DREO DR-HSH004A PTC Fan Heater User Manual

DREO DR-HSH004A PTC Fan Heater

Your support means the world to us. We hope you enjoy our product as much as we did creating it.

EXTEND YOUR WARRANTY FOR FREE
Scan or visit dreo.com/warranty to extend your warranty for free by registering your product. If you have any product issues, we always stand ready to help.

• support@dreo.com
• www.dreo.com
• 888-520-3736
  Mon – Fri, 9:00 am-5:00 pm PST/PDT

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, Including the following:

• Do not cover the air inlet and outlet while in operation.
• Do not use the fan heater near flammables and combustibles.

GENERAL SAFETY

1. Read all instructions before using this heater.
2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
3. Use the handle to move this heater.
4. Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
5. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
6. The output of this heater may vary and Its temperature may become hot enough to burn exposed skin. Use of this heater is not recommended for persons with a high sensitivity to heat or an inability to react to avoid burns.
7. Do not attempt to modify or repair the product by yourself. Doing so could void the warranty and cause damage or personal injury. Only a repair technician may disassemble or repair this product.
8. Make sure that no pieces of polystyrene or other packaging materlal have been left between elements of the appliance. It may be necessary to pass over the appliance with a vacuum cleaner.
9. If the machine is not working as it should, has received a sharp blow, has been dropped, damaged, left outdoors, or dropped into water, do not use and contact Customer Support.
10. There may be a trace of smoke or odor when the unit is first operated. This indicates that a drop of oil fell on the heating coil during the manufacturing process. It will quickly evaporate and should not reoccur.

LOCATION SAFETY

1. Do not use outdoors.
2. Ensure the heater is on a stable, secure surface to eliminate the potential of tipping it over.
3. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
4. A heater has hot and arcing or sparking parts Inside. Do not use it In areas where gasoline, paint, or flammable liqulds are used or stored.
5. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
6. Never locate heater where It may fall Into a bathtub or other water container.

ELECTRICITY SAFETY

1. Always unplug heater when not In use.
2. Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged In any manner. Discard heater, or return to authorized service facility for examination and/or repair.
3. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furiture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
4. To disconnect heater, tum controls to off, then remove plug from outlet.
5. Always plug heaters directly into a wall outlet/receptacle.
6. Never use with an extension cord or relocatable power tap (outiet/power strip).
7. If there Is a loose fit between the plug and the socket or the plug becomes very hot, the socket may need to be replaced. Check with a qualified electrician to replace the socket.
8. It is normal for the plug and cord to feel warm to the touch.
9. A plug or cord which becomes hot to the touch or becomes distorted in shape may be a result of a worn electrical outlet. Worn outlets or receptacles should be replaced prior to further use of the heater. Plugging the heater Into a worn outlet / receptacle may result in overheating of the power cord or fire.
10. This appliance has a polarized plug (one prong is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way, If the plug does not fit fully In the outlet, reverse the plug. If It still does not fit, contact a qualified electrician. Do not attempt to rig this safety feature.
11. This product employs an ALCI. If the ALCI is de-activated this indicates an arcing fault, unplug and check the supply cord and product. If no damage is visible, reset the device by pressing the reset button. If the ALCI de-activates again, a hazardous condition may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.
12. This appliance is provided with a protective device that may make the appliance inoperable under some abnormal conditions. If the appliance becomes inoperable, discard the appliance or return the appliance to a service center for examination and repair.

ALCI (Appliance Leakage Current Interrupter) SAFETY DEVICE:

• This device provides protection against electric shock due to ground fault currents by automati- cally shutting off the power.
• To test the operation of the ALCI Safety Device, switch the heater ON. Press the TEST button on the ALCI device attached to the plug end of the line cord. The heater and fan should stop operating and the Power light should be extinguished. Press the RESET button on the ALCI device to resume normal operation of the heater. This devise should not be used on ON/OFF operation switch.
• Risk of fire. Do not replace attachment plug. Contains a safety device (ALCI) that should not be removed. Discard product if the attachment plug is damaged.
• CAUTION: ALTHOUGH THIS DEVICE IS PROVIDED WITH PROTECTION WHICH REDUCES THE RISK OF ELECTRIC SHOCK, THIS PRODUCT SHOULD NEVER BE USED NEAR WATER.
• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

DANGER
High temperatures may be generated under certain abnormal conditions. Do not partially or fully cover or obstruct the front of this heater.

FOR HOUSEHOLD USE ONLY
READ AND SAVE THESE INSTRUCTIONS

Gentle Reminder:

Specifications

• Model DR-HSH004A
• Rated Power 1500W
• Input 120V~ 60Hz
• Remote Control Battery CR2025, 3V

HOT SURFACE
THE FRONT SURFACE CAN BE VERY HOT DURING USE.DO NOT TOUCH WHEN IN USE.

KNOWING YOUR HEATER

Package Contents

USING YOUR HEATER

Control Panel

Power On/Off
Touch to turn the heater on or off.

Note:

• When the heater is plugged into the electric outlet, the power indicator will light in red.
• Once turned off, a 30-second countdown will show up on the display as the fan will continue to run for 30 seconds to blow out the remaining heat.

Mode Settings
Touch to cycle through -> ECO -> .

• Power Heat with three heating levels: H1(900W), H2(1000W), H3(1500W).
• ECO The heater will automatically select its optimal heating power, depending on the difference between the set temperature (41-95 °F) and ambient temperature.

Note:

• When the ambient temperature reaches the set temperature, the heater will turn off automatically in 30 seconds.
• When the ambient temperature drops below the set temperature, the heater will operate on medium or high power (1000W or 1500W), depending on the difference between the two temperatures.
• Fan only.

Mute/Unmute
To turn on/off the button sounds, long press the Mode button on the panel, or short press the Mute button on the remote.

Auto-Off Timer

• When the heater is on, touch to set a timer (0-12h). After the timer ends, the heater will turn off automatically.
• To cancel, set the timer to 0 hour.

Heat Level/Temperature

• In Power Heat mode, touch or to adjust the heating level.
• In ECO mode, touch or to adjust the set temperature.

Note:
In ECO mode, the heater will turn off automatically when the set temperature has been reached. If your heater turns off frequently, please raise the set temperature, or switch to Power Heat mode.

Oscillation
Touch to turn on or off oscillation.

Safety Tips Before Use

1. This heater can’t handle dense fluid water. Do not splash water on the heater.
2. Place the heater as far as possible from water source like bathtub, shower, and sink.
3. Never place the heater in a
4. Keep the heater on the ground position where it may fall into water. and away from water source.

LED Display

More Features

Memory Function
The heater will remember its last
settings (temperatures, working
modes, oscillation status) once
turned on again.

24-Hour Auto Off

• When the heater has been running continuously for 24 hours, it will shut off automatically for safety reasons.
• To turn this feature OFFION, long press the Timer button for 3 seconds when the heater is off; the display will show “OF” and “ON” respectively.

Tip-Over Protection
When the heater is tipped over, it will shut off automatically with the error code “P4” on the display.

Overheat Protection
When the heater overheats, it will shut off automatically with the error code “FF” on the display.

Remote Control

Battery Replacement

1. Press the locking button to pop out the battery holder.
2. Replace with the same battery type with the (+) side facing up.
3. Push in the holder until securely locked into place.

Note:
If the indicator on the remote control doesn’t turn on any more, please consider replacing the battery.

WARNING
Chemical Burn Hazard. Keep batteries away from children.

• This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the battery, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• The batteries must be disposed of properly, including keeping them away from children. Even used cells may cause injury.

CLEANING AND MAINTENANCE

Cleaning and Maintenance

• Always turn off and unplug before cleaning.
• Outer Surface
  Use a soft, dry cloth to gently wipe clean the outer surface.

Dust Filter

1. Pull out the filter from the back.
2. Rinse the filter under running water.
3. Wait until dry.

TIP:
For best performance, please clean the filter every 2-4 weeks.

Air Inlet
Use a soft, dry cloth or a cotton-tipped swab to remove any dust from the air inlet.

ATTENTION

TROUBLESHOOTING

If your problem is not listed or still persists, contact our Customer Support.

DREO CUSTOMER CARE

Default 12-Month Warranty
This appliance is covered by Dreo warranty for 12 months from the date of its original purchase.

Extend Your Warranty
Extend your warranty by registering your new appliance on our website https://dreo.com/warranty.

The warranty will not apply in cases of:

1. Accident, misuse, or repairs performed by unauthorized personnel.
2. Any unit that has been tampered with or used for commercial purposes.
3. Normal wear and tear of wearable parts.
4. Use of force, damage caused by external influences.
5. Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or noncompliance with the instructions.
6. Partially or completely dismantled appliances.
7. Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been perform ed by a repair person not authorized by Dreo.

We can only provide after-sales service for products that are sold by Dreo or Dreo authorized retailers and distributors. If you have purchased the appliance from a different place, please contact your seller for return and warranty issues.

We’re Here to Help!

• 888-520-3736
  Mon – Fri, 9:00 am-5:00 pm PST/PDT

• support@dreo.com.

• www.dreo.com.

• Shenzhen Hesung Innovation Technology Co., LTD
  26F, Bldg A7, Creative City, Shenzhen, China.

MADE IN CHINA.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>