LIGE B0BNJBPS9B Bluetooth Calling Classic Smart Watch User Guide
- June 10, 2024
- LIGE
Table of Contents
User Guide
B0BNJBPS9B Bluetooth Calling Classic Smart Watch
For information on service:
please contact Amazon Seller customer service for regarding repairs and
warranty.
You can also contact us by email:
[email protected]
Scan code to view operation video
APP download
- Search “Da Fit” in the APP store (Apple store/Google store).
- Scan QR code to download.
http://plus.crrepa.com/app-
download/dafit
Charging and Active
Use the ST5 charging cable, then insert the USB to your laptop or any USB port
with 5V 1A to charge the Watch before use to ensure that the Watch is fully
charged. The charging time is about 2 hours. Make ensure the charging connect.
NOTE:
If the watch battery runs out , It may enter a silent protection state,The
watch needs to be charged for 5-10 minutes to activate. If the device is not
used for a long time, please be sure to replenish it every one month.
Pairing
The MAC address on the “Setting’-“About” page could help you identify your device on the scanning list.
Use the Touch Screen
This bracelet must be connected to the phone twice
Step 1: Open “Da Fit “APP–“OK, Allow”–“Add A DEVICE”–Find ST5 and choose—“Pair’– “Allow’–Done
During this connection process, there will be a prompt to ask whether to open the notification and open permission request confirmation. Please make sure to confirm the open notification reminder and allow all permissions. (If not authorized, it will affect the information reminder and address book and other functions)
Step 2. Connect the Bluetooth Call function
Note: Only after this connection can you play music and answer calls
- Swipe left on the standby interface of the bracelet, the first item. As shown in the picture below left. Turn on the Bluetooth play & call switch
- After confirming that the call function is turned on,After connecting to the device with the bluetoot of “Audio_ST5” on the phone-Settings-Bluetoot-(At this time, the communication interface of the left swipe on the standby interface of the bracelet shows green), you can make calls and play music through this bracelet’s Bluetooth.
-
If you don’t want to connect through call audio bluetooth due to environment or power saving, please pull down the main page – – turn off call audio,as shown in the picture.
(This switch only turns off Bluetooth call and Bluetooth playback)
****E very time the bracelet i s turned off/restarted or
restored to factory settings, the call function is turned off by default.
Please turn it on manually in the drop-down
menu. -
I f you answer or make a call on the mobile phone, if you need to return to the bracelet, you must manually switch to the bracelet on the mobile phone As shown in the picture below right.
-
If the wristband is disconnected from the phone for more than 2 minutes due to the distance, in order to ensure the battery life, the wristband will automatically close the
connection with the phone. At this time, please open the DAFIT APP on the mobile phone, and the bracelet will automatically connect again.
Due to different phone models, you may need to manually click connect in the phone. settings-Bluetooth
Why the watch can’ t receive the message notification?
Please make sure that the mobile phone Bluetooth i s turned on, the DAFIT APP
i s turned on, and the bracelet is always connecting to the mobile phone
Bluetooth
NOTE:
If the phone is not locking or the software (whatapp, SMS, facebook…) is
logging in the computer, the smart watch will not push messages for reduce
power consumption and disturbing. Please allow all the notification permis-
sion(WhatsApp, Facebook, Twitter, Phone, SMS.) at the DAFIT APP
Since Android mobile phone background will automatically clean up the App which not commonly used, it will cause the watch connection to drop and no longer push the message.
- Make sure turn on message push i n Dafit setting.
Make sure the message can be displayed in mobile phone’ s notification bar,message notification is pushed by reading the phone notification bar,the watch can’ t get notification if the message push closed i n mobile phone setting
XIAomI
Setting-apps-permissions-Autostart-open the Da Fit
HUAWEI
Setting-apps&services-app launch-open the Da Fit
SAMSUNG
“Smart Manager ” – find the “Auto-Run Application” option, –enter the “Auto-
Start Application” setting interface – open the auto-start setting program.
*** If the notification still cannot be displayed, please try to reset the
watch, or reinstall the APP.
Smart Wtch Features
Heart Rate Test
The Smart Watch could record your heart rate all day.
You also could tap on the page to start measuring heart rate.| Steps
Smart Watch automatically tracks Steps taken on the screen.
Note: Your movement stats reset to zero at midnight.
---|---
|
Training
Tap the training icon on the menu to start a new training measure recording,
there are 7 sport modes to be chosen.
The last training recording will be shown on the training page.| Sleep
If you keep wearing Smart Watch in your sleep, it can provide the hours slept
and
quality of sleep stats on both the screen and the APP.
Note:Sleep stats reset t o zero at 8:00pm.
|