RAD4D Lancelight High Pressure Washing Flashlight User Manual

RAD4D Lancelight High Pressure Washing Flashlight

RESULTS OF THE LANCELIGHT

1. After initial installation, no set up required, providing excellent vision to working area.
2. Unlike some headlamps, no blinding effect when facing each other (Do not point Lancelight in eyes)
3. No uncomfortable feeling of light strapped to head or body with a easy on/off Switch located on the handle.
4. Happy with ease of use, providing efficient quality work.
5. Safer workplace providing less risk as Vision and staff whereabouts are increased.

INCLUSIONS

INSTALLING THE LANCELIGHT­CLIP TO THE LANCELIGHT

1. Place Lancelight-clip top plate around Lancelight
2. Place Lancelight-clip bottom plate around Lancelight
3. Fasten together using the hex tool and 4x hex bolts provided

ABOUT LANCEPIPE COVER MOUNT

INSTALLING THE LACELIGHT- CLIP TO THE LANCE MOUNT

1. Unfasten side locking screw
2. Slide together in adjacent grooves
3. Refasten side locking screw

INSTALLING THE LANCELIGHT- CABLE SWITCH TO LANCELIGHT

1. Unscrew standard backing plate
2. Screw on Lancelight-cable switch backing plate

INSTALLING THE LANCE MOUNT TO THE LANCEPIPE

1.  If joined in packaging, unscrew 4 Lance-clip screws.
2. Place Lancelight with joined Lancelight clip in position best suited, Over the pressure washing lance pipe or lance pipe covering.
3. Place Lancelight clip bottom plate underneath the opposite side of the Top Lancelight clip
4. Reinsert 4 x screws, fasten with hex tool provided.

INSTALLING THE LANCELIGHT-CABLE SWITCH TO THE ON/OFF MOUNTING POINT,

PRESSURE WASHING HANDLE.

(Some handles may vary)

1. Guide wire to avoid damage
2.  Line up switch end on desired mounting point
3. Place 3 x switch bracket clips over switch end in lining groves (skip if using 4.2)
4. Screwing brackets into pressure washing handles may damage them, They should be installed by a professional. This may also void your pressure washing handles warranty.
5. Using 4.2 x 5mm screw’s provided, Screw brackets in, fasting the on/off switch in position.
   If not fastening with screw, we recommend using a cable tie. (Cable tie not included)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>