DMP LT-2751 XT System User Guide
- June 14, 2024
- DMP
Table of Contents
XT SYSTEM
USER GUIDE
https://xtuserguide.dmp.support/xtsug/
Full XT System User Guide
To view the full XT System User
Guide, scan this QR code or visit
DMP.com.
How to Handle an Alarm
Enter your user code or present your credential to the keypad if it has a
built-in proximity reader.
You will see:
IS THIS A FALSE ALARM? YES NO or CANCEL VERIFY
Real Alarm
Press NO or VERIFY to notify the emergency monitoring center. Your system will
remain armed.
False Alarm
Press YES or CANCEL to cancel the alarm. Your system will disarm.
Arm an All/Perimeter System
Thirlane Keypads
- Press CMD until ARM DISARM displays. Select ARM.
- Enter your user code and the keypad displays PERIM ALL.
- Select ALL to arm all areas. The keypad displays ALL SYSTEM ON. Select PERIM to arm only the perimeter. The keypad displays PERIMETER ON.
Touchscreen Keypads
- Press and release the shield to open the arming options screen. Select ARM.
- Enter your user code if prompted and the keypad displays PERIM ALL.
- Select ALL to arm all areas. The keypad displays ALL SYSTEM ON. Select PERIM to arm only the perimeter. The keypad displays PERIMETER ON.
Disarm an All/Perimeter System
Thinline Keypads
- Press CMD until ARM DISARM displays. Select DISARM.
- Enter your user code and the keypad displays ALL? NO YES.
- Select YES to disarm all areas. Select NO to disarm individual areas and select YES to disarm the area or NO to leave the area unarmed.
Touchscreen Keypads
- Press and release the shield to open the arming options screen. Select DISARM.
- Enter your user code and the keypad displays ALL? NO YES.
- Select YES to disarm all areas. Select NO to disarm individual areas and select YES to disarm the area or NO to leave the area unarmed.
LT-2751 © 2023 Digital Monitoring Products, Inc. 23053
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>