings. Secure Feet (B) using M6x20mm Screws (S-B) and Metal Lock Washers
(S-A). Tighten with 4mm Allen Wrench (T-A). Assemble Left Drawer Slider (K)
and Right Drawer Slider (L) to Desktop (F) using M6x12mm Screws (S-E) and
Plastic Washers (S-C). Tighten with 4mm Allen Wrench (T-A).
STEP 3
Loosen the knobs on Desktop (F) to lift the top, then tighten the knobs to
secure it in place.
Loosen the knobs on Desktop (F) to lift the top, then tighten the knobs to
secure it in place. Press Hook (K) onto Desktop (F) support making sure it is
facing out from the desk. Secure Desktop (F) to Desk Legs (H) using M6x40mm
Screws (S-F), Plastic Washer (S-C) and 4mm Allen Wrench (T-A).
STEP 4
Extend both slides on Drawer (G) and simultaneously slide them inside of
previously installed Left and Right Drawer Sliders (K,L).
STEP 5
Level desk by adjusting pads on the underside of Feet (B).
ADJUSTING CHAIR AND DESK HEIGHT
To adjust the chair or desk height, remove the 4 pre-installed screws on Chair
and Desk Legs (A,J) using the 4mm Allen Wrench (T-A). Reinstall screws at the
desired height.
Need Help? Get In Touch
Monday-Friday from 7:00 am-7:00 pm CST
- help@vivo-us.com
- www.vivo-us.com
- Chat live with an agent!
- 309-278-5303
FOR MORE GREAT VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: WWW.VIVO- US.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>