SNAILAX SL-256 Shiatsu Massage Cushion With Heat User Manual

: June 13, 2024
: SNAILAX

SNAILAX SL-256 Shiatsu Massage Cushion With Heat

SNAILAX-SL-256-Shiatsu-Massage-Cushion-With-Heat-
product

Product Information

The Shiatsu Massage Cushion with Heat SL-256 by Snailax Corporation is designed to provide a soothing and relaxing massage experience. It offers various features including full back Shiatsu massage, flexible massage nodes, spot massage, soothing heat therapy, seat vibration massage, intensity control flap, and luxury PU leather combined with mesh cloth.

Technical Data

Measurements: 40 x 16 inches
Weight: 5.8lbs
Voltage: Input: AC 100-240V ~50/60Hz, Output: 12VDC 1500mA max.
Nominal Power: 18 Wa
Automatic runtime: 15 minutes

Product Usage Instructions

Attach the massager to a chair using elastic straps or place it on another support surface.
Connect the adapter cable to the corresponding cable on the cushion.
Plug the home adapter into an outlet.
Turn on the device using the controller (refer to instructions on page 5).
After use, place the controller in the pouch at the side of the cushion.
The detachable intensity control flap allows you to choose between a softer or more intense massage.
If the Shiatsu massage is too strong, install the flap onto the cushion for a softer massage. You can also place a blanket or towel between you and the massager to reduce the intensity further.
If the Shiatsu nodes cannot reach your lower back area, adjust the height of your back by placing a seat cushion or pillow on the seating part.

Controller Instructions

Shiatsu Area Buttons: Select upper, lower, or full back to designate the area covered by the Shiatsu massage.
Vibration Button: Press to activate the seat vibration. Use the arrow buttons to cycle through low, medium, high, and off settings.
Timer Button: Press to set the massage time at 5, 10, or 15 minutes.
Power Button: Press to turn the device on or off.
Spot Button: Press to keep the Shiatsu function in one area. Use the arrow buttons to adjust the position up or down.
Heat Button: Press to activate heat. The heat function cannot be turned on if the massage function is not activated.
Demo Button: Press for a quick demonstration of the different functions. The LED lights will blink to indicate the active functions. Once complete, the device will automatically turn off.

Care and Cleaning Instructions

Do not wash the product in a washing machine or immerse it or the adapter in water.
Always switch off the device before cleaning and remove the adapter from the socket with clean, dry hands.
Wipe the massager with a slightly moist cloth and ensure thorough drying.
Avoid wiping the product with alcohol or harsh chemicals such as thinner or bleach.
Do not overstretch the elastic back straps.
Keep the product away from heat, fire, or direct sunlight.
Avoid applying excessive pressure or impact onto the massager or massage heads.

Safety Instructions

Please read the following instructions carefully before putting your massage device into use to ensure trouble-free operation and optimum efficiency.Please retain these operating instructions for further use!

The massage device conforms to recognized technical principles and the latest safety regulations.
Do not wet, do not use pins, never remove cover.
This items is NOT A TOY. Close supervision is necessary when this appliance isused by, on, or near children or disabled persons.
This appliance should never be left unattended when plugged in.
Never use any power sources other than a standard 110V wall outlet as original equipment with this unit.
Any possible repairs may only be carried out by authorized expert staff. Improper use and unauthorized repairs are not permitted for safety reasons and lead to loss of warranty.
Never touch the power plug with wet hands.
Please avoid contact of the device with water, high temperatures and direct sunlight.
Do not use any damaged cables, plugs or loose sockets.
Never operate under blankets where the air openingmay be blocked.
If plugs or cords are damaged, they must be replaced by the manufacturer, a service representative or by qualified personnel.
In case of malfunction, disconnect immediately from the mains.
Do not use if you have skin disorders, open wounds, or swollen or inflamed areas.
Misuse or incorrect use excludes any liability for damage.
Do not use this device while driving.
Do not use while vou sleep.
In order to avoid excessively stimulating the muscles and nerves, therecommended massage time should not be exceeded 15 minutes at a time.
The massager is equipped with protection against over-heating for safe use.
Do not use this product for medical treatment.

PLEASE NOTE !

Each massage – even a hand massage – must be refrained from during pregnancy or if one or more of the following complaints are present in the massage area: recent injuries, thrombotic diseases, all kinds of in ﬂammations and swellings, and cancer. It is recommended to consult a doctor before having a massage for the treatment of ailments and illnesses.
If you are dependent on electrical aids e.g. pacemakers, please be sure to consult your doctor for medical advice before taking a massage.
The packaging material supplied should not be used as a toy. Failure to observe the above instructions may constitute misuse of the product and can cause serious injury or burns.

Instruction

Thank you for purchasing Shiatsu massage cushion with heat by Snailax Corpora?on. With normal care and proper treatment, it will provide years of reliable service.
Please read all instruc?ons carefully before using this product.
Please retain this manual for future reference.

FEATURES

Full back Shiatsu massage
Flexible massage nodes
Spot massage
Soothing heat therapy
Seat vibra?on massage
Intensity control ﬂap
Luxury PU leather combines so? mesh cloth

TECHNICAL DATA

Measurements: 40 x 16 inches
Weight: 5.8lbs
Voltage: Input: AC 100-240V ~50/60Hz Output: 12VDC 1500mA
Nominal Power: max. 18 Watt
Automatic runtime: 15 minutes

Setup and Operation

Attach the massager to a chair with elastic straps or place it on another support.
Connect the adapter cable to the corresponding cable on the cushion.
Plug the home adapter into an outlet.
Turn on the device using the controller ( instructions on page 5 ).
When ﬁnished place the controller in the pouch at the side of the cushion.
The detachable intensity control ﬂap lets you choose a softer or more intense massage.
You also may soften the massage pressure by placing a blanket or towel between you and the device.

Attention

If the Shiatsu is too strong,

Install the ﬂap onto the cushion to get a softer massage.
Place a blanket or towel between you and the massager to achieve a far softer massage intensity if you still feel too strong shiatsu after installing the ﬂap onto the cushion.
If the shiatsu can’t reach your lower back area
If you want to massage your lower back, but the shiatsu nodes can not reach that low. You may adjust the height of your back when sitting, by placing a seat cushion or a pillow on the sitting part.
- The device will automatically switch oﬀ after 15 minutes mer running out.
- Remove the adapter from the outlet when not in use.
- Do not setup or use the massager in a bathroom or similar wet/damp areas.

Attention

Yo u should allow your body some rest periods. To avoid straining your muscles to o much, we recommend not exceeding a continuous massage of 15 Minutes per and Not exceeding 3 times use one day.

Controller Instructions

SNAILAX-SL-256-Shiatsu-Massage-Cushion-With-
Heat-fig-4

Care and Cleaning Instructions

Do not wash in washing machine or immerse the product or the adapter in water.
Always switch oﬀ before cleaning and remove the adapter from the socket with clean, dry hands.
The massager should be wiped with a slightly moist cloth and dried thoroughly. Do not wipe the product with alcohol or harsh chemicals such as thinner or bleach.
Do not overstretch the eAlas?c back straps.
Keep away from heat, ﬁre or exposure to direct sunlight.
Do not apply excessive pressure or impact onto massager/massage heads. Applica?on of a direct force in excess of 110 lbs. may damage your massager and invalidate your warranty. Refrain from over usage of the device.
Store the massager in a cool, dry place out of reach of children.
Avoid contact with sharp edges or pointed objects which might cut or puncture the cover of massager.

TROUBLESHOOTING GUIDE

Warranty

If you have any issues about the product, please feel free to contact us by sendingemail to support@snailax.com We will strive to provide the best service possible within 24 hours.

30 days unconditionally Return
Snailax product can be returned to receive a full refund for any reason within 30 days. Please contact our customers service (support@snailax.com), our staﬀ will contact you within 24 hours.

90 days refund/replace
Snailax product can be returned/replaced within 90 days if the product break down in the period of proper use.

12 months Warranty
If the product break down within 12 months in the period of proper use, customers can enjoy the relevant warranty to get them replaced.

Attention!
No warranty will be given to any force majeure and man-made causes to a defective product, such as improper care, personal tear down and willful damage,etc.

Extend Warranty for Free

Enter the following URL or scan the QR code below to ﬁnd Snailax facebook page and like it, enter“Warranty” to messenger to extend your warranty from 1 year to 3 years. https://www.facebook.com/snailax
end message“Warranty” and email us at support@snailax.com to extend your warranty from 1 year to 3 years.

Have question ?

Tel: 734-709-6982
Monday-Friday 9:00AM-4:30PM
Email: support@snailax.com

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

WARNING : Changes or modiﬁcations to this unit is not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

2750 Carpenter Road,
Suite 1 B, Ann Arbor, 48108
Tel:734-709-6982
support@snailax.com
www.snailax.com