LIGE B0BY46CWN4 Smart Watch for Women User Manual

LIGE B0BY46CWN4 Smart Watch for Women

FEATURES

If you find that the steel belt is too short for your needs, we are pleased to offer free steel belt accessories that can be used to extend the strap. These accessories will arrive within 1-3 days.
If you have any additional questions or concerns, please feel free to contact us via email at [email protected] We are committed to providing exceptional service and support to our valued customers, and we are always hap-py to assist in any way we can.

Charging and active

• A: Connect the ST-G charging cable to a 5V-1A adapter and plug it in. Charging the device for 2-3 hours.
• B: Align the magnetic suction tube with the metal plate on the bottom of the device’s outer shell. The magnet will automatically attach to the positive and negative poles and charge the device.Ensure that the charging contacts are clean and free from dirt and debris.
  NOTE: If the device is not used for a long time, the battery may enter a 0 voltage protection state. Charge the device for at least 15 minutes to accumulate enough charge to start the watch at a sufficient level. It is recommended to charge the device once a month. Keep the device fully charged and power off when not in use.

APP download

1. Search “FitCloudPro” in the APP store
2. Scan QR code to download.

How to customize your watch face?

Long-press the current watch face to enter the watch face settings. Smart watch comes with a variety of pre-installed watch faces and also allows you to download additional watch faces from the watch face app market.

Limitations of Customization:
You can only save one custom watch face at a time. If you choose to download another watch face or customize a new watch face, the previously saved watch face will be replaced. This means that you will lose the previous customization and it cannot be recovered.

use the touchscreen

Please Turn On The Bluetooth of Mobile Phone Frist.

• Step 1: Open “FitCloudPro”APP–“OK, Allow”– “Device”–“Add peripheral Now”–“Search Now”–Find ST-G.

• Step 2. Connect the Bluetooth Call function
  Note: Only after this connection can you play music and answer calls

• a.Swipe right on the standby screen of the watch, select the call icon, and then turn on the audio Bluetooth switch.”

• b. Open your phone’s settings.
  Go to the Bluetooth interface . Select “Audio-ST-G” to connect to it.

• c . If you don’t want your watch to play audio when you receive calls, you can turn off this function . This is helpful if you’re in a noisy environment or want to maintain personal privacy . Simply disable the function manually. (This switch only turns off Bluetooth call and Bluetooth play)
  Every time the watch is turned off/ restarted or returned to the factory settings, the call function will be turned off by default .

• d . If the wristband is too far from your phone for over 2 minutes, it will automati-cally disconnect to save battery life. To reconnect, you may need to manually connect via Bluetooth .

• e . To switch back to the watch when answering or making a call on your mobile phone, simply manually select the bracelet on your phone, as shown in the picture below .

Why is the weather forecast inaccurate?

After connecting your phone and watch via Bluetooth, the weather forecast may not be accurate. You need to open the weather reports button in the “FitCloudPro” to get the accurate local weather forecast.

Why the watch can’ t receive the message notification?

Please make sure that the mobile phone Bluetooth is turned on, the FitCloudPro APP is running, and the bracelet is always connecting to the mobile phone Bluetooth!
Note: Smart watch won’t push messages when your phone is being used, unlocked, or when software such as WhatsApp, SMS, or Facebook is logged in on your computer. This is to save power and avoid interruptions.
To ensure message notifications are received on your smartwatch, make sure to turn on message push in the FitCloudPro settings and ensure that message notifications are visible on the notification bar of your mobile phone. Note that unused apps on Android phones may be automatically cleaned up in the background, which can cause your watch to disconnect and stop receiving notifications.

• XIAOMI
  Setting-apps-permissions-Autostart-open the FitCloudPro

• HUAWEI
  Setting-apps&services-app launch-open the FitCloudPro

• SAMSUNG
  “Smart Manager “- find the “Auto-Run Applica-tion” option, –enter the “Auto- Start Application” setting interface – open the auto-start setting program.

NOTE:

1. If the exercise, sleep and heart rate data are not synchronized to the APP, please try to disconnect Bluetooth and reconnect.
2. The watch should be unbound from the current account before binding another account;
3. If watch doesn’t work or has a bug, please try to reset the watch or reinstall the APP.

The watches have various sensors and algorithms to monitor users’ physiological indicators：

1. These indicators include heart rate, blood pressure, blood oxygen, sleep, calories, and steps.
2. The functions are simulated by AI software to provide users with information about their health status.
3. It is recommended that users consult a doctor for personalized advice if we have any health problems or are starting a new exercise program.
4. The data from smartwatches should only be considered as a reference and not be used to replace professional medical advice or diagnosis.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>